Audited Supplier
Introduction
The main principle of the corrosion analysis instrument is:
six typical metals used in the engine cooling system are processed into test pieces, weighed, connected into test piece bundles, and then completely immersed in the specified samples. At the end of the test, take out the test piece, weigh it again after cleaning, and evaluate the corrosion according to the mass change value of the corrected test piece before and after the test.
This corrosion analysis instrument is applicable to engine coolant and its concentrate with high boiling point and low temperature, as well as engine cooling system rust inhibitor.
Characteristic
1.The pressure stabilizing valve controls the air inlet, and the flowmeter regulates the flow rate: 100ml / min ± 10ml / min;
2.Sputtering multi channel liquid circulator, which can ensure the temperature uniformity of each point;
3.Microcomputer temperature controller, digital display, accuracy ± 0.1 ºC, PT100 sensor;
4.Digital timer, recording the test time, with alarm;
5.Sand core glass gas diffusion head;
6.6 groups of metal test pieces is supplied with corrosion analysis, meeting the requirements of ASTM standards;
7.Safety protection device to prevent the liquid level from being too low;
8.The corrosion analysis has 3 working units, expandable to 4-6 units;
9.Quick disassembly device of condenser pipe;
Technical specifications
| 1 | Applicable standards | ASTM D1384, SH/T0085 |
| 2 | Heating mode | electric heating pipe |
| 3 | Temperature control mode | digital PID temperature controller |
| 4 | Pressure display | Pressure gauge |
| 5 | Working units | 3,can extend to 4-6 |
| 6 | Timing method | digital timer |
| 7 | Pressure control | pressure stabilizing valve |
| 8 | Refrigeration method | low temperature ciruclating water |
| 9 | Flow speed control | flowmeter |
| 10 | Total power | 2500W |
| 11 | Dimension | 690*410*760mm3 |
| 12 | Weight | 31KG |
| 13 | Power supply | AC220V 50HZ |
Customer Feedback
Chile
Germany
USA
Transporation
FAQ
1.What's the delivery time?About 25 working days.
2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.
3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support.
4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.
