Audited Supplier
Geocell Grid System for Driveway Reinforcement Soil Reinforcement and Slope Protection by Geocell 50-800 100-900 75-800 200-600
Introduction
meshcell structure formed by high strength welding of reinforced HDPE sheet material.Due to engineering needs, some need to be drilled in the diaphragm.During construction, it can be stretched into a network and filled with loose materials such as soil,
gravel,concrete, etc., to form a structure with strong lateral restrictions and large stiffness.The Plastic Geocell Cellular Confinement System features a three-dimensional, honeycomb-like structure made from high-density polyethylene (HDPE).
Main Feature:
1.It's extractile,flexible to fold and convenient for transportation.
2.It can be filled with soil, gravel,earth,macadam and so on when being stretched into network.
3.It has light material, wear resistance, acid and alkali resistance, anti aging.
4.It is anti-skid and anti-deformation and also has a higher lateral limit, which can reduce the thickness of roadbed.
Product Type | Smooth and Not Perforated | Smooth and Perforated | Textured and Not Perforated | Textured and Perforated |
Height (mm) | 50≤H≤250 | 50≤H≤250 | 50≤H≤250 | 50≤H≤250 |
Welding Distance(mm) | 330≤A≤1000 | 330≤A≤1000 | 330≤A≤1000 | 330≤A≤1000 |
Thickness (mm) | 1.0- 1.2 | 1.0- 1.2 | 1.3- 1.7 | 1.3- 1.7 |
Seam Peel Strength of Welding Point (N/cm) | ≥100 | ≥100 | ≥100 | ≥100 |
Tensile Strength of Connection of Cells (N/cm) | ≥120 | ≥120 | ≥120 | ≥120 |
Tensile Strength at Yield of Each Sheet (N/cm) | ≥200 | ≥200 | ≥200 | ≥200 |
Materials Properties | Test method ASTM | UNIT | |
Cell Height | mm | 75 100 150 200 | |
Polymer Density | D1505 | g/cm3 | 0.935-0.965 |
Environmental Stress Crack Resistance | D5397 | Hours | >400 |
Environmental Stress Crack Resistance | D1693 | Hours | 6000 |
Carbon Black Content | D1603 | % | 1.5%-2.0% |
Nominal Sheet Thickness Before Texturing | D5199 | mm | 1.27-5%,+10% |
Nominal Sheet Thickness After Texturing | D5199 | mm | 1.52-5%,+10% |
Strip Puncture Resistance | D4833 | N | 450 |
Seam Peel Strength | EN ISO 13426-18 | N | 1065 1420 2130 2840 |
Seam Efficiency | GRI-GS13 | % | 100 |
Nominal ExpandedCell Size (width *length) | mm | 475*508, 500*500 etc | |
Nominal Expanded Panel Size (width length) | mm | 2.56*8, 4.5*5.0, 6.5*4.5, 6.1 *2.44 |
It is mainly used for
1.foundation reinforcement(ground stabilization:)
2.soft foundation treatment,
3.steep slope protection,
4.landslide prevention,
5.load-bearing mixed retaining wall.
6.It is especially suitable for weathering forests, sand streams and marshes.
Q1. Can you do OEM?
A1. Yes.of course.We can produce the products as your requests.
It would be better if you could provide us with samples.
Q2. If I want to order a small quantity goods,can you do it?
A2. If the product you need we have stock available,then it is OK. But if no stock available, don't worry, we can take your order with our other clients' order to produce together, but it needs to wait some time.
Q3. Can I get a sample from your company?Should I pay for the express fee?
A3. If you can accept our available sample,we can offer free sample to you. After confirming your order, the sample's freight cost will be refunded.
Q4. How will you follow my order?
A4. When the goods are started to produce, we will take photos for the goods and send it to you.
