Audited Supplier
On the basis of VTP type Vertical Discharge Pump type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60ºC and contain certain solid particles, such as scrap iron, fine sand, coal powder, mud clay, grid etc.
.
VTP Type Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.
Running Data
| Capacity | 20-5000 m3/h |
| Head | 3-150 m |
| Working Temperature | 0-60 ºC |
| Power | 1.5-3400KW |
Vertical turbine emergency submersible drainage pump, This kind of vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water. LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
Product show
Structure Drawing
√ Corrosion resistance main part material, famous brand bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.
Petrochemical Industry pump
Seawater desalination plant or salt water pump
Municipal engineering
City flood control and drainage
Industry plant
Industrial architecture
Sewage treatment engineering
PROJECT NO.1
PROJECT NO.2
PROJECT NO.3 VTP pump for Petrochemical Works
PROJECT NO.4
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L; for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.
More details about our VTP Vertical turbine pump please contact Tongke.
https://tkflow.en.made-in-china.com/contact-info.html
Centered around technological innovation and pursuing superior quality
To be a world-class provider of fluid transfer solutions
Shanghai Tongke Flow Technology Co., Ltd is a technology-based enterprise integrating technological innovation and environmental protection concepts. Since its establishment in 2001, it has always been committed to the cutting-edge research and development and production of fluid conveying products and intelligent fluid equipment, and has been deeply engaged in the field of enterprise energy-saving transformation services. Adhering to the original intention of green development, the company continues to promote the energy-saving and environmental protection upgrading of cutting-edge technology products, and continues to lead the industry innovation trend.
Tongke Flow Technology, as the supplier of a full range of Fluid equipment solutions in the industry, is not only specialized in manufacturing comprehensive fluid equipment products including pumps, motors and efficient control systems, but also adept in customizing high-quality and feasible technical solutions according to client needs to help the efficient operation of enterprise projects and achieve a win-win situation of economic and environmental benefits.
The company has strong technical support, and has created an interdisciplinary and high-quality technical team relying on the rich resources of Shanghai Tongji Nanhui Science and Technology Park, including doctoral supervisors, professors, senior engineers and many senior engineers. They provide inexhaustible driving force for the company's technological innovation and product upgrades by virtue of their profound professional knowledge and rich practical experience.
In terms of production, Tongke Flow Technology shows excellent manufacturing capabilities. Since 2010, the company has established modern production bases in Shanghai, Jiangsu, Dalian and other places, with a total area of 25,000 square meters, production facilities area of more than 15,000 square meters, equipped with 5 efficient production lines, fully covering the pump, motor, control system and other full range of fluid equipment products, to ensure high quality and high efficiency products.
Tongke Flow Technology, excellence in manufacturing. We strive for perfection in every aspect of production and offer comprehensive testing and inspection services to ensure product quality. Customer satisfaction is the gold standard by which we measure our product quality and is the driving force behind our continuous improvement.
In terms of service, Tongke Flow Technology covers major cities all over the county with its business network, and its clients are involved in many fields. The company has successfully carried out technological transformation for nearly 20 large state-owned enterprises and joint-stock enterprises in the Yangtze River Delta, Pearl River Delta, Central China and North China. Our solutions have not only brought significant economic benefits, but also won widespread social praise, especially in the chemical, chemical fiber, steel, fertilizer, pharmaceutical, thermal and other industries.
Looking at the way forward, Tongke Flow Technology will continue to adhere to the core values of professionalism, innovation, and service, and provide clients with high-quality and modern fluid technology solutions by manufacturing and product teams under the leadership of the professional leadership team to create a better future.
ENTERPRISE QUALIFICATION
Since its inception, our company has steadfastly adhered to the core purpose of "focusing on technological innovation, striving for quality enhancement, and committing to providing professional services to solve customer issues." We have continually refined our skills and strengthened our brand image. Over the years, we have not only received numerous authoritative certifications and accolades but have also successfully passed the stringent certifications of ISO 9001-2015 International Quality Management System, ISO 14001 Environmental Management System, and ISO 45001. Occupational Health and Safety Management System. We consistently adhere to international standards, ensuring the stability and reliability of our product and service quality, winning widespread acclaim and trust in the market.
Quality guarantee
Shanghai Tongke flow technology Co., Ltd. always foucs on the Technology design, The company's gist is different operation and the goal is the high-quality, high-performance products. We strive to become a trustworthy professional automobileseat cushion company. We passed the TUV registed ISO 9001 and products is passed SGS inspection.
International Certificate
Services:
1.one year guarantee for whole machine except for wear parts;
2.24 hours technical support by email;
3.calling service;
4.user manual available;
5.reminding for the service life of the wearing parts;
6.installation guide for clients from both China and abroad;
7.maintance and replacement service;
8.whole process training and guidance from our technicians.
FAQ
Q1. Are you a manufacturer?
Yes, we have been in pumps manufacturing and oversea marketing industry over 15 years.
Q2. What markets do your pumps export to?
More than 20 countries and areas, such as South-East Asia, Europe, North & South America, Africa, Oceanic, Middle East countries...
Q3. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, head, medium, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
Q4. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
Q5. How can I get the price of your pump?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
Why choose us?
- Specialized production Manufactory for Pump
- Focus on technological innovation, Over Industry leading level
- Good experience at Domestic and oversea market
- Carefully paint for Good appearance
- Years of International service standards, Engineer one-to-one service
Your call and mail is welcome at any time
