Audited Supplier
GS
Passive inverter
CCC, ISO9001, RoHS, CE, SAA
1000W-12000W
off-Grid Inverter
Single
Full-Bridge Type
Sine Wave Inverter
DC/AC Inverters
Pumps, Motor, Welding Machine etc
Voltage, Frequency, Battery Ststus, PV
60A Power Inverter
12V for 40vdd, 24V for 55 VDC, 48V for 145VDC
12/24/48VDC ( Inverter Inverex)
Forced Air, Variable Speed Fan
2 Years
off Gris Hybrid Low Frequency Inverter
120VAC for Max 150VAC 230VAC for Max270VAC
Available
ZLPOWER
Carton/Wooden Case
CE
Shenzhen
8504409900
Product Description
10KW Solar Power System off Grid Hybrid Pure Sine Wave Power Inverter AC Charger Inverter
Key features:
♦ GS Series AC/Solar charging hybrid off grid inverter.
♦ LED/LCD display, Enhanced functions setting via LCD.Man-machine intelligent design.
♦ Built-in 40A/60A optional MPPT solar charger controller.
♦ Remote external display panel realize remote operation.
♦ 5 stages adjustable AC charging current. AC charging also can be closed.
♦ AC/DC priority modes can be set.
♦ Generator restart signal. (Dry contact).
♦ 3 times peak power. Strong loading capacity.
♦ Overload, output short-circuit protection.
Specification:
| Model Parameters | GS1000 | GS2000 | GS3000 | GS4000 | GS5000 | GS6000 | GS8K | GS10K | GS12K | |
| AC Input | Nominal Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | 8KW | 10KW | 12KW |
| Input Voltage Waveform | sinusoidal(utility or generator) | sinusoidal(utility or generator) | sinusoidal(utility or generator) | |||||||
| Nominal input Voltage | 120VAC/230VAC | 120VAC/230VAC | 120VAC/230VAC | 120VAC/230VAC | 120VAC/230VAC | 120VAC/230VAC | 230VAC | 230VAC | 230VAC | |
| Low Line Disconnect | 85Vac±4%(Normal) or 80Vac±4% (Wide) for 120V 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | 85Vac±4%(Normal) or 80Vac±4% (Wide) for 120V 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | |||||||
| Low Line Re-connect | 95Vac±4%(Normal) or 85Vac±4% (Wide) for 120V 194Vac±4%(Normal) or 145Vac±4%(Wide) for 230V | 95Vac±4%(Normal) or 85Vac±4% (Wide) for 120V 194Vac±4%(Normal) or 145Vac±4%(Wide) for 230V | 194Vac±4%(Normal) or 145Vac±4%(Wide) for 230V | |||||||
| High Line Disconnect | 136Vac±4%(Normal) or 145Vac±4%(Wide) for 120V 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | 136Vac±4%(Normal) or 140Vac±4%(Wide) for 120V 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | |||||||
| Max AC input Voltage | 120V for Max150V, 230V for Max270V | 120V for Max150V, 230V for Max270V | 230V for Max270V | |||||||
| Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz | 50Hz:41-54Hz, 60Hz:51-64Hz | 50Hz:41-54Hz, 60Hz:51-64Hz | |||||||
| AC Output | Output Voltage Waveform | Sine wave | Sine wave | Sine wave | ||||||
| Power Factor | 0.9~1.0 | 0.9~1.0 | 0.9~1.0 | |||||||
| Nominal Output Voltage (V) | LV:120Vac ±10%rms, HV:230Vac ±10%rms | LV:120Vac ±10%rms, HV:230Vac ±10%rms | LV:120Vac ±10%rms, HV:230Vac ±10%rms | |||||||
| Nominal Output Frequency (Hz) | 50Hz ± 0.3Hz, 50Hz ± 0.3Hz | 50Hz ± 0.3Hz, 60Hz ± 0.3Hz | 50Hz ± 0.3Hz, 60Hz ± 0.3Hz | |||||||
| Solar charger | Rated Charge Current | 40A | 60A | 60A/120A | 60A/120A | |||||
| PV Input Voltage range | 15VDC-40VDC for 12VDC, 25VDC-75VDC for 24VDC, 55-145VDC for 48V | 25VDC-75VDC for 24VDC, 55-145VDC for 48V | 55-145VDC for 48V | |||||||
| Max.PV open circuit array voltage | 12V for 40Vdc, 24V for 75Vdc, 48V for 145Vdc | 24V for 75Vdc, 48V for 145Vdc | 48V for 145Vdc | |||||||
| Charger mode | MPPT | MPPT | MPPT | |||||||
| PV Low Voltage Re-connect | PV≥Bat.V+3V | PV≥Bat.V+3V | PV≥Bat.V+3V | |||||||
| PV Low Voltage Disconnect | PV<=Bat.V | PV<=Bat.V | PV<=Bat.V | |||||||
| Efficiency | ≥97% | ≥97% | ≥97% | |||||||
| AC Charger | Nominal Charger Current | 20A/35A/50A/70A/90A( 5 stages adjustable charging current) | 20A/35A/50A/70A/90A( 5 stages adjustable charging current) | 20A/35A/50A/70A/90A( 5 stages adjustable charging current) | ||||||
| Over charge Protection | Bat.V≥15.5VDC for 12V battery Bat.V≥31.0VDC for 24V battery Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | Bat.V≥31.0VDC for 24V battery Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | |||||||
| Efficiency | Efficiency(Battery Mode) | ≥87% | ≥87% | ≥87% | ||||||
| Efficiency (Line Mode) | >98% | >98% | >98% | |||||||
| Battery Voltage | Nominal DC input Voltage | 12VDC/24VDC/48VDC | 12VDC/24VDC/48VDC | 12VDC/24VDC/48VDC | 24VDC/48VDC | 24VDC/48VDC | 24VDC/48VDC | 48VDC | 48VDC | 48VDC |
| Low Battery Alarm | 10.5VDC±0.3VDC for 12VDC 21VDC±0.6VDC for 24VDC 42VDC±1.2VDC for 48VDC | 21VDC±0.6VDC for 24VDC 42VDC±1.2VDC for 48VDC | 42VDC±1.2VDC for 48VDC | |||||||
| Low DC input shut & down | 10VDC±0.3VDC for 12VDC 20VDC±0.6VDC for 24VDC 40VDC±1.2VDC for 48VDC | 20VDC±0.6VDC for 24VDC 40VDC±1.2VDC for 48VDC | 40VDC±1.2VDC for 48VDC | |||||||
| High DC input Alarm & Fault | 16VDC±0.3VDC for 12VDC 32VDC±0.6VDC for 24VDC 64VDC±1.2VDC for 48VDC | 32VDC±0.6VDC for 24VDC 64VDC±1.2VDC for 48VDC | 64VDC±1.2VDC for 48VDC | |||||||
| Transfer Time | AC to DC | 20ms(max) | 20ms(max) | 20ms(max) | ||||||
| DC to AC | 15ms(max) | 15ms(max) | 15ms(max) | |||||||
| System Parameter | Over-Load Protection | 110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off the output,load>150%, beeps 0.5s every 1s, and Fault after 20s | 110%<load<150%,beeps 0.5s every 1s,and Fault after 60s off the output,load>150%,beeps 0.5s every 1s,and Fault after 20s | 110%<load<150%,beeps 0.5s every 1s,and Fault after 60s off the output,load>150%,beeps 0.5s every 1s,and Fault after 20s | ||||||
| Output Short Circuit Protection | Current limit (Fault after 10s) | Current limit (Fault after 10s) | Current limit (Fault after 10s) | |||||||
| Surge Rating(10s) | 1:3(VA) | 1:3(VA) | 1:3(VA) | |||||||
| Power Saver | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | |||||||
| Protections | Low battery, over charging, over load, over temp | Low battery, over charging, over load, over temp | Low battery, over charging, over load, over temp | |||||||
| Indicators | LED+LCD Display | LED+LCD Display | LED+LCD Display | |||||||
| General Specifications | Operating Temperature Range | 0ºC~40ºC | 0ºC~40ºC | 0ºC~40ºC | ||||||
| Storage Temperature | -15ºC~60ºC | -15ºC~60ºC | -15ºC~60ºC | |||||||
| Operation humidity | 5% to 95%(non-condensing) | 5% to 95%(non-condensing) | 5% to 95%(non-condensing) | |||||||
| Audible Noise | 60dB max | 60dB max | 60dB max | |||||||
| cooling | Forced air,variable speed fan | Forced air, variable speed fan | Forced air, variable speed fan | |||||||
| Dimension(L*W*H) | 480*336*190mm | 530*400*190mm | 627*416*204mm | |||||||
| Net Weight(kg) | 19.5kg | 23.5kg | 28kg | 30kg | 35.5kg | 39kg | 52.5kg | 58.5kg | 66.5kg | |
FAQ:
Q 1. What's the payment terms and payment method ?
A. We accept L/C, T/T, Credit Card, Western Union, Money Gram, etc.
Usually 30% deposit, 70% before shipment.
Q 2. How's the delivery time ?
A. It usually takes about 3-10 days after payment arrived.
Q 3. How about package ?
A. For the small UPS and the inverters less than 30kg will be packed in foams and cartons. For the big UPS and inverters heavier than 30kg will be packed in pallets or wood boxes .
Q 4. Would you accept to print our logo and design ?
A. Yes, we can print your logo on the inverters, UPS and cartons. Also welcomed your own design of these inverters and UPS.
Q 5. What kind of certificates you have ?
A. For company have ISO9001, ISO14001, TUV and SGS factory certification.
For UPS and power inverters, we have CE,IEC, KC and ETL, etc.
Q6. When the product have problem, how to solve it ?
A. We have a professional after-sales team, in case of any problems, first contact us to help you solve, we have a 24 months warranty and lifetime technical support. We will track product usage until you are satisfied.
CONTACT WAY:
https://zlpower.en.made-in-china.com/contact-info.html
