Audited Supplier
TK-106*3.56
1 Year After The Final Acceptance
Tunnel Kiln
Firing Machine
ISO9001:2015
Automatic
Customized
PLC
Drying Kiln
Zhongya kiln
Pallet, Naked Packed, Package,
106*3.56*0.92M
China
8417809090
Product Description
This equipment is a lightweight energy-saving tunnel kiln composed of 95 kiln cars and 53 kiln body modules, with a fully automatic kiln car operation system and control system. The installation concept of modern design and construction provides convenient operation while bringing higher benefits to customers.
Main Feature:
-Low thermal reserved material , mix structure of heavy brick and light weighted refractory brick used in kiln labyrinth.
-The brick of kiln car is hollow block of Cordierite, strong and firm, interlock-seal between kiln car and the labyrinth is adopted double sealing.
-The burners of middle pressure and high spray velocity is interlaced installed on kiln wall.
-Use the ratio of air/gas firing control system to adjust kiln temperature automatically.
-Advanced computer and PLC centralized control system to monitor kiln running.
-The fans are platform mounted and controlled by the inverter.
-One button to start up the kiln, checking and running automatically.
| Specification | Index | Remark |
| Products | Sanitary ware | First firing, re-firing |
| Production capacity | 430000 Pieces/Year | According to Party A's product |
| Useful length | 106M | |
| Useful width | 3.3M | |
| Useful height | 0.92M | According to Party A's product |
| Useful loading of kiln car | 1.65×3.3×0.92 | L×W×H |
| Pass rate | 95% | |
| Operation temperature | 1230ºC | Normal peak temperature |
| Max. temperature | 1280ºC | |
| Total number of kiln cars | 95PC | 62 kiln cars in the kiln |
| Firing cycle | 14-36H | Calculated based on 16 hours |
| Firing Atmosphere | Oxidation | |
| Firing control mode | Flow and ratio control mode | |
| Energy consumption | 750±5%Kcal/Kg | Firing temperature ≤1200ºC , full load production |
| Drying kiln | 30M | 17 kiln cars in the kiln |
Equipment body
1. Mature energy-saving firing technology
2. Design and the selection of materials are advanced and reasonable
3. Low gas consumption
4. Low temperature on kiln outside surface and under the cars
5. Small temperature difference in kiln cross-section
6. High qualified rate of sintering
7. Fully automatic control, safe and reliable operation.
1. Mature energy-saving firing technology
2. Design and the selection of materials are advanced and reasonable
3. Low gas consumption
4. Low temperature on kiln outside surface and under the cars
5. Small temperature difference in kiln cross-section
6. High qualified rate of sintering
7. Fully automatic control, safe and reliable operation.
Control system
1. Kiln control system is developed independently by us, which is suitable for air/gas ratio control,pulse control and flow control according to different requirements of the production processing.
2. Kiln control system mainly select Siemens PLC module of S7-300 and S7-200 or OMRON PLC module of CJ2M, industrial control computer and touch screen.
3.This system can collect the signals of kiln temperature, the pressure, air flow, etc., then send these information to main control panel or management system to display, record, set and control.
4.Control system can record and mange klin data in Microsoft windows, you can easily inquire historial data for defect analysis.
1. Kiln control system is developed independently by us, which is suitable for air/gas ratio control,pulse control and flow control according to different requirements of the production processing.
2. Kiln control system mainly select Siemens PLC module of S7-300 and S7-200 or OMRON PLC module of CJ2M, industrial control computer and touch screen.
3.This system can collect the signals of kiln temperature, the pressure, air flow, etc., then send these information to main control panel or management system to display, record, set and control.
4.Control system can record and mange klin data in Microsoft windows, you can easily inquire historial data for defect analysis.
Pre-Sales service:
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication
After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.
-Visit the factory, understand the demands and site measurement
-Issue a preliminary proposal, technology discussion
-Details' confirmation, organize the offer
-Sign the contract, kiln design and fabrication
After-sales service:
-Kiln installation and commissioning
-Operation and maintenance training
-Provision of detailed operation and maintenance manuals along with troubleshooting guides.
-Supply of spare parts for future maintenance needs.
-Detailed information on vulnerable materials for easy reference.
-Prompt technicial support and assistance by phone, video, email or solve at site if need.
