Audited Supplier
| Product Description |
| 1. Main structure of the generator set Natural gas generator sets include natural gas-fueled reciprocating internal combustion engines, alternators, electrical parts, control devices, cooling systems, lubrication systems, exhaust systems, fuel systems, and auxiliary equipment. Except for the exhaust pipe and silencer of the exhaust system, they are mounted on a steel chassis. The generator set is a fixed permanent installed generator set. The steel underframe is mounted to the concrete foundation. 2. Main structure of the gas engine The engine's technology is from the German MAN and represents the most advanced engine in the world. It has undergone rigorous bench test, and its life is longer than other domestic engines. Its functional components and functional design make its components. The number is reduced by about 25% compared to conventional engines, and the maximum program reduces sealing components, greatly reducing the risk of "three leaks". The cylinder parts of the engine are made of vermicular graphite cast iron, which has high tensile strength and fatigue strength. Compared with the gray cast iron collective, the strength is increased by 75%. 3. Technical characteristics of gas engine Inherit advanced technology and excellent quality of German MAN's engine. And with below characteristics (1) Iridium spark plugs significantly the service life of spark plugs (2) EControls new generation of CFV gas supply system ensures the high reliability (3) Electronically controlled pressure regulating air inlet guarantees low gas consumption and low exhaust temperature (4) Wide domain oxygen sensor controls fuel-air ratio which ensures economic and environmental emission standard (5) All condition closed-loop control to achieve the optimal combustion. |
| Genset Specification | |
| Genset model | CM300S13N |
| Engine model | Sinotruk MT13 |
| Alternator model | Henjo or equivalent |
| Controller | Harsen |
| Rated power | 300kw |
| Rated voltage | 400V |
| Power factor | 0.8 (lagging) |
| Rated frequency | 50Hz |
| Rated speed | 1500rpm |
| Steady state voltage regulation rate | ≤±2.5% |
| Stabilization time | ≤1.5s |
| Transient state voltage regulation rate | ≤ ±20% |
| Fluctuation rate | ≤±0.5% |
| Steady state frequency regulation rate | ≤0-5% (adjustable) |
| Stabilization time | ≤5s |
| Transient state frequency regulation rate | ≤±10% |
| Fluctuation rate | ≤±0.5% |
| Starting method | 24V DC start |
| Voltage regulating method | AVR (Automatic voltage regulation) |
| Speed governing method | Electronic governor |
| Ignition system | Digital ignition system |
| Cooling mehtod | Forced water cooling with multi-fans radiator |
| Coupling method | Flexible coupling |
| Reference dimension | 3200x1300x1800mm (the drawing will be presented after signing of contract) |
| Reference weight | 3000kg |
| Natural Gas Engine Specification | |
| Model | Sinotruk MT13 |
| Engine type | Four strokes, spark plug ignited, water cooled, turbocharged and inter-cooled |
| Cylinder arrangement | 6 in line |
| Bore | 126mm |
| Stroke | 166mm |
| Displacement | 12.419L |
| Rated speed | 1500rpm |
| Idle speed | 800±50 |
| Compression ratio | 11.5:1 |
| Fuel gas consumption | ≤210g/kwh |
| Noise level | ≤97db@1meter |
| Exhaust gas temperature (after turbo) | ≤560ºC |
| Exhaust gas back pressure | 10-12kpa |
| Oil capacity | 40L |
| Oil consumption | ≤1.5g/kwh |
| Steady speed regulation | 0-5% adjustable |
| Cooling method | Forced water cooling, multi-fans radiator |
| Lubricating method | Pressure and splashing lubricating |
| Ignition method | Spark plug ignition |
| Starting method | 24V DC start |
| Rotating direction | Counterclockwise (flywheel view) |
| Output method | Flywheel output |
SHANDONG SHENGTANG Power Equipment Co., Ltd. is a company which focuses on the sales and upgrading of generator sets, including biogas generator sets, natural gas generator sets, diesel generator sets, etc.
Advantages:
We boast a highly skilled and experienced professional repair team capable of efficiently addressing various equipment issues while offering comprehensive diagnostic and repair services. Whether it's routine equipment maintenance or troubleshooting and repairing complex faults, our team leverages professional expertise and a meticulous approach to restore equipment to optimal operating conditions, minimizing downtime and ensuring maximum productivity for our clients.
Currently, our global service network covers multiple regions across Asia, Europe, and North America, ensuring prompt and efficient technical support for clients worldwide.
Q1: Do you offer guarantee for the products?
A: Yes, we offer 12 month years warranty to our products.
Q2. Is it OK to print my logo on diesel generator sets product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on .
Q3. How to proceed an order for diesel generator set?
A: Firstly let us know your requirements or application.
Secondly We provide solution according to your need.
Thirdly customer confirms the detail specs of the order, and arrange pay the deposit.
Fourthly We arrange the production after payment received.
Q4. How do you ship the goods and how long does it take to arrive?
A: Normally by sea shipping .Shipping time depends on distance.
Q5: How to deal with the faulty?
During the guarantee period, if some spare parts broken not from human behavior, we can send you related spare parts.or you can choose to order some parts together from generator sets. we can support online technique support all the time. if you have some technique problem on genset running, we can support professional technique staff go to your place to guide you work it out.
