IP Unknown
MadeInChina.com > Electrical & Electronics > Power Supply & Distribution > Switching Power Supply
 
 

1000V 10A Rack Mount Programmable High Voltage DC Power Supply

Price Negotiable Compare
Min Order 1 Piece
Shipping From Jiangsu, China
Popularity 236 people viewed
Quantity
+-
 

Yangzhou Idealtek Electronics Co., Ltd.

VIP   Audited Supplier 9 years
Profile Certified by SGS/BV
Visit Homepage Product Catalog
CSP10HH10
Single
1 Year
10kw
380V
Series Switching Power Supply
Self-excited Switching Power Supply
Width Modulation Type
Terminal Power Distribution Equipment
One-way Transmission
PWM
Idealtek
0 ~ 1000.0V
0 ~ 10.00A
IGBT Based AC/DC High Frequency Conversion
Constant Voltage / Constant Current
Silica Gel Buttons & Stepless Knobs
4.3-Inch LCD Display
RS485 Communication Interface
Ovp, Ocp, Otp
Forced-Air Cooling
Ral 7035
Component or Device Burn-in Test, Routing Test
iDealTeknic
Plywood Case
IGBT & HF transformer
China
8504401990
Product Description
CSP10HH10 Programmable DC Power Supply
  1. Rated power range: 10KW
  2. Rated voltage range: 0 ~ 1000V
  3. 5 - digit voltage display voltage and 4 - digit current display, with a maximum resolution of 10mV and 10mA.
  4. High programming accuracy, high output accuracy, and low ripple noise.
  5. Excellent dynamic response time <10ms.
  6. Output start - up without overshoot, and can set the rising slope of voltage and current.
  7. Real-time power display.
  8. RS232 / RS485 communication interface.
Overview
CSP10HH10 is the 1000V 10A DC output power model of the programmable DC power supply products. It adopts a 19-inch 3U standard rack-mounted chassis with the designed output power of 10KW. It has the wide programmable DC output voltage range from 0 to 1000Vdc, the 10KW programmable power supplies are widely used for production line manufacturing test, photovoltaic plate aging test and various programmable DC power supply cutting-edge applications.

The mature IGBT high frequency switching power topology design and all-digital signal control loop endow the 10KW programmable DC power supplies with high-precision, low ripple, high power density, high efficiency and fast response speed electronic characteristics, and the microprocessor unit with built-in control program allows the DC power supply to achieve flexible and efficient programming control through the front panel silica gel buttons and stepless knobs. The 4.3-inch LCD with up to 5 digits display resolution ensures high-precision programming and monitoring levels to make this programmable DC power supplies' measurement results accurate and reliable.

At the same time, the 10KW programmable DC power supplies are equipped with RS485 interface as standard, following the MODBUS-RTU international protocol, which can realize remote control programming, test results save and uploading to the master unit and status monitoring of the power supply.
Features
  1. The power supply chassis is produced using laser technology, with unique color matching and excellent baking paint production technology, which gives the power supply generous and elegant appearance.
  2. The internal circuit boards of power products all produced by PCBA and DIP process, to reduce human faults. The production adopts process inspection for each step, which reduces the defective assembly rate and further improves product reliability.
  3. Firm and reliable internal structure design and high-quality packaging reduce the probability of damage that may be caused by transportation.
  4. The power supply adopts LCD display, preset voltage / current values, output voltage / current values, real-time power, local / remote working mode & start / stop status are all displayed on LCD interface, which is convenient for customers to control & monitor the status of DC power supply.
  5. High display accuracy: 0.1% voltage display accuracy in CV mode, 5 digits voltage display with minimum 10mV resolution; 0.2% current display accuracy in CC mode, 4 digits current display with minimum 10mA resolution.
  6. The power supply can be used as a constant current source for its low output current ripple while ensuring low voltage ripple.
  7. The power supply voltage and current have almost no starting impact, and the power output dynamic response time is excellent
  8. With output programming function, you can edit step waveforms, pulse waveforms, etc., and the rising slope of the voltage and current.
Block diagram
Applications
  1. LED and energy-saving lamps aging test.
  2. Switching power supply and power adapter aging test.
  3. Photovoltaic inverter aging test.
  4. Aerospace and national defense industry.
  5. Testing and aging of electric vehicle motors, controllers, and DC motors
  6. Capacitors, resistors, relays, transistors, sensors and other electronic devices.
  7. Electrolytic, electroplating, and corroded aluminum foil processing.
  8. LCD, touch screen test.
  9. Automotive electronics, DC motor, motor controller, cigarette lighter, audio and video burn-in test.
Featured functions
Programming function
The power supply has output programmable function for 10 groups of different parameters and the number of cycles. Such as initial voltage/current value, final voltage/current value, hold time and other parameters setting. And, it can realize multi-step continuous output, single-step output and cyclic output functions. Different modes such as voltage step and voltage sequence can also be realized.
Excellent dynamic response speed
No overshoot at output start-up & Settable output voltage and current rising slope
Ultra-high output display accuracy
1
Comprehensive information LCD display
Preset voltage/current value; output voltage/current value; real time power; local/remote control working mode; power supply start/stop status information can be displayed in the LCD on the power supply front panel at the same time, which is convenient for customers to monitor the status of the DC power supply.
Specifications
InputPhaseThree - phase
Voltage380Vac±10%
Frequency50Hz/60Hz
Power factor>0.92
OutputDC VoltageAccuracy<0.2% of rated value (CV mode)
Load regulation
(0 ~ 100% load variance)		<0.05% of rated value
Line regulation
(±10%△UAC)		<0.05% of rated value
Regulation time
(10% ~ 100% load variance)		<10ms
Rise time from 10% to 90% loading<500ms ~ 10s
DC CurrentAccuracy<0.3% of rated value (CC mode)
Load regulation
(1% ~ 100% load variance)		<0.15% of rated value
Line regulation
(±10%△UAC)		<0.05% of rated value
DC PowerAccuracy<0.5% of rated value
Isolation withstand voltageAC Input to Shell1500VDC
AC Input to Output1500VDC
DC Output to Shell500VDC
Protection functionsOutput voltage - limiting protection, output current - limiting protection, output power - limiting protection and over temperature protection
Communication portRS232 or RS485
In line with MODBUS-RTU standard.
Cooling methodForced air cooling
Working temperature-5ºC ~ 45ºC
Storage temperature-20ºC ~ 60ºC
Relative humidity<80%(non-condensing)
Size (W*H*D) (mm)425*132*552
WeightApprox. 24Kg
Power Supply Front and Rear Panels Description
Front panel description
IMG_260
Key button identificationKey button description
CVSwith to power supply output voltage value setting
CCSwith to power supply output current value setting
L/RLocal / Remote control switching
0~9Number key buttons
CReturn key button
OKEnter key button
ON/OFFPower supply output ON / OFF control
Rear panel description
No.Description
1DC output terminal, red is positive pole and black is negative pole.
2The cooling fan air duct, NO blocking!
3RS485 / RS232 communication interface
4AC power connection terminal, make sure of well grounding.
Power Supply Chassis Drawing
Standard model list
ModelCSP10H10HCSP20H60CSP30H30CSP40H25CSP50H20CSP60H15CSP75H12CSP10HH10
Rated power10KW
Rated voltage100.00V200.00V300.00V400.00V500.00V600.00V750.00V1000.00V
Rated current100.0A50.00A30.00A25.00A20.00A15.00A13.00A10.00A
Voltage RippleVrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%
Installation environment
  1. Ambient temperature: Please have the power source working in safe temperature range (0ºC ~ 45ºC) or it would affect life of power source.
  2. Please install the power source at least 50cm distant from surroundings to have better ventilation.
  3. Please install the power source away from vibration (less than 0.6G), especially equipment like puncher.
  4. Keep the power source away from direct sunshine, humidity or place with water globule.
  5. Keep the power source from corrosive, flammable & explosive gas.
  6. Keep the power source away from oil stain, dust & metallic dust.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
MadeInChina.com 86-025-66775089 Monday to Friday 09:00-18:00 Email: service@madeinchina.com
Source on MadeInChina
Request for Quotation
Search Products
Find Suppliers
Join Free
Customer Services
Terms of Use
Privacy Policy
Payment and Security
Submit a Complaint
About us
About MadeInChina
Contact Us
Online Inquiry
FAQ

Scan on mobile