Elevator Equipments Conveyor No Contact Belt Deviation Sway Sensor Switch

Price $50.59 Compare
Min Order 1 Piece
Shipping From Jiangsu, China
Popularity 407 people viewed
Quantity
+-
 

Nanjing Bangxu Housewares Co., Ltd.

VIP   Audited Supplier 3 years
Profile Certified by SGS/BV
JPNS-II-G
Belt Sway Switch
Pyroelectric
3 Wires
Standard
Industrial Automation
IP66
Switch Signal
Automatic Resetting
Carton Cushioning Packing
Standard
China
Product Description
Technique Parameters:
Working Voltages:220VAC±15%Load Current:≤5A
Insulation rResistance:>500MΩOutput Singal:Switch Singal
Environment temperature:-20ºC~+60ºCEnvironment Humidity:<90%
Weight :2KgIP Grade:IP66
Resetting Mode: Automatic ResettingResponsive Time:<2mS
Control Contact Capacity:250V/5AForce :50±10N



Installation Diagram

Installation Size Diagram

Introduction
No contact belt sway switch is mainly used in the instant data monitoring of the long distance working condition of the long distance belt transportation machine. It adopts the on sight(RS845bus) to realize the long distance alarming function. It is highly time effectiveness.It can effectively protect the equipment and people's safety and avoid the extension of the accident to ensure the production, and protect the equipment. Also the signal can reach the controlling system to realize the factory automatic control. So to reach the purpose of reduce the employee and increase the efficiency. Concentrating the controlling and make benefit to the production and arranging.

Application
The machine can be widely used in belt transportation used industries like Steel, Power Station, Chemicals, Cement, Coal, Metallurgy, Mining, Port, Grain Warehouse, etc.

Working principle
This no contact sway belt switch is installed on the both sides of the walls of the elevators.when we installit, we should pay attention that the distance between damper and belt should be set over the safety distance(the distance can be adjusted,it is determined by the user and it is based on the rational sway scope of the carft documents agreement).

when the belt goes outward, it will fricted on the damper and the damper will be sent to the adjustment bar, the bar will take action on the senor and the sensor will give out the alamring signals.

Product Display











Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA