100% Pure Polyurea Spray Polyurea for Waterproof Floor Anti-Corrosion

Spray polyurea waterproof coating is a spray type two components elastic coating composed of components A and B. Component A is a semi prepolymer prepared by the reaction of isocyanate with oligomer Diol or ternary alcohol, and component B is composed of amino terminated resin, hydroxyl terminated resin, amine chain extender, pigment and additives. Elastic polyurea material formed through on-site spraying with professional equipment. This product has excellent mechanical properties, medium resistance, outdoor aging resistance, and excellent adhesion.

1)Workshop floors, storage tanks, neutralization tanks, drainage ditches, etc. In chemical, petroleum, petrochemical and other industries;
2)Structures such as landfills, sewage treatment ponds, and exhaust gas filtration towers;
3)The anti-corrosion and wear-resistant protection of the production workshop and warehouse floors;
4)Steel structure platforms such as metal pipelines, bridges, ship decks, etc.
5)Roof waterproofing, exterior wall waterproofing, and exterior wall repair as new.
6)Sports stands, anti-seepage, wear-resistant flooring.
7)Water parks, swimming pools, and aquatic products.

A 220kgs/drum B 210kgs/drum

Sealed and stored in dry, cool, and well ventilated conditions, avoid exposure to sunlight and rain, and keep away from ignition sources. Under the original packaging state and specified storage conditions, the product has a shelf life of 6 months from the production date. If the storage period exceeds, inspection can be carried out according to the items specified in this product standard. If it meets the technical requirements, it can still be used. Please use it as soon as possible after opening, and it must be resealed and stored when not in use. This product does not contain organic solvents and can be transported as a non hazardous material. During transportation, rain and sunlight should be strictly prohibited to avoid severe collisions. Materials should be neatly and stably stacked, and should comply with relevant regulations of the transportation department.

Base surface requirements: The concrete base surface should be cleaned, repaired flat, and polished to a certain roughness. Ensure that the concrete curing is completed, the strength reaches C25 or above, and the moisture content is less than 8%. After processing the base surface, the next process should be carried out as soon as possible.
Environmental temperature and humidity requirements: The construction environment temperature should be between 5~35 ºC, and the base surface temperature should be at least 5 ºC higher than the air dew point temperature; The humidity range should be between 30% and 80%. Ventilation conditions: Ventilation should be maintained during construction, but construction should not be carried out when there is strong wind.

Base surface requirements: The concrete base surface should be cleaned, repaired flat, and polished to a certain roughness. Ensure that the concrete curing is completed, the strength reaches C25 or above, and the moisture content is less than 8%. After processing the base surface, the next process should be carried out as soon as possible.
Environmental temperature and humidity requirements: The construction environment temperature should be between 5~35 ºC, and the base surface temperature should be at least 5 ºC higher than the air dew point temperature; The humidity range should be between 30% and 80%. Ventilation conditions: Ventilation should be maintained during construction, but construction should not be carried out when there is strong wind.

Mix component B of the coating evenly before use A: B=1:1 (volume ratio) Professional construction teams must use professional spraying equipment for construction, and the material temperature during spraying should be controlled between 50~80 ºC.
In general, the next process can be carried out after 12 hours of painting. If the construction interval exceeds 24 hours, a layer of interface agent needs to be applied before construction can proceed. If encountering adverse weather such as rain after coating, a layer of interface agent must be applied before proceeding to the next process.
Under normal circumstances, the paint film should be cured for at least 7 days after completion of painting to ensure the best performance of the paint film.

Suggested Use QTY
1.2kg/mm/m2,
waterproof national standard thickness 1.5mm, single square meter  dosage 1.8kg,
anti-corrosion national standard thickness 2.0mm, dosage 2.4kg.