Audited Supplier
ccam
Local Communication Cable, Coaxial Cable, LAN Cable, Long Distance Symmetric Cable, RF Cable, Submarine Cable
BC/CCS/CCA/TC/CU/CCAG
Non
Cat 1
Round Wire
Solid
CCA
CE, ISO, RoHS
Coaxial
Fuu
FUU
Carton
305m/roll
Made in China
8544200000
Product Description
0.12-3mm Copper Clad Aluminum Magnesium Wire/ CCAM wire
Copper clad aluminum wire is produced with the production process of cladding-welding- drawing method, by cladding planished copper stripe concentrically on the outer surface of the aluminium core, via several times of drawing and heat treatment, to meet customers' technical requirement on line diameter, mechanical property and electrical property. The copper clad aluminum wire characterizes by both the samll density of aluminum and the good conductivity of copper.Name
Spec. |
Diameter
| Copper In volume | Copper In mass | Conductivity | Tensile Strength | Elongation | Density |
CCAM-D
| 0.12 -3.00mm | Cu < 10 | Cu < 26.8
| ± 37% | ± 220 Mpa | ≥ 8 % |
2.9 -- 3.0 g/cm3
|
CCAM-10 | 0.12-3.00mm | Cu-10 % | Cu 26.8-30%
| 55% - 57% | ± 180 Mpa | ≥ 10 % | 3.62- 3.7 g/cm3
|
CCAM-15 | 0.12 -3.00mm | Cu-15% | Cu 37-40%
| 57% ---59% | ± 190 Mpa | ≥ 10 % | 3.72- 3.8 g/cm3
|
Copper coated aluminum wire / cca wire
The CCA wire is made up by using pure aluminum wire as core. It adopts the advanced coating and welding technology in the world. Plating copper concentrically on the concentric line of aluminum, realizes metallurgy combination between copper coating and aluminum. Threr will be no falking off during the heat treatment or mechanical workout. the CCA is a best new bimetal wire instead of pure copper wire. Producible scope:t the diameter is from Φ01.0mm to Φ3.00mm.
Product Fearures: shiny & uniformity unlform copper layer, excellent electrical conductivity, bear bending, good tensile strength, excellent welding and corrosion, with the great light specific gravity, and savings resources of copper.
Main Application: flexible coaxial cable, a variety of audio and video cable,vehicle single cable, network cable,data transmission cables and so on. Can be used in the above cables: cable conductor, braiding and shielding, the single wire conductor and other conductors.
| Construction Parameters: | ||
| Nomial diameter Φ /mm | 0.2mm | |
| Diameter difference ±mm | ±0.004mm | |
| Copper content % | 27 % | |
| Density (20 ºC) g/cm3 | 3.3 g/cm3 | |
| Intensity test of the soft state ≥N | ≥3.7 N | |
| Tensile strength of soft-state≥N/mm2 | ≥120 N/mm2 | |
| Hard measured intensity ≥N | ≥8.4 N | |
| Tensile strength of hard-state≥N/mm2 | ≥270 N/mm2 | |
| Electrical Characteristics: | ||
| Resistivity (20ºC) ≤Ω.km/mm2 | ≤27.5 Ω.km/mm2 | |
| Measured resistance (20 ºC) ≤Ω/km | ≤875Ω/km | |
| Conductivity (20 ºC) ≥% | ≥63 % | |
| Soft-state elongstion≥% | ≥10 % | |
| Hard elongation≥% | ≥12 % | |
| Product Inspection: | ||
| Inspection Item | Standard Requirement (ASTM B 566-93) | Inspection Result |
| 1. Surface | Bright, Clean, no flaw | OK |
| 2. Diameter (mm) | 0.2(+/-0.004mm) | OK |
| 3. Tensile Strength (N/mm2) | ≥120 N/mm2 | OK |
| 4. Elongation (%) | ≥10 % | OK |
| 5. Density (g/cm3) | 3.3 (±0.03)g/cm3 | OK |
| 6. Resistivity (20ºC) ≤Ω.km/mm2 | ≤27.5 Ω.km/mm2 | OK |
| 7. Conductivity (%IACS) | ≥63 % | OK |
| Conclusion | Pass | |
| Order Informations: | ||
| Technical Parameter | based on customer's requirements | |
| Package | Please advise the spool size or your special requirements | |
| Delivery time | Normally 20-25 days after received the deposit. | |
| Application | braid shielding & cable conductor (single or stranded) for coaxial cable, power cable, signal cable, network cable, data cable, enameled wire etc | |
| More informations | please contact with us. | |
CCA WIRE
[Copper clad aluminum wire]
Diameter specification: 0.12 mm - 8.00 mm
CCA wires are divided into hard drawn (H) and annealed (A). According to process, it can be divided into clad CCA wire and plated CCA wire.
Advantages:
Under the same weight and diameter, the length of CCA wire is 2.6-3.2 times that of copper wire.
According to pure copper wire, it is impossible to separate copper from CCA wire to keep thieves away.
CCA wire is more ductile than copper wire. Unlike aluminum, aluminum produces insulating oxides, is easier to process, and has good electrical conductivity.
4. CCA wire is light in weight, easy to transport and install, reducing labor costs.
CCA welding wire has significant social benefits and can save a large amount of copper raw material resources.
Application:
CCA lines are widely used for the transmission of cable TV signals and large-capacity communication network signals, control signal lines, welding lines, etc.
High frequency signal transmission:
1. Select the conductor material of the cable TV coaxial cable;
2.50 Ω radio frequency (RF) cable;
3. Flexible RF coaxial cable inner conductor material;
4. Inner conductor materials of computer cables and other data cables;
5. Inner conductor material of ultra-fine coaxial cable;
Power transmission:
1. Select the conductor material of the enameled wire;
2. Power cable conductor material;
3. Control cable conductor material;
4. Inner conductor of automobile and locomotive cables;
5. Building cable conductor materials;
6. Bus conductor material;
7. Fuse;
8. RF shielded cable network;
Special electromagnetic wire:
1. Select computer conductor materials;
2. Mobile communication line;
3. Coil or cylinder used in aerospace or military equipment;
Ordinary packaging:
Dimensions of spool: DIN 130, DIN 160, DIN 185, DIN 200, DIN250, DIN 400, DIN 500, DIN630, DIN 780;
COPPER WIRE | CCAM WIRE | ALUMINUM WIRE | |
Copper Percent in Volume(%) | 100 | 15 | 0 |
Density(g/cm3) | 8.89 | 3.50 | 2.70 |
Length Comparison based on same Diameter and same weight | 1:1 | 2.5:1 | 3.29:1 |
Resistivity(ohm.mm2/m) | 0.01724 | 0.035 | 0.02740 |
Tensile strength(Mpa) | 215-265 | ≥160 | 68-107 |
Elongation(%) | ≥20 | ≥10 | ≥15 |
Why choose us:
1) We are a professional direct cables manufacturer more than 10 years located in Lin'an,Hangzhou. Can provide you high quality cables with best factory price.
2) Our products are saleable in all over the world, and have been exported to many countries.
3) Delivery in time: We have more than 100 experienced worker, can delivery in time with good quality.
4) We have the strict quality control system. All the products are checked before delivery.
5) Reliable Service: All the inquiry and questions would be replied within 24 hours.
1) We are a professional direct cables manufacturer more than 10 years located in Lin'an,Hangzhou. Can provide you high quality cables with best factory price.
2) Our products are saleable in all over the world, and have been exported to many countries.
3) Delivery in time: We have more than 100 experienced worker, can delivery in time with good quality.
4) We have the strict quality control system. All the products are checked before delivery.
5) Reliable Service: All the inquiry and questions would be replied within 24 hours.
F6SSEF/F6SSV/F6SSVM/F6SSVR/F6TSV/F6TSVR/F6TSVV 830BM/F660BEF/F660BEM/F660BVR/F660BVV/F677TSEF/F677TSVR/F660BV-APD/F660BVM/F690BEF/F690BVV-APD/F690BVM
Factory photos and production process
Our Service:
1) Quick Response --All inquiries will be replied within 24 hours.
2) Professional Quotation --All prices will be quote according to customers' detailed
specifications & requirements.
3) OEM & ODM Service
4) Can print your own brand on the jacket printing with foot or meter marking.
5) Make customized designs for stickers, drums, outer cartons, etc.
6) Stable Quality --All materials and products passed restrict QC procedures,comply with
international standards.
7) Fast Delivery --LCL orders,15days after confirmation; FCL orders, 20 days after
Confirmation in usual.
Good After-sales Service
--We chose the fastest vessel to POD for delivery our goods to clients,
--All Documents will be issued according to clients' instructions, to save troubles from local customs.
--Any complaint to quality or packing issued will be responded, and terminated with proper solutions for clients.
FAQ:
Q1: What kind of cable do you produce?
A: We specialized in producing Coaxial Cable,Network Cable,Patch Cord,CCTV Cable,Optical Fiber Cable, Speaker Cable,Alarm Cable,Telephone Cable,Drop Wire,Audio Cable,HDMI Cable,Control Cable etc
We also provide cable accessory products such as connector, cable clip,cable tie,crimping tool, antenna dishe,splitters,amplifer,optical receiver,optical transmitter etc
Q2: What's your MOQ? Can you offer free samples?
A: Our MOQ is 10KM per item. Free samples can be sent to you if available in stock,freight cost need to be paid by your side.
Q3: What's your delivery time?
A: Normally, our delivery time is 15 days after received deposit,it base on the quantity of the order.
Q4: What's your payment term?
A: We accept T/T, L/C,Western Union.Other payments accept through negotiation.
Q5:What's your trade term?
A: We accept FOB ShangHai or Ningbo,CFR,CIF,EXW term
Q6: Where is your factory located? How can I visit there?
A: Our factory is located in Lin'An HangZhou City,ZheJiang Province,China.
1 hour drive from HangZhou XiaoShan International Airport
3 hours drive or 1 and half an hour by high speed rail to railway station from shanghai or Ningbo
