Audited Supplier
0.5~1.5mm*1500mm
2 Years
CE, ISO9001
Customized
New
Automatic
0.5~3.0mm
135kw
Cr12 MOV
Carbon Steel, Galvanized Steel
12tons
50-1500mm
0-60m/Min
10PCS/2mm
+/-0.05mm
20m *7.8m *2m
BMS
Naked and Covered by Plastic Film Into Container
China (Mainland)
8455221000
Product Description
0.5~1.5mm*1500mm High Speed 60M/min Slitting Line With 24 Pieces Kinife Blade
Thickness:0.5-1.5mm
Applicable Material:Carbon Steel,Galvanized Steel
With Yield Strength:235-550Mpa
Product Speed:0-60m/min
Equipment Overview and Composition
Thickness:0.5-1.5mm
Applicable Material:Carbon Steel,Galvanized Steel
With Yield Strength:235-550Mpa
Product Speed:0-60m/min
Equipment Overview and Composition
Loading trolley
Hydraulic decoiler
Slitting Machine
Scrap coiler
Looper bridge
Double spacer shaft, hydraulic tension station
Hydraulic coiler
Discharging trolley
Hydraulic system
Electric control system
Hydraulic decoiler
Slitting Machine
Scrap coiler
Looper bridge
Double spacer shaft, hydraulic tension station
Hydraulic coiler
Discharging trolley
Hydraulic system
Electric control system
Hydraulic Decoiler
Main structure: steel plate, four arc-shaped plates, slider, main shaft, side plate, bearing, bearing seat, expansion diameter: Φ460mm~Φ520mm×1300mm, bearing 7 tons. Air clamping disc brakes, etc.
Hydraulic power: push-pull expansion and contraction mandrel: hydraulic cylinder: FA-Φ180mm (1 unit).
Electric power: feeding rotation: 7.5KW cycloid needle motor with frequency converter and chain drive (1 set).
Main structure: steel plate, four arc-shaped plates, slider, main shaft, side plate, bearing, bearing seat, expansion diameter: Φ460mm~Φ520mm×1300mm, bearing 7 tons. Air clamping disc brakes, etc.
Hydraulic power: push-pull expansion and contraction mandrel: hydraulic cylinder: FA-Φ180mm (1 unit).
Electric power: feeding rotation: 7.5KW cycloid needle motor with frequency converter and chain drive (1 set).
Slitting Machine
(1)Main structure: steel plate, casting seat, synchronous gear box, universal joint drive, electric screw lifting device.
(2) Material of cutter shaft: 40Cr, diameter of cutter shaft: Φ160mm×1500mm, intermediate frequency treatment, grinding, hard chrome plating after quenching and tempering rough machining, with keyway 20mm.
(3) The diameter of the blade is Φ300mm (purchased by Party A).
(4) Knife shaft locking: The nut locks the tool.
(5) A set of pressure plate adjustment brackets, which can be adjusted up and down, and used for fixing wooden slats.
(6) Main bearings: domestic high-quality bearings.
(7) Knife holder movement: hydraulic in and out, tool shaft up and down, electric synchronization.
(8) Manual side guide position.
Shearing power: 45KW ordinary motor with frequency converter
(1)Main structure: steel plate, casting seat, synchronous gear box, universal joint drive, electric screw lifting device.
(2) Material of cutter shaft: 40Cr, diameter of cutter shaft: Φ160mm×1500mm, intermediate frequency treatment, grinding, hard chrome plating after quenching and tempering rough machining, with keyway 20mm.
(3) The diameter of the blade is Φ300mm (purchased by Party A).
(4) Knife shaft locking: The nut locks the tool.
(5) A set of pressure plate adjustment brackets, which can be adjusted up and down, and used for fixing wooden slats.
(6) Main bearings: domestic high-quality bearings.
(7) Knife holder movement: hydraulic in and out, tool shaft up and down, electric synchronization.
(8) Manual side guide position.
Shearing power: 45KW ordinary motor with frequency converter
Electric Control System
(1) There are three electronically controlled main and auxiliary consoles.
(2) Power supply voltage: three-phase 380VAC±10% frequency: 50Hz±1
(3) Composition and purpose: The system has a main console. The whole line adopts centralized control, and the main console has functions such as digital display, high and low speed adjustment, manual feed, continuous slitting, and fault alarm. Main console, sub-console, button box, detection components and cables and wires. Ensure the safe and efficient operation of the production line.
(4) Total electrical
1 Inverter domestic high-quality brand-name products
2 Ordinary motor, domestic high-quality brand-name products
3 button Izumi, Japan
4 Intermediate relay Germany Micro Demuller
5 Cylinder sealing ring imported
6 Hydraulic valve parts Domestic high-quality brand-name products
7 Pneumatic components, domestic high-quality brand-name products
8 Cycloid reducer Domestic high-quality brand-name products
9 Universal coupling Domestic high-quality brand-name products
(1) There are three electronically controlled main and auxiliary consoles.
(2) Power supply voltage: three-phase 380VAC±10% frequency: 50Hz±1
(3) Composition and purpose: The system has a main console. The whole line adopts centralized control, and the main console has functions such as digital display, high and low speed adjustment, manual feed, continuous slitting, and fault alarm. Main console, sub-console, button box, detection components and cables and wires. Ensure the safe and efficient operation of the production line.
(4) Total electrical
1 Inverter domestic high-quality brand-name products
2 Ordinary motor, domestic high-quality brand-name products
3 button Izumi, Japan
4 Intermediate relay Germany Micro Demuller
5 Cylinder sealing ring imported
6 Hydraulic valve parts Domestic high-quality brand-name products
7 Pneumatic components, domestic high-quality brand-name products
8 Cycloid reducer Domestic high-quality brand-name products
9 Universal coupling Domestic high-quality brand-name products
PLC Control System
Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen ,It Can Finish The Production Automatically.
| Combined With | PLC, Inverter, Touch Screen, Encoder, etc |
| PLC | Siemens (German brand)/Schneider(French brand) |
| Inverter | Siemens (German brand)/Schneider(French brand) |
| 7-Inch Color Touch Screen | Siemens (German brand)/Schneider(French brand) |
| Encoder | Omron (Japan brand)Switch Bottom, Indicate Light, Power Supply, Intermediate Relay, AC Contactor |
| Thermal Relay | Siemens(German brand)/Schneider(French brand) |
| Air Switch | LG-LS(Korea brand) Cut-to-Length Tolerance≤±1 mm Control Voltage 24V |
After-Sale Service
1. The warranty is 24 months after the client receives the machine.
Within The 24months, we will courier the replacement parts to the client free of charge
2.We offer technical support for the entire life of our machines
3. We can send our technicians to install and train the workers in the clients' factories with extra cost
Terms Of Trade
| Minimum order quantity (MOQ) | 1 Set |
| Delivery time | about 70 workdays |
| Port of loading | port of Xiamen |
| Type of payment | by T/T or by L/C |
| Export | to more than 80 countries and regions, including South Korea, Taiwan, UK, Ireland, Greece, Australia, USA, Mexico, Brazil, Russia, Saudi Arabia, UAE, Iran , India, Singapore, Malaysia, Thailand, Indonesia, Philippines, Vietnam, South Africa, Nigeria, Egypt, etc |
Packing Style
| Packing method | Main body of machine is naked and covered by plastic film(to protect of dust and corrosion), loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation. |
View more products,click here...
