Audited Supplier
YC388
Provied
One Year
CE
New
6-9t
Hydraulic - Mechanical
Front Discharge
Wheeled
Medium-sized Loader
2200mm
1.0m3
58kn
2500kg
2742mm
YUCHAI
Nude
6100*2365*3750
Guangxi, China
Product Description
Company Introduction
Founded in 1951, Guangxi Yuchai Machinery Group Co., Ltd. (Yuchai Group for short) is headquartered in Yulin, Guangxi Zhuang Autonomous Region. It is an investment and financing management company centered on capital operation and assets management. As a large-scale state-owned enterprise group, Yuchai Group has more than 30 wholly-owned, holding, and joint stock subsidiaries, with total assets of CNY 42.9 billion and approximately 16,000 employees. Yuchai Group is an internal combustion engine manufacturing base with a complete range of products in China. It has industrial base layout in Guangxi, Guangdong, Jiangsu, Anhui, Shandong, Hubei, Sichuan, Chongqing and Liaoning. Its annual sales volume is nearly CNY 50 billion and its sales volume of engines has ranked among the top in the industry for consecutive years.
Yuchai is on the list of the China's Top 500 Enterprises and China's Top 500 Manufacturing Enterprises. It ranks the 10th among the top 100 Enterprises in China's Machinery Industry, and the 99th among China's 500 Most Valuable Brands, with a brand value exceeding 63.825 billion Yuan. Honored with the "Autonomous Region Chairman Quality Award" and "China Quality Award Nomination Award", Yuchai is a national demonstration base for corporate culture construction and a national civilized unit, which has released corporate sustainable development reports for 13 consecutive years.
Guangxi Yuchai International Trade Co., Ltd. is a subsidiary company of Yuchai Group, which mainly engaged in the export of products of the Yuchai Group, including engines, generator sets, excavators,logging machines, light trucks and coaches (including traction, cargo), oil products, accessories and tires. The company also undertakes the overseas export business of whole vehicle products equipped with Yuchai engine, such as commercial vehicles, agricultural machinery, construction machinery and so on, to assists the whole vehicle manufacturers with overseas distribution channel development.
Yuchai is on the list of the China's Top 500 Enterprises and China's Top 500 Manufacturing Enterprises. It ranks the 10th among the top 100 Enterprises in China's Machinery Industry, and the 99th among China's 500 Most Valuable Brands, with a brand value exceeding 63.825 billion Yuan. Honored with the "Autonomous Region Chairman Quality Award" and "China Quality Award Nomination Award", Yuchai is a national demonstration base for corporate culture construction and a national civilized unit, which has released corporate sustainable development reports for 13 consecutive years.
Guangxi Yuchai International Trade Co., Ltd. is a subsidiary company of Yuchai Group, which mainly engaged in the export of products of the Yuchai Group, including engines, generator sets, excavators,logging machines, light trucks and coaches (including traction, cargo), oil products, accessories and tires. The company also undertakes the overseas export business of whole vehicle products equipped with Yuchai engine, such as commercial vehicles, agricultural machinery, construction machinery and so on, to assists the whole vehicle manufacturers with overseas distribution channel development.
| Overall Operating Weight | 8200KG | Final Reducer | Single Stage Final Reducer |
| Transport Dimension | Rated Loader of Axle | 8/18.5t | |
| ××mm L*W*H | 6100×2365×3752 | Transmission System | |
| Wheel base | 2200mm | Torque Converter | |
| Min. Ground Clearance | 300mm | Model | YJ280 |
| Bucket Capacity | 1.0m3 | Type | ,Single-stage Three Elements |
| Breakout Force | 58KN | Max. Efficiency | 84.40% |
| Loading Lifting Capacity | 2500KG | Inlet Pressure | 1.3-1.5Mpa |
| Bucket Dumping Height | 2742mm | Outlet Pressure | 0.25-0.3Mpa |
| Bucket Dumping Distance | 925mm | Cooling Method | Oil-cooling Pressure Circulation |
| Digging Depth | 52mm | Gearbox | |
| Backhoe Capacity | 0.3 m3 | Type | Fixed Shaft Power Transmission |
| Max. Digging Depth | 4082/4500mm | Oil Pressure of Clutch | 1373Kpa-1569 Kpa |
| Swing Angle of Excavator Grab | 190o | Gears | 4,4 Four forward, Four reverse gears |
| Max. Pulling Force | 65KN | Max.Speed | 35km/h |
| Engine | Tyre | ||
| Model | YC4A105Z-T20 | Model | 14-17.5/19.5L-24 |
| Type | ,,,In Line Direct injection Four-Stroke and Injection Combustion Chamber | Pressure of Front wheel | 0.55Mpa |
| -*Cylinder-Inside Diameter*Stroke | 4-108×132 | Pressure of Back Wheel | 0.223Mpa |
| Rated Power | 75KW | Brake System | |
| Rated Speed | 2200r/min | Service Brake | Air Over Oil Caliper Brake |
| Min. Fuel Consumption | ≤230g/km.h | External Type | |
| Max.Torque | ≥400N.M | Self-regulation | |
| Displacement | 4..837L | Self-balance | |
| Steering System | /Emergency Brake | Operation Power Implementing brake | |
| Model of Steering Device | BZZ5-250 | Manual Operation Power Terminating Brake | |
| Steering Angle | ±36 o | Hydraulic System | |
| Min. turning radius | 6581mm | Digging Power of Excavator Grab | 60KN |
| Pressure of the system | 12Mpa | Digging Power of Dipper | 44KN |
| Axle | Bucket Lifting Time | 6.8S | |
| Manufacturer | :Feicheng Axle Factory | Bucket Lowering Time | 3.1S |
| :Feicheng Axle Factory | |||
| Main Transmission Type | Double Reduction | Bucket Discharge Time | 2.0S |
YUCHAI small and mini-wheel loader is a customized, efficient, energy-saving, comfortable and versatile compact wheel loader. It is mainly used for short-distance shovel loading and transfer of loose soil, sand, coal, garbage, and other small bulk materials. It is widely used in farm, ranch, construction and other places.
Reliability
It is equipped with a well-known brand engine special for construction machinery, which also has large torque reserve and strong power.
The dual high-low speed reinforced transmission is made of high quality gears, bearings, oil seals and other key components, equipped with the transmission oil filter , making the transmission have longer service life
The hydraulic system is designed according to heavy-duty loader standard. The pipes and fittings are all applied with 24° cone sealing to avoid oil leakage effectively. Sucking and returning oil circuit of hydraulic oil tank adopts dual filter, which makes the system cleaner , and the service life of hydraulic components is tripe longer than the industry average level .
Electronic-controlled china tier 3 engine, the specific power -matching technology with P.E.S (heavy-load, medium-load, light load) power control mode, which can be reasonably selected according to the operating conditions. Not only ensure the machine dynamic performance, but also reduce the energy consumption and improve the productivity
The heavy-duty front and rear frames use high-strength steel plates, which applies with CAE finite element analysis technology. The structure is reasonable, with strong bearing capacity and high reliability.
The engine air-intake three-stage filtration system effectively reduces the early wearing of the engine
It is equipped with casting reinforced drive axle. It is equipped with large modulus spiral bevel gear and planetary gear. The main drive and hub reduction use dual seals which have good sealing effect, strong, bearing capacity and high reliability
The work device has a large bucket withdraw-back angel and good translational movement performance. It uses durable bimetal sleeve and high frequency quench pin shaft, which service life is double longer than the industry average level.
High efficiency
It is applied with the patented heavy-loader matching technology.
Heaving energy-saving and high-efficiency
Optimum design of work device
Reasonable matching of hydraulic system Short total time
High work efficiency
The dual high-low speed reinforced transmission has great traction and strong power output high travel speed is suitable for long-distance transfer operations.
The bucket I designed according to large-size wheel loader's concept, which has small insertion resistance, and high full-load rate.
Comfort
New appearance cab has large-size loader style. The dimension is increased and the operation space is large. Dual curved front glass gives you wide vision. No threshold design, equipped with luxurious mechanical suspension seat and comfortable ride.
Three-stage vibration reduction in engine transmission and cab
Low vibration, low noise, and more comfortable
Digital stepping instrument panel and CAN data bus communication technology. High definition, complete functions, good human-machine interaction
Newly-designed engine hood with beautiful appearance, frame structure, stable and reliable. Large opening door structure with wide maintenance space
Optional air conditioner and heater, providing drivers with a comfortable operating environment
Questions and Answer
1. Are you the original manufacturer?
Yes, we are a manufacturer of Chinese construction machinery. We have the full range of products you need, including engines, excavators, forest harvesters, skidders, rotary drills and all kinds of attachments.
2. What kind of payment terms can you accept?
T/T, L/C
3. Which INCOterms can you use?
Usually we use FOB, CFR, CIF, FCA, CIP, CPT.
4. What is the delivery time?
The prepayment is 30% of the total price. Generally, We usually deliver the products within 30 days after receiving the prepayment. If there is inventory, it will be shipped earlier. If there is no inventory, it is necessary to arrange the production. Please consult customer service for specific delivery times.
5. What's the minimum order quantity?
The minimum order quantity is 1 set.
6. The warranty of the machine and how will you carry out the service?
A: Warranty period: 1 years. During warranty, the warranty period of the replacement parts or assemblies shall be accumulated on the date original parts or assemblies have been used.
7. What is the delivery method?
(1) Land transportation, railway transportation.
(2) Shipping. The products will be shipped to their destination from Guangzhou Port, Qinzhou Port or Shenzhen Port.
8. Can you put the customer's brand on the product?
Yes. We provide customized service. We can manufacture machinery products according to the requirements of the customers and then affixed to the customer-specified brand.
9. How to supply spare parts?
We recommend a 2 year spare parts list, you can choose and order some spare parts.
Yes, we are a manufacturer of Chinese construction machinery. We have the full range of products you need, including engines, excavators, forest harvesters, skidders, rotary drills and all kinds of attachments.
2. What kind of payment terms can you accept?
T/T, L/C
3. Which INCOterms can you use?
Usually we use FOB, CFR, CIF, FCA, CIP, CPT.
4. What is the delivery time?
The prepayment is 30% of the total price. Generally, We usually deliver the products within 30 days after receiving the prepayment. If there is inventory, it will be shipped earlier. If there is no inventory, it is necessary to arrange the production. Please consult customer service for specific delivery times.
5. What's the minimum order quantity?
The minimum order quantity is 1 set.
6. The warranty of the machine and how will you carry out the service?
A: Warranty period: 1 years. During warranty, the warranty period of the replacement parts or assemblies shall be accumulated on the date original parts or assemblies have been used.
7. What is the delivery method?
(1) Land transportation, railway transportation.
(2) Shipping. The products will be shipped to their destination from Guangzhou Port, Qinzhou Port or Shenzhen Port.
8. Can you put the customer's brand on the product?
Yes. We provide customized service. We can manufacture machinery products according to the requirements of the customers and then affixed to the customer-specified brand.
9. How to supply spare parts?
We recommend a 2 year spare parts list, you can choose and order some spare parts.
