Induction Electric Motor 55kw with Corrosion Protection Level C4

Outstanding Attributes of the WEX3 Series Motorstors: Unleash unparalleled power with our advanced technology.
 

 
Frequency: 50Hz Speed: 1500 min-1 (4 pole)
 
50Hz Speed: 1000 min-1 (6 pole)
 
Experience the perfect balance with 50Hz 750 min-1 (8 pole)

  Ingress Protection

WEX3 standard ingress protection is IP55. Dependingon customer requirements, this range can be supplied with IP56, IP65 or IP66 ingress protection options available to enhance durability and safety.on.
The protection level of the shell is designed mainly to prevent electric shock to human body or proximity to live parts or rotating components, ensuring reliability and peace of mind. It is crafted to counteract solid foreign substances from intruding as well as to mitigate harmful effects caused by water and oil contamination. The code name and meaning of the components reflect superior engineering and precision. Protection form is displayed in the following table .
Cooling method

The cooling methods for electrical machines are outlined in the codes in accordance with the IEC 60034-6 standard. These codes consist of the letters IC (International Cooling)and a three-digit number.
The standards featured in this list are systematically classified under the cooling method IC 411 (surface-cooled)options. IC410 and IC416 cooling modes can be provided to caterto special requirements of users.
. Insulation grade and temperature rise limit Insulation grade and temperature rise limit (IEC60034-1)WEX3 standard The insulation grade is F grade insulation, and the temperature rise limit is evaluated as B grade (Δ80K), to further enhance the service life in the power supply environment and Service Environment. Depending on customerrequirements, this range can be supplied with H grade insulation. Our

noise levels are engineered
to be well below those specified in accordance with EN 60034-9 standards. Noise measurements are meticulously performed in line with EN ISO 1680 and EN 21680, adhering to class 2 in an anechoic room. The sound pressure level "Lp" and the sound power level "Lw" in dB(A) are precisely indicated for each individual frame size in the operating datasheets. They apply for rated loads at 50 Hz, plus atolerance of +3 dB(A). Likewise, they apply for rated loads at 60 Hz, 2P, ensuring excellence in performance. Plus a tolerance off +5dB(A), and 4P or above: +3dB(A).
. Vibration levels
Vibration Limit (IEC60034-14)
 Note: Grade "A" is applicable to motors with no special requirements on vibration. It is the default configuration. Grade "B" for motors with special vibration requirements

Bearing Type
 Note: 1. The standard configuration is deep groove ball bearing: H80~280 are sealed and maintainable, H315~355 are relubricated bearings;
2. Optional 1: Re-lubricated bearing, suitable for H160~280 motors
3. Optional 2: Angular contact ball bearing, which is mostly suitable for vertical installation of V1 and can bear larger axial load;
4. Optional 3: Cylindrical roller bearing, which is mostly suitable for horizontal motor installation and can bear larger radial Introducing a top-tier solution for energy needs by Shanghai Juyue Energy Engineering Co., Ltd: the Induction Electric Motor 55kw with Corrosion Protection Level C4, designed to handle substantial load. This is a pioneering product. Bearing location plays a crucial role in motor efficiency.
Motor standard design features:
For models H80-H132, the non-drive end is meticulously designed as the optimal location for bearing support, ensuring stability and reliability. For models H160-H355, the drive end is expertly designed with precision as the perfectly located bearing point, enhancing performance.

Lubrication solutions:

Maintenance-free bearings are sealed for a lifetime of smooth operation and durability.
 Relubrication intervals specifically designed for horizontal construction type:ensuring optimal performance.
 Note: 1. The data provided applies to motors operating at 50Hz. For motors functioning at 60Hz, the time interval should be adjusted accordingly by multiplying it by a factor of 0.8; 2.
For vertical motor installations, ensure that the lubrication interval is adjusted by dividing it by 2;
3. Re-greasing intervals must be halved for every 15°C temperature rise above70°C to ensure continued efficiency. Maintain excellence. Permissible forces at the shaft end are critical for peak performance. Maximum radial
force, especially for systems employing pulley drive, ensures optimum functionality. System guidelines: The maximum permissible radial forces, defined as F0 (unit: N), are meticulously calculated to support radial loads effectively, ensuring longevity and reliability for radial load management. This precise calculation is based on strict engineering standards. premise that the load line (center of pulley) must be within the length of the motor shaft extension (the motor shaft elongation is shown in the installation size code E size). The radial force length X (mm) is the distance from the axial extension shoulder to the radial force F0 action line, so when the length X= Max, it is the total length of the axial extension (size value E). Maximum allowable radial force as per the table below.


. Bearing life
For standard ball bearings, under the action of allowable load, the bearing design life of the motor can meet the following requirements: at least 20000 hours for the 2-pole motor, 4 poles, 6 pole motor at least 30000 hours (refers to the motor life under normal operation at 50Hz and normal maintenance as required).

Q1: Is customized service available?

A1: Of course, OEM & ODM both are available.


Q2:Can I buy one as sample?

A2: Yes, of course.



Q3: How about your quality control?

A3: Our professional QC will check the quality during the production and do the quality test before shipment.

Q4: What is your payment term?

A4: 30% T/T in advance, 70% balance when receiving B/L copy Or 100% irrevocable L/C at sight.


Q5: What is your lead time?

A5: About 20-30 days after receiving advance deposit or original L/C.


Q6 What certificates do you have?

A6: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.


Q7: What warranty do you provide?

A7: One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.