Audited Supplier
Connection drawing
1.Trait:E-M3L-PP Semiautomatic bottle blow molding machine is special for making PP bottles, also can making PET containers,including the bottles for kinds of wine, drink,soybean, vinegar, and pesticide (less than 1.5Liters) according to the different bottle shape and diameter. It has automobile system with high efficiency. The distant infrared ray heat pipe are used in the machine ,It has high pressure protection with the feature of precisely removing mould ,The machine has less noise ,It is easy to maintain ,It's the equipment for producing PET bottles .
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.
2. Engineering item:
Capacity: 500-800pcs/hr
Max volume of product: 1.5Liter-2cavities
3.Machine Configurations:
| Product Name | Brands Name |
Touch screen | XINJIE (China ) |
Stretch Cylinder | YONGCHENG (China) |
Clamping Cylinder | YONGCHENG (China) |
Electromagnetic valve  | AirTac(Taiwan,China) |
HP blowing valve | Quanjia (China) |
Temperature Controller | Aoyi(China) |
MTC Module | Zhenyu(China) |
Circuit breaker | PEOPLE (China ) |
| Air compressor | Unit | 1.2M3/30KG |
| Volume | M3 | 1.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 670 |
| Power | KW | 15 |
| Overall Dimension | mm | 1900×855×1250 |
| Weight | kg | 640 |
| Refrigeration Air Dryer | Unit | 2.0M3/3.0Mpa |
| Flow capacity | Nm3/min | 2.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤80 |
| Dew point | ºC | 23 |
| Ambient Temp. | ºC | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | R22 | |
| Overall Dimension | mm | 1000*570*850 |
| Weight | Kg | 100 |
3.2. T grade equip the automatic blow down valve (Inlet pressure ≥ 1.0Mpa is not equipped );
3.3. rate of getting rid the free state moisture and the Filt diameter seeing the following form :
| Type | Rate of getting rid moisture | Filt diameter |
| T | 99.9% | ≤1µm |
| A | 99.99% | ≤0.01µm |
| H | 99.99% | ≤0.01µm |
| 1. Filter T (Model No: NTLN-2.0/30T) | |||||
| NO. | Name | Specification | NO. | Name | Specification |
| 1 | Rating flow | 2.0m³/min | 2 | Operation pressure | 3.0Mpa |
| 3 | Inlet temperature | ≤65ºC | 4 | Resid | 5ppm |
| 5 | Filter precision | 3um | 6 | Filter rating | Level T |
| 2. Filter A (Model No: NTLN-2.0/30A) | |||||
| NO. | Name | Specification | NO. | Name | Specification |
| 1 | Rating flow | 2.0m³/min | 2 | Operation pressure | 3.0Mpa |
| 3 | Inlet temperature | ≤65ºC | 4 | Resid | 0.01ppm |
| 5 | Filter precision | 0.01um | 6 | Filter rating | Level A |
| 3. Filter H (Model No: TCJL-2.0/30H) | |||||
| NO. | Name | Specification | NO. | Name | Specification |
| 1 | Rating flow | 2.0m³/min | 2 | Operation pressure | 3.0Mpa |
| 3 | Inlet temperature | ≤65ºC | 4 | Resid | 0.01ppm |
| 5 | Filter precision | 0.01um | 6 | Filter rating | Level H |
| Model | 3HP | |
| 4.4/38ºC Cooling capacity(Kcal/h) | 7580 | |
| Compressor | All-closed vorticity | |
| Compressor power (KW) | 2.5 | |
| Refrigerant | R22 | |
| Chilled water pump power(KW) | 0.75 | |
| 10ºC Max. flow rate of chilled water(L/min) | 55 | |
| Flow water inlet and outlet pipe | 1'' | |
| Condensing water rate L/min | ≥36 | |
| Chilled water inlet and outlet pipe | 1'' | |
| Exterior dimension | Length(mm) | 850 |
| Width(mm) | 560 | |
| Height(mm) | 870 | |
| Water tank capacity | L | 38 |
| Weight | Kg | 180 |
| ITEMS | UNIT | E-M3L | E-M3L-2 | E-M3L-2H | E-M3L-PP | E-M5L-Jar |
| BOTTLE SPECIFICATION | ||||||
| Cavity No. | CAVITY | 2 | 2 | 2 | 2 | 1 or 2 |
| Max.Bottle Volume | L | 2 | 2 | 1 | 1.5 | 6 |
| Max.Neck Diameter | MM | 75 | 75 | 48 | 70 | 120 |
| Max.Bottle Diameter | MM | 105 | 105 | 80 | 95 | 105 |
| Max.Bottle Height | MM | 340 | 340 | 280 | 320 | 350 |
| Theoretical output/BPH | 800-1000 | 1800-2000 | 800-1000 | 500-800 | 400-800 | |
| CLAMPING | ||||||
| Clamping Force | KN | 100 | 100 | 100 | 80 | 100 |
| Mold Stroke | MM | 160 | 160 | 120 | 140 | 230 |
| Stretching Stroke | MM | 380 | 380 | 340 | 360 | 380 |
| ELECTRICAL POWER | ||||||
| Installed Power | KW | 18 | 35 | 18 | 40 | 18 |
| Voltage/Frequency | V/HZ | 3P 380V±10%, 50HZ/3P 220V±10%, 60HZ | 3P 380V±10%, 50HZ/3P 220V±10%, 60HZ | |||
| AIR SYSTEM | ||||||
| Operating Pressure | Bar | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 |
| Blowing Pressure | Bar | ≤35 | ≤35 | ≤35 | ≤35 | ≤35 |
| HP Air Consumption | L/min | 1000 | 2000 | 3200 | 1600 | 1200 |
| MOLD COOLING WATER | ||||||
| Temperature Range | ºC | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
| Cooling Power | HP | 3 | 3 | 3 | 3 | 3 |
| MACHINE | ||||||
| Machine Size | M | 1.47x0.61x1.6 | 1.47x0.61x1.6 | 1.47x0.61x1.6 | 1.47x0.61x1.6 | 1.72x0.61x1.68 |
| Machine Weight | KG | 600 | 600 | 600 | 600 | 680 |
| Machine Size | M | 1.76x0.6x1.35 | 2.23x0.6x1.35 | 2.23x0.6x1.35 | 4.65x0.68x1.5 | 1.76x0.6x1.35 |
| Machine Weight | KG | 250 | 300 | 300 | 400 | 250 |
Taizhou Easy Star Machinery Co.,Ltd. is a professional manufacturer of blow molding machines,preforms and plastic molds in China. We can provide a full range of services, whether it is molds, production machines, complete production lines, E-star can give you the best solution.
E-star's main products are various types of blowing machines. Plastic molds and other series of products. The products have the advantages of high degree of automation and stable performance. And are well received by domestic and foreign customers. Among them. The full-electric blow molding machine has reached the international leading level, and the products are exported to Europe, America, the Middle East, Southeast Asia and other places. Even in harsh climates(cold or tropical),E-star blow molding machines can operate stably. We have pre-sales and after-sales service teams, so your machine can get the best guarantee.
With more than 20 years of development experience and a highly fexible production development team, we can discuss and customize requirements for each case to create a financial tool that meets your needs. Whether it is used in Beverages,Water, Edible oil,Daily necessities, Cosmetics,etc.,
E-star's blow molding machines can help you complete the production of PET bottles of various capacities.
Q:Where is your factory located?
A:Our factory,near Shanghai, located in Taizhou,China
Q:What is your trade term?
A:Normally FOB NINGBO, if customer country requires, also can accept L/C at sight.
Q:What is your payment term?
A:30% down payment against order confirmation, 70% balance payment prior shipment.
Q:Have blow machine 100% assembled well in stock?
A:No. All blow machine will be assembly produced according to your order.
Q:What is your delivery time?
A:Usually in 45-60days, depends on your projects.
Q:What about installing in customer factory?
A:After machine arrived at your factory, please prepare water, electric,air and preform, then we will arrange engineer to install machine and train your workers, the longest time to free install shall be in one week, you should afford engineer air tickets, food, hotel,transport.
Q:Guarantee time?
A:One and a half year guarantee, not man-made.
