Audited Supplier
PT Series
Socket Terminals
Copper
Environmental Protection
Terminal
Injection Molding
Square
Screw Connection
Wire Connection
ANHUANG
Carton
As standard drawing
China
Product Description
Product description:
UKH150 high current terminal, the product is suitable for the use of 150 square meters of cable, the maximum current bearing capacity 309A, withstand 1000V.
The frame screw structure is adopted in the product, and the cable is crimped by lifting the screw. The M10 inner hexagon screw adopted in this product has strong compression force and good tightness, which is the best choice for the secondary connection of high-current cables.
1.Parameter
PTTB2.5
PT4
PT6
PT10
PTTB2.5
2. Appendix
UKH150 large current terminal attachment with UK series usually use the same terminal attachment, the difference lies in its product volume is big, it needs to be fixed more powerful pressure, and because the connection is big, need to use hex wrench, so the location of the card feet need to stress will also increase, which requires other stick force is large enough to bear the external force when the installation.
The industry uses E/AL-NS35 fasteners, but due to defects in the domestic production process, this product cannot be produced. Therefore, alternative fasteners can be used, including metal fasteners and ordinary E/UK fasteners.
In addition, in the use of guide rail, it is recommended to use a thickness of 1.2 or more, thicker guide rail can have better fitting effect, stability will also be improved.
Label bar use 2B10, other accessories basic industry general.
UKH150 high current terminal, the product is suitable for the use of 150 square meters of cable, the maximum current bearing capacity 309A, withstand 1000V.
The frame screw structure is adopted in the product, and the cable is crimped by lifting the screw. The M10 inner hexagon screw adopted in this product has strong compression force and good tightness, which is the best choice for the secondary connection of high-current cables.
1.Parameter
PTTB2.5
| Standards: | IEC60947-7-1 | ||
| Length is 48.6mm | Height is 35 mm | Width is 5.2 mm | |
| Voltage 800V | Current 32A | ||
| Wiring Range mm | 0.25-2.5mm | ||
| Baffle | D-PT2.5 | ||
| Flame Retardant Grade: | FBS 10-5 | ||
| Fastener | E/UK | ||
| Shell Material | PA66 Flame Retardant Nylon | ||
| Wire Frame Material | Stainless Steel | ||
| Article tag | ZBF 5 | ||
| Conductor Material | Red Copper | ||
PT4
| Standards: | IEC60947-7-1 | |||
| Length is 56mm | Height is 35 mm | Width is 6.2 mm | ||
| Voltage 800V | Current 41A | |||
| Wiring Range mm | 0.25-4mm | |||
| Baffle | D-PT4 | |||
| Flame Retardant Grade: | FBS 10-6 | |||
| Fastener | E/UK | |||
| Shell Material | PA66 Flame Retardant Nylon | |||
| Wire Frame Material | Stainless Steel | |||
| Article tag | ZBF 6 | |||
| Conductor Material | Red Copper | |||
PT6
| Standards: | IEC60947-7-1 | ||
| Length is 58mm | Height is 42 mm | Width is 8.2 mm | |
| Voltage 1000V | Current 57A | ||
| Wiring Range mm | 0.25-4mm | ||
| Baffle | D-PT4 | ||
| Flame Retardant Grade: | FBS 10-8 | ||
| Fastener | E/UK | ||
| Shell Material | PA66 Flame Retardant Nylon | ||
| Wire Frame Material | Stainless Steel | ||
| Article tag | ZBF 8 | ||
| Conductor Material | Red Copper | ||
PT10
| Standards: | IEC60947-7-1 | ||
| Length is 68mm | Height is 50 mm | Width is 10.2 mm | |
| Voltage 1000V | |||
| Wiring Range mm | 0.5-10mm | ||
| Baffle | D-PT10 | ||
| Flame Retardant Grade: | FBS 10-10 | ||
| Fastener | E/UK | ||
| Shell Material | PA66 Flame Retardant Nylon | ||
| Wire Frame Material | Stainless Steel | ||
| Article tag | ZBF 10 | ||
| Conductor Material | Red Copper | ||
PTTB2.5
| Standards: | IEC60947-7-1 | ||
| Length is 68mm | Height is 46 mm | Width is 5.2 mm | |
| Voltage 500V | Current 31A | ||
| Wiring Range mm | 0.25-2.5mm | ||
| Baffle | D-PTTB2.5 | ||
| Flame Retardant Grade: | FBS 10-5 | ||
| Fastener | E/UK | ||
| Shell Material | PA66 Flame Retardant Nylon | ||
| Wire Frame Material | Stainless Steel | ||
| Article tag | ZBF 5 | ||
| Conductor Material | Red Copper | ||
UKH150 large current terminal attachment with UK series usually use the same terminal attachment, the difference lies in its product volume is big, it needs to be fixed more powerful pressure, and because the connection is big, need to use hex wrench, so the location of the card feet need to stress will also increase, which requires other stick force is large enough to bear the external force when the installation.
The industry uses E/AL-NS35 fasteners, but due to defects in the domestic production process, this product cannot be produced. Therefore, alternative fasteners can be used, including metal fasteners and ordinary E/UK fasteners.
In addition, in the use of guide rail, it is recommended to use a thickness of 1.2 or more, thicker guide rail can have better fitting effect, stability will also be improved.
Label bar use 2B10, other accessories basic industry general.
