Audited Supplier
ZD-G400
Yes
Yes
Metal
Metal-Cutting CNC Machine Tools, CNC Non-Conventional Machine Tools, Metal-Forming CNC Machine Tools, Automotive Components
Contour Control
Open-Loop Control
CNC/MNC
0.002mm-0.005mm
High-End CNC Machine Tools
GS, CE, ISO 9001
New
Dual Spindle Drilling and Milling Center
21 Pairs in Both Directions
System/Mitsubishi System
Dual Spindle Bt30 CNC Machine Tool with 20000rpm M
CNC Machine Tool with Imported Rolling Guide Rails
ZHIDECNC
Yes
2000*2000*1800
China Dalian
Product Description
,Introducing the ZD-G400, an intelligent dual-head CNC milling and drilling center, masterfully crafted with the strength of HT300 gray cast iron. This machine boasts a double spindle and dual tool magazine for exquisite precision cutting. Its seamless electromechanical integration gives it an aesthetically pleasing and graceful design. With just a single clamping, it effortlessly and continuously performs a range of processes including milling, drilling, boring, expanding, reaming, and tapping.
This versatile machine is ideally suited for the intricate and varied processing of medium and small-sized box, plate, and shell-type components.
The machine's bed body is engineered with a high rigidity classic C-type structure, rigorously optimized through finite element analysis and topology optimization. This design innovatively shortens the stress path to significantly enhance rigidity. Crafted entirely from HT300 cast iron and subjected to half-stress annealing and natural aging, it ensures superior durability. The P-level straight rolling rails along the X, Y, and Z axes provide unparalleled stiffness, stability, and reliability.
2,Spindle: The cutting-edge double spindle system features a BT30 internally housed spindle, reaching an impressive maximum speed of 20,000 RPM, ensuring top-tier performance.
3,Knife library: This robust machine highlights a double knife library system, utilizing an arm-type mechanism to guarantee dependable quality and consistent performance. With clip arm replacement, the tool magazine holds a capacity of 21 tools, enabling swift tool changes.
Drive: The integration of a direct connection drive with the three-axis motor and high-precision ball screw elevates transmission rigidity and positioning accuracy. With linear rolling guides across all three axes, the machine exhibits minimal vibration at high speeds and zero crawling at lower speeds.
,Equipment characteristics
- The dual-spindle drilling and tapping center effortlessly processes two identical parts simultaneously, doubling efficiency and productivity.
- Equipped with a single, user-friendly numerical control system, this machine handles two units with ease, optimizing operation while conserving energy.
- The innovative double Z-axis structure allows for automatic compensation of tool length across both spindles.
- The dual spindle configuration masterfully handles milling, drilling, boring, tapping, and more on two identical parts in one go.
- Standard high-speed dual spindle rotation speed: an impressive 20,000 rpm/min, setting industry standards.
- Featuring a dual knife library setup, this machine executes rapid and automatic tool changes with ease.
- With a high-power cooling pump, the machine guarantees ample and efficient cooling capabilities.
- A fully sealed protective cover ensures unmatched safety and maintains a clean and hygienic working environment for operators.
- Equipped with a scour device, this machine ensures effortless cleaning and cutting operations.
- The automatic centralized lubrication system promises prolonged durability and efficiency of the wire rod guide rail.
- Precision and reliability in positioning assure superior processing quality every time.
- The powerful chip removal system effectively prevents chip accumulation, thereby reducing manual cleaning efforts significantly.
- With an extraordinary movement speed of 60m/min, it dramatically shortens non-cutting time, boosting productivity.
- Providing high-speed, stable processing capabilities, this machine is an outstanding choice for bulk production.
,system
Equipped with the standard Mitsubishi M80 CNC system, this machine includes a specialized CNC CPU with exceptional high-speed processing capabilities.,Machine tool bed body and the main body structure
The foundation of the Intelligent Dual-Head CNC Milling and Drilling Machine Center is a marvel of engineering with its patented dual-head drilling structure. This design empowers the machine with dual mechanical spindles placed on either side, allowing for versatile single or synchronous dual processing. The column, crafted as an integrated double-head rail structure, and the core structure, made from robust grey cast iron, ensure exceptional rigidity and shock absorption. Reinforcements within the bed body, coupled with a thick structure, fortify its strength. The grey cast iron transverse sliding table and worktable add to the machine's stability and precision, thanks to a large span design. The column base is meticulously secured to the bed through scraping and grinding, and the 'meter' tendon reinforcement structure within the column enhances both stiffness and earthquake resistance. This precision-engineered design substantially boosts column rigidity and minimizes forward tilt from the spindle box. Moreover, the spindle box features high-strength cast iron, providing unparalleled stability.,Feed Mechanism
The X / Y / Z1 / Z2 axes are driven by a sophisticated feed mechanism that employs high-performance AC servo motors. These motors are ingeniously coupled with gap-less elastic couplings, which directly engage with the ball screws, ensuring seamless reciprocating motion across all axes. The wires are supported by a pre-stretched fixed structure at both ends, enhancing overall reliability and precision.
,Lead Rail
The guide rail system supporting the X / Y / Z1 / Z2 axes is a testament to cutting-edge technology, utilizing imported rolling guide rails. These rails provide tremendous rigidity and stability, endowing the machine tool with high precision and enduring accuracy.,Principal Axis
Boasting a dual spindle configuration, this machine tool integrates advanced spindle units capable of remarkable rotation speeds up to 20000 rpm, delivering a maximum torque of 21 Nm. The spindle's front end is equipped with an air seal, complemented by a standard BT 30 spindle handle and a set of ten pull nails, enhancing functionality and performance.The power and torque dynamics are depicted as follows:
,Lube Oil System
The entire machine's guide rails and wire bars benefit from a sophisticated quantitative pressurized concentrated dilute oil lubrication system. This system is capable of adjusting both the oil supply cycle and volume at each lubrication point. Through electrical system control, it achieves seamless automatic centralized lubrication.,Coolant Passage
An optional spindle cooling system complements the standard tool cooling system. A large-capacity water tank, featuring an immersion multi-stage stainless steel centrifugal pump, facilitates comprehensive cooling of both tools and workpieces. Additionally, it is equipped with a flexible nozzle system for enhanced cooling efficiency.,Chip Conveyor
A flush mechanism is strategically integrated into the machine, thoughtfully positioned on the sheet metal side to streamline chip management.,Knife Library System
Left Side Knife Library Form:
Featuring a 21-bit knife library (BT 30),
This system implements drilling and tapping within the knife library, facilitating effortless tool changeovers.
Right-Side Knife Library Form:
Equipped with a 21-bit knife library (BT 30),
This setup employs drilling and tapping for efficient tool change operations.
,Rotary Table
The machine offers the option of a 4-axis rotary table, allowing for unrestricted rotation. This functionality is ideal for multi-faceted processing, enabling precise angular adjustments for drilling, milling, boring, tapping, and other techniques. The configuration includes 4-axis linkage processing and a disc tail seat for enhanced operational flexibility.| specifications | unit | ZD-G400 | |
| staging | Working size | mm | 900*420 |
| T-type groove (number * groove width * spacing) | / | 3*18*134 | |
| Maximum load bearing | Kg | 300 | |
| route or distance of travel | X / Y / Z1 / Z2 axis stroke | mm | 450/400/300/300 |
| Distance from the spindle center to the pillar | mm | 440 | |
| Distance from spindle end face to workbench | mm | 175-475 | |
| Double spindle distance | Double-spindle relative distance | mm | 400 |
| Maximum size of parts | Part maximum size (length X width) | mm | 400* 400 |
| Spindle 1 | main shaft speed | rpm | 20000 |
| spindle taper | / | BT30 | |
| Spindle 2 | main shaft speed | rpm | 20000 |
| spindle taper | / | BT30 | |
| The spindle end jump radial jump | mm | 0.002 | |
| velocity | X / Y / Z1 / Z2 axis moves movement | m/min | 60/60/48 |
| accuracy | positioning accuracy | mm | 0.0 05 |
| Repeat positioning accuracy | mm | 0.00 3 | |
| Automatic knife changer system / ATC | Knife library capacity | T | 21 + 21 (double library) |
| Maximum tool diameter (full knife) | mm | φ80 | |
| Maximum tool diameter (adjacent air knife) | mm | φ140 | |
| Maximum tool weight | Kg | 3 | |
| Tool change time (T-T) Dual servo knife change system | s | 1. 2 | |
| system | system configuration | / | Mitsubishi |
| other | Power of spindle motor | Kw | 5.5 * 2 |
| X / Y / Z three-axis motor power | Kw | 1. 5/1. 5/3.0 | |
| power requirement | V | 380 | |
| Pressure required | Kg/cm² | 6 | |
| Machine tool weight | Kg | 45 00 | |
| Machine tool size (floor area) | mm | 1 90 0X2350 X2 5 80 | |
| Machine tool size (excluding water tank) | mm | 1 95 0X2 370X2 5 80 | |
,Primary Configuration List
| name | brand | specifications | Brand country |
| system | Mitsubishi | M80 | Japan |
| Feed servo motor | Mitsubishi | Mitsubishi HG Series | Japan |
| Spindle servo motor | Mitsubishi | Mitsubishi SJ Series | Japan |
| Diamond attack knife library | San Jie / north distance | 21T | Taiwan, China |
| lead screw | THK | 3216 (Grade C3) | Japan |
| lead rail | THK | 35 (Grade P2) | Japan |
| Three-axis bearing | NSK/FAG | P4 level | Japan / Germany |
| main shaft bearing | NSK/FAG | P4 level | Japan / Germany |
| principal axis | Luo Yi / Velon | BT30 | Taiwan, China |
| lube oil system | river valley | TZ-2232-210X-J | China |
| Electric cabinet heat exchanger | Love Pier | 15U-01-1227 | China |
| cooling water pump | Luo Rui | 400W/800W | China |
| Fully enclosed protective cover | Hua ya | totally enclosed type | China |
Note: The right to the final interpretation of the configuration, due to order cycles or other factors, is reserved by ZhNC.
