IP Unknown

MadeInChina.com > Metallurgy, Mineral & Energy > Aluminium Alloy > Aluminum Alloy Sheet

1060 3003 Aluminum Coil Cladding Jacketing Roll with Poly Craft Paper

Price	$2799.00 Compare
Min Order	1 Ton
Shipping From	Tianjin, China
Popularity	321 people viewed
Quantity	+-

Tianjin Ecoin Tech Co., Ltd

Audited Supplier 4 years

Profile Certified by SGS/BV

Tianjin, China
Amy (Ms.)

Visit Homepage Product Catalog

Product Detail

Model NO.:

1050/1060/1100/3003/5052

Width:

914mm, 1000mm, 1219mm

Polysurlyn Brand:

DuPont

Delivery Time:

22-30days

Pencil Hardness:

H14, H18, H24, T6

Kraft Paper Thickness:

0.14-0.16mm

Polysurlyn Thickness:

0.076mm(3 Mil)

Length:

30m, 50m, or as Requested

Moisture Barrier:

Polysurlyn, Craft Paper

Color:

Silver

Certification:

RoHS, ISO9001, ASTM, JIS, GB, EN

Technique:

Cold Drawn

Grade:

3000 Series

Temper:

O - H112

Surface Treatment:

Embossed

Alloy:

Alloy

Application:

Insulation Jacketing Cover

Trademark:

Ecoin

Transport Package:

Pallet Packing

Specification:

0.4-1.2mm

Origin:

Tianjin, China

HS Code:

7606125900

Product Description

There are 8 series of aluminum alloy, from 1xxx to 8xxxx. Most common used alloy for insulation is 1100, 1060, 3003, 3105 and 5005. 3003 is better in anti-rust performance than 1060.

Aluminum jacketing is available in Smooth, Stucco Embossed, Corrugated (cross-crimped) finishes, with or without moisture barrier (craft paper and polysurlyn)

Thickness (inch)	Thickness (mm)	Width (mm)	Length(m)	Suggested Application
0.016	0.4	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	OD below 36″(914mm) insulated lines
0.020	0.5	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	OD below 36″(914mm) insulated lines
0.024	0.6	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	OD 36″-8 (914mm-2.43m) insulated lines&equipment
0.032	0.8	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications
0.040	1.0	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	special applications where heavy mechanical is required
0.050	1.2	914, 1000, 1219	30, 60, 90, or big coil up to 2-3 tons	flat ducts or precipitators. Also recommended for areas subject to high wind conditions

Alloy	Si	Fe		Cu	Mn	Zn	Mg			Ti	Cr	Other Elements		Al
												Each	Total
1060	0.25	0.35		0.05	0.03	0.05	0.03			0.03	-	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20		0.05	0.10		-	-	-		0.05	0.15	99.0min
3003	0.6	0.7		0.05-0.20	1.0-1.50	0.10	-			-	-	0.05	0.15	reminder
3105	0.6	0.7		0.30	0.30-0.80	0.40	0.20-0.80			0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7		0.20	0.20	0.25	0.50-1.10			-	-	0.05	0.15	reminder

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA