Audited Supplier
E Glass Fiberglass Unidirectional fabric is a stitch-bonded composite reinforcement combining continuous roving oriented in the 0°or 90°directions into a single fabric. Two layers of roving With or without a layer of chopped strands (0g/m²-300g/m²). It can be with mat or without mat It is ideal for applications such as wind blades, marine panel, snowboards, truck and trailer panel.
| Product No. | Overall Density (g/m2) | +0°Roving Density(g/m2) | 90°Roving Density(g/m2) | Chop Density (g/m2) | Polyester Yarn Density (g/m2) |
| EKUDL300 | 312 | 261 | 39 | / | 12 |
| EKUDL400 | 412 | 355 | 45 | / | 12 |
| EKUDL460 | 469.5 | 413 | 47 | / | 9.5 |
| EKUDL600A | 612 | 533 | 67 | / | 12 |
| EKUDL600 | 612 | 480 | 120 | / | 12 |
| EKUDL800 | 812 | 710 | 90 | / | 12 |
| EKUDL950 | 956 | 866 | 84 | / | 6 |
| EKUDL1000 | 1022 | 710 | / | 300 | 12 |
| EKUDL1200 | 1195 | 1134 | 55 | / | 6 |
| EKUDT125 | 126 | / | 120 | / | 6 |
| EKUDT300 | 309.5 | / | 300 | / | 9.5 |
| EKUDT500 | 509.5 | / | 250 | / | 9.5 |
| EKUDT600 | 609.5 | / | 600 | / | 9.5 |
E Glass Biaxial Fiberglass Fabric is a stitch-bonded composite reinforcement combining continuous roving oriented in the 0,90 or +45,-45 directions into a single fabric. Can be stitched (50-500)g/m2 CSM or Nonwoven fabric on the bottom. It can be with mat or without mat It is ideal for applications such as wind blades, marine panel, snowboards, truck and trailer panel.
+ 45 / -45°
| Product No. | Overall Density(g/m2) | +45°Roving Density(g/m2) | -45°Roving Density(g/m2) | Chop Density(g/m2) | Polyester Yarn Density(g/m2) |
| EKBX160 | 172 | 80 | 80 | / | 6 |
| EKBX240 | 233 | 106 | 106 | / | 6 |
| EKBX300 | 306.7 | 150.33 | 150.33 | / | 6 |
| EKBX400 | 407 | 200.5 | 200.5 | / | 6 |
| EKBX450 | 457 | 225.5 | 225.5 | / | 6 |
| EKBX600 | 607.2 | 300.6 | 300.6 | / | 6 |
| EKBX800 | 807.6 | 400.8 | 400.8 | / | 6 |
| EKBX1200 | 1208.6 | 601.3 | 601.3 | / | 6 |
| EKBXM400/225 | 632 | 200.5 | 200.5 | 225 | 6 |
| EKBXM600/225 | 832.2 | 300.6 | 300.6 | 225 | 6 |
| EKBXM800/450 | 1257.6 | 400.8 | 400.8 | 450 | 6 |
| EKBXM1208 | 682 | 200.5 | 200.5 | 275 | 6 |
| EKBXM1308 | 732 | 225.5 | 225.5 | 275 | 6 |
| EKBXM1708 | 882.2 | 300.6 | 300.6 | 275 | 6 |
| EKBXM2408 | 1082.6 | 400.8 | 400.8 | 275 | 6 |
0º / 90º
Product No. | Overall | 0º Roving | 90º Roving | Chop Density | Polyester Yarn Density |
LT400 | 409.5 | 202 | 198 | / | 9.5 |
LT600 | 609.5 | 330 | 270 | / | 9.5 |
LT800 | 809.5 | 412.5 | 387.5 | / | 9.5 |
LT1200 | 1209.5 | 605 | 595 | / | 9.5 |
LTM400/200 | 609.5 | 202 | 198 | 200 | 9.5 |
LTM600/300 | 909.5 | 330 | 270 | 300 | 9.5 |
LTM600/450 | 1059.5 | 330 | 270 | 450 | 9.5 |
LTM800/250 | 1059.5 | 412.5 | 387.5 | 250 | 9.5 |
LTM800/300 | 1109.5 | 412.5 | 387.5 | 300 | 9.5 |
LTM800/450 | 1259.5 | 412.5 | 387.5 | 450 | 9.5 |
LTM1608 | 835.5 | 275 | 276 | 275 | 9.5 |
LTM1808 | 894.5 | 330 | 280 | 275 | 9.5 |
LTM2408 | 1092 | 412.5 | 395 | 275 | 9.5 |
LTM2415 | 1274.7 | 412.5 | 395 | 457.7 | 9.5 |
LTM3208 | 1381.5 | 605 | 492 | 275 | 9.5 |
E Glass Fiberglass Quadraxial Fabric It is a stitch-bonded composite reinforcement combining continuous roving oriented in the 0° +45°90°,-45°directions into a single fabric. Multi-axial fiberglass facrics are made from rovings. The rovings placed parallel in each layer in a designed direction could be arranged 2-6 layers, which are stitched together by light polyester threads. The general angles of the placing direction are 0,90,±45 degree. Unidirectional knitted fabric means main mass is in a certain direction, for example 0 degree. It is applied for vacuum infusion or winding process and mainly used for the production of wind blades, pipes, and so on. They are available for epoxy(EP), polyester(UP), and vinyl resin (VE) systems.
| Product No. | Overall Density(g/m2) | +0°Roving Density(g/m2) | +45°Roving Density(g/m2) | 90°Roving Density (g/m2) | -45°Roving Density(g/m2) | Chop Density (g/m2) | Polyester Yarn Density(g/m2) |
| HTQX600 | 601.4 | 144.7 | 150.4 | 150 | 150.4 | / | 6 |
| HTQX800 | 823.8 | 216 | 200.5 | 200.8 | 200.5 | / | 6 |
| HTQX1000 | 954 | 216 | 248 | 236 | 248 | / | 6 |
| HTQX1150 | 1178.7 | 294 | 300.6 | 283.5 | 300.6 | / | 6 |
| HTQX1200 | 1201.2 | 294 | 300.6 | 300 | 300.6 | / | 6 |
| HTQX1600 | 1620 | 434 | 308 | 564 | 308 | / | 6 |
Easy shape adaptation
Easy impregnation
Excellent mechanical properties
No any Binder, good compatible with Multi-Resin
simplify the molding process
improve producing efficiency and decrease cost
Roll width
Standard width in 1250mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
Inner side Plastic Film Carton + Non wooden Pallet Container Loading
Unless otherwise specified, the fiberglass products should be in dry, cool and moisture-proof area. The room temperature and humidity should be always maintained at 15ºC~35ºC and 35%~65%. It is best if the product is used within 12 months after production date. The fiberglass products should remain in their original packaging until just prior to user.
Automotive, vessels, gratings, bathtub, FRP composite, tanks, waterproof, reinforcement, insulation, spraying, spray gun, mat, gmt, boat, csm, frp, panel, car body, knitting, chopped strand, pipe, gypsum mold, boat hulls, wind energy, wind blades, fiberglass boat hulls, boats fiberglass, fiberglass pools, fiberglass fish tank, fiberglass fishing boat, fiberglass molds, fiberglass rods, fiberglass swimming pool, fiberglass boats molds, fiberglass pool, fiberglass chopper gun, fiberglass spray gun, fiberglass water tank, fiberglass pressure vessel, fiberglass poles, fiberglass fish pond, fiberglass resin, fiberglass car body, fiberglass panels, fiberglass ladder, fiberglass insulation, fiberglass dinghy, fiberglass car roof top tent, fiberglass statue, fiberglass grating, fiberglass rebar, glass fiber reinforced concrete, fiber glass swimming pool, etc.
FAQs
1. What is your terms of packing?
Generally, we pack our goods in carton with pallet
2. What is your tems of payment?
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
3. What is your terms of delivery?
EXW, FOB, CFR, CIF,L/C at sight
4. How about your delivery time?
Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
5. Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
6. What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Yes, we have 100% test before delivery
Contact us, we will use the professional knowledge serve you!
Wish we can create the great future together!
