Audited Supplier
3/4" 16 Bwg 20FT
Seamless Pipe, Stainless Steel Pipes
ASTM, AISI, GB, EN, GOST 9941-81
300 Series
ISO
Round
Cold-Drawing
AP/BA/Polishing/Sand Blasting/Shot Blasting
304 Stainless Steel
1/8inch-24inch
Sch10s~Sch160
Random Length or Fixed Length
HT/ET/UT
Stock 7 Days; MTO30 Days
EXW, FCA, FOB, CFR, CIF etc.
According to A999/A999m
GH-STEEL
Packed in Bundles or Plywooden Box
3/4" 16 BWG 20FT
China
7304419000
Product Description
| Product Name | Stainless Steel Seamless Pipes /Tubes Труба Сталь конструкционная криогенная Tubería de acero inoxidable sin costura Tubos de Aço Inoxidável sem Costura Tubo INOXIDABLE SIN COSTURA | |
| Company Inform | 1.Name:WENZHOU GUOHAO STEEL., LTD 2.Type: Manufacturer | |
| Material | Austenitic: TP304, TP304L, TP304H | |
| Standard | ASTM A312,ASTM A213,ASTM A269 | |
Specification | D(Outer Diameter) | 6mm-630mm ; 1/8inch-24inch |
| T(Wall Thickness) | 0.89mm-40mm SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, SCH XXS 10 BWG, 12 BWG, 14 BWG , 16 BWG, 18 BWG, 20 BWG 10 SWG, 12 SWG, 14 SWG , 16 SWG, 18 SWG, 20 SWG | |
| L(Length) | Random length 5~7m Fixed length 6m /6.096m /6.1m/12m or as customer's actual request | |
| Surface |
| |
| Pipe End |
| |
| Markings | GH-STEEL S.S SMLS TUBE ASTM A269 TP304L 3/4" 16 BWG HEAT NO.*********** Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydrotesting is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer's private identifying mark, the marking requirement of section 12.3 on Hydrostatic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification. | |
| Flattening Test | For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 lengths of pipe. | |
| Hydrostatic or Nondestructive Testing | Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test | |
| Value Added Services | Customize Length, Bending, Polishing, Shot Blasting, Drilling/Punching, Degreasing | |
| Delivery Time |
| |
| Trade Terms | EXW,FOB, CFR, CIF etc. | |
| Loading Port | Ningbo/Wenzhou/Shanghai | |
| Remittance method | TT/LC/CASH | |
| Container | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM | |
| Referenced Documents | ASTM Referenced Standards A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A370 Test Methods and Definitions for Mechanical Testing of Steel Products A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements for Alloy and Stainless-Steel Pipes A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless-Steel Tubes E112 Test Methods for Determining Average Grain Size E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) | |
Euivalent Grades of SS 304 / 304L / 304H Stainless Steel Seamless Tubes Pipes
| STANDARD | WERKSTOFF NR. | UNS | JIS | AFNOR | BS | GOST | EN |
|---|---|---|---|---|---|---|---|
| SS 304 | 1.4301 | S30400 | SUS 304 | Z7CN18‐09 | 304S31 | 08Х18Н10 | X5CrNi18-10 |
| SS 304L | 1.4306/1.4307 | S30403 | SUS 304L | Z3CN18‐10 | 304S11 | 03Х18Н11 | X2CrNi18-9 / X2CrNi19-11 |
| SS 304H | 1.4301 | S30409 | - | - | - | - | - |
| Grade | Ni | Mn | P | C | S | Si | Cr | N | |
| 304 | min. | 8.0 | - | - | - | - | - | 18.0 | - |
| max. | 10.5 | 2.0 | 0.045 | 0.08 | 0.030 | 0.75 | 20.0 | ||
| 304L | min. | 8.0 | - | - | - | - | - | 18.0 | - |
| max. | 12.0 | 2.0 | 0.045 | 0.030 | 0.030 | 0.75 | 20.0 | 0.10 | |
| 304H | min. | 8.0 | - | - | 0.04 | - | - | 18.0 | - |
| max. | 10.5 | 2.0 | 0.045 | 0.10 | 0.030 | 0.75 | 20.0 | ||
| Grade | Tensile Strength (MPa) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (MPa) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 304 | 515 | 40 | 205 | 92 | 201 |
| 304L | 485 | 40 | 170 | 92 | 201 |
| 304H | 515 | 40 | 205 | 92 | 201 |
| Grade | Density (kg/m3) | Specific Heat 0-1000C (J/kg.K) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Electrical Resistivity (n.m) | |||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
| 304 | 8000 | 500 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 720 |
| 304L | 8000 | 500 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 720 |
| 304H | 8000 | 500 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 720 |
| Outside Diameter | BWG | ||||||||
| 25 | 22 | 20 | 18 | 16 | 14 | 12 | 10 | ||
| Wall Thickness mm | |||||||||
| 0.508 | 0.71 | 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.40 | ||
| mm | inch | Weight kg/m | |||||||
| 6.35 | 1/4 | 0.081 | 0.109 | 0.133 | 0.174 | 0.212 | |||
| 9.53 | 3/8 | 0.126 | 0.157 | 0.193 | 0.257 | 0.356 | 0.429 | ||
| 12.7 | 1/2 | 0.214 | 0.263 | 0.356 | 0.457 | 0.612 | 0.754 | ||
| 15.88 | 5/8 | 0.271 | 0.334 | 0.455 | 0.588 | 0.796 | 0.995 | ||
| 19.05 | 3/4 | 0.327 | 0.405 | 0.553 | 0.729 | 0.895 | 1.236 | ||
| 25.4 | 1 | 0.44 | 0.546 | 0.75 | 0.981 | 1.234 | 1.574 | 2.05 | |
| 31.75 | 1 1/4 | 0.554 | 0.688 | 0.947 | 1.244 | 1.574 | 2.014 | 2.641 | |
| 38.1 | 1 1/2 | 0.667 | 0.832 | 1.144 | 1.514 | 1.904 | 2.454 | 3.233 | |
| 44.5 | 1 3/4 | 1.342 | 1.774 | 2.244 | 2.894 | 3.5 | |||
| 50.8 | 2 | 1.549 | 2.034 | 2.574 | 3.334 | 4.03 | |||
| 63.5 | 2 1/2 | 1.949 | 2.554 | 3.244 | 4.214 | 5.13 | |||
| 76.2 | 3 | 2.345 | 3.084 | 3.914 | 5.094 | 6.19 | |||
| 88.9 | 3 1/2 | 2.729 | 3.609 | 4.584 | 5.974 | 7.27 | |||
| 101.6 | 4 | 4.134 | 5.254 | 6.854 | 8.35 | ||||
| 114.3 | 4 1/2 | 4.654 | 5.924 | 7.734 | 9.43 | ||||
| Stainless Steel Tube: A/SA213, A/SA269, A/SA789, EN10216-5, GOST9941-81. | |||||||||
| Standard | Outside Diameter Tolerance(mm) | Thickness Tolerance(mm) | Length Tolerance (mm) | |||
| ASTM A269 | D<12.7 | ±0.13 | ±15% | +3.2 / -0 | ||
| (12.7~38.1] | ±0.13 | ±10% | ||||
| [38.1~88.9) | ±0.25 | +4.8 / -0 | ||||
| [88.9~139.7) | ±0.38 | |||||
| [139.7~203.2) | ±0.76 | |||||
| ASTM A213 | D<25.4 | ±0.1 | D≤38.1 | +20%/ -0% | D≤50.80 | +3 / -0 |
| [25.4~38.1] | ±0.15 | |||||
| (38.1~50.8) | ±0.2 | D>38.1 | +22%/ -0% | D>50.8 | +5 / -0 | |
| [50.8~63.5) | ±0.25 | |||||
| [63.5~76.2) | ±0.30 | |||||
| [76.2~101.6] | ±0.38 | |||||
| (101.6~190.5] | +0.38 / -0.64 | |||||
| (190.5~228.6] | +0.38 / -1.14 | |||||
| ASTM A312 | [10.29~48.26] | +0.4 / -0.8 | 10.3~73 | +20% / -12.5% | +6 / -0 | |
| 88.9~457 T/D≤5% | +22.5% / -12.5% | |||||
| (48.26~114.30] | ±0.80 | 88.9~457 T/D>5% | +15% / -12.5% | |||
| (114.30~219.08] | +1.6 / -0.8 | 508above T/D<5% | +22.5% /-12.5% | |||
| (219.08~457.20] | +2.4 / -0.8 | 508above T/D>5% | +15%/-12.5% | |||
| ASTM A789 | D<12.7 | ±0.13 | ±15% | +3 / -0 | ||
| [12.7 to 38.1) | ±0.13 | ±10% | ||||
| [38.1 to 88.9) | ±0.25 | +5 / -0 | ||||
| [88.9 to 139.7) | ±0.38 | |||||
| [139.7 to 203.2) | ±0.76 | |||||
| ГОСТ 9941-81 | [5~10] | Normal:±0.30 High:±0.20 Higher:±0.15 | T:0.2 | Normal:±0.05; High:±0.03 | / | |
| T:0.3~0.4 | Normal:±0.07; High:±0.05 | |||||
| T:0.5~1.0 | Normal:±0.15; High:±0.10 | |||||
| [11~30] | Normal:±0.40 High:±0.30 Higher:±0.20 | T:1.2~3.0 | Normal:+12.5% / -15%; High:±12.5%; Higher:+12.5% / -10% | |||
| T:3.5~7.0 | Normal:±12.5%; High:+12.5% / -10%; Higher:±10% | |||||
| [32~95] | Normal:±1.2% High:±1% Higher:±0.8% | T:7.5~8.5 | Normal:+12.5% / -10%; Higher:±10% | |||
| EN10216-5 | D3 | ±0.75% / ±0.30mm | T3 | ±10%/ ±0.20mm | L≤6m | +5 +0 |
| D4 | ±0.5% / ±0.10mm | T4 | ±7.5% / ±0.15mm | ≥6~12M | +10-0 | |
- All of our stainless steel seamless pipe & tubes are packaged as per international standard to prevent any possible damage or loss. By default, we will use thick woven plastic bag to bundle the finished pipes together in batches.
- For some special pipes & tubes that are vulnerable to dirt, scratches, stress or rough handling, we will suggest wooden case for protection. Kindly note, wooden case can incur extra cost, not only its own cost, but also the increased freight cost, which is especially true for air transportation.
- For enhanced customer experience, we also provide dedicated package as per your special requirements.
We provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, HT/DNT Test Report, Third Party Inspection Report.
• EN 10204/3.1B
• Raw Materials Certificate
• HT/NDT Test Report
• Third Party Inspection Report
Material Testing: We ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing
• Hardness Test
• Chemical Analysis - Spectro Analysis
• Positive Material Identification - PMI Testing
• Flattening Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
- 1. General service
- 2. Curatorial Industry
- 3. Food Industry
- 4. Ornamental
- 5. Aerospace Industry
- 6. Petrochemical
- 7. Fluid transport
- 8. Nuclear Industry
- 9. Boiler heat- exchanger
- 10. Oil and gas service
Guohao Steel adhere to the high standards of integrity and compliance required, including:
- Environmental standards
- Health and safety standards
- Ethical trading standards
- Export compliance requirements
In order to achieve our goals, we are improving our facilities and expanding our machinery to offer broader processing capabilities. Additionally, our investment extends to the growth and development of our teams, which represent our most valuable resource. We aim for our customers to receive the best experience and trust in the expertise, knowledge, and experience of our teams. As we continue looking towards the future, we rely on our core values to guide both decisions and actions.
- More than 16 Years of Experience in Stainless Steel Production.
- Provides cost-effective products and professional services to you.
- We offer an extensive range of stainless steel, super duplex steel,nickel alloy.
1.Q: Do you provide customized product services?
A: Of course, we can design and produce the products you need based on your specifications and drawings. For example: special dimensions, special controls, OEM, etc.
2.Q: Are you a manufacturer or trader?
A: We are manufacturers. We have our own factory to produce and process various kinds of stainless steel /nickel alloy pipes.
3.Q: Can we get the some samples?Is there a charge?
A: Yes, we will provide you with the samples you want. The samples are free of charge, but the customer may have to pay the freight.
4.Q: Can we visit your factory?
A: Of course, we welcome you to visit our factory on-site or visit our production line through online videos to learn more about our strength and quality. Once we have your schedule, we will arrange a professional sales team to follow up with you.
5.Q: How do you ensure the quality of the product?
A: All products must undergo three inspections throughout the entire manufacturing process, including production, cutting, and packaging. The factory inspection report is provided with the goods. If necessary, third-party inspections such as SGS can be accepted.
6.Q: What is your delivery time?
A: Different products and procurement quantities have different delivery times. The product will be delivered as soon as possible on the basis of quality assurance. Usually, if the goods are in stock, it takes 3-10 days. Alternatively, if the goods are out of stock, it will take 25 to 45 days.
7.Q: Can you arrange shipment?
A: Of course, we have freight forwarders who have been cooperating for many years. We are VIP and can provide you with the most favorable prices and professional services.
8.Q: What if I don't have import experience?
A: We have rich export experience. As long as you have an import license, please leave the rest to us! We will help you choose the most suitable transportation service to safely and accurately deliver the product to the place where it is needed.
