Audited Supplier
MAG-BONDED
Electronic Products, Speaker Magnet, Industrial Magnet, Motor Magnet
Ring
Ni-Cu-Ni
N35-N54-36H
Customized
Customer Request
ISO9001, SGS
NdFeB
Carton Box
Customized
Ningbo
Product Description
Permanent Rare Earth Injection Bonding Ring NdFeB Neodymium Rotor Magnets
Product Description
Injection bonded pressed magnets are the result of the union between thermoplastic binders and permanent
magnet powders, and can be made in isotropic or anisotropic qualities.
Injected bonded magnets have excellent mechanical properties that allow us to achieve tight tolerances facilitating
the balanceand assembly of the same.This material allows the creation of more complex geometries. IMA currently
manufactures this product for numerous clients; engine manufacturers, magnetic encoders of household appliances,
washers and motors, automotive.
| Product Name | Bonded Ndfeb Magnets |
| Material | NdFeB / Ferrtie |
| Demension | Customized |
| Coating | Epoxy |
| Shape | Disk, Block, Ball, Ring, Cylinder etc. or customized |
| Magnetization Direction | Thickness, Length, Axially, Diametre, Radially, Multipolar |
| Application | Motors and sensors used in a range of products, including computer and office equipment (e.g., hard disk drives and optical disk drive motors and fax, copier and printer stepper motors), consumer electronics (e.g., personal video recorders and mp3 music players), automotive and industrial applications (e.g., instrument panel motors, seat motors and air bag sensors) and home ventilation systems (e.g., ceiling fans) |
| Packaging | Cystosepiment, Carton Box |
| Delivery Time | 15-30 days |
Injection bonded pressed magnets are the result of the union between thermoplastic binders and permanent
magnet powders, and can be made in isotropic or anisotropic qualities.
Injected bonded magnets have excellent mechanical properties that allow us to achieve tight tolerances facilitating
the balanceand assembly of the same.This material allows the creation of more complex geometries. IMA currently
manufactures this product for numerous clients; engine manufacturers, magnetic encoders of household appliances,
washers and motors, automotive.
Parameter of Bonded Magnets
| Molding method | Binder | Grade | The main magneticphysical property | (Tw)max ºC | |||||||||||||||
| Br | HCB | HCJ | (BH)max | ||||||||||||||||
| T | kGs | kA/m | KOe | kA/m | KOe | kJ/m3 | MGOe | ||||||||||||
| Mon. | Min. | Mon. | Min. | Mon. | Min. | Mon. | Min. | Mon. | Min. | Mon. | Min. | Nom. | Min. | Nom. | Min. | ||||
| Compression Isotropic NdFeB | Epoxy | NBE-2 | 0.4 | 0.3 | 4 | 3 | 240 | 160 | 3.0 | 2.0 | 600 | 440 | 7.5 | 5.5 | 26 | 19 | 3.3 | 2.4 | 120 |
| NBE-3 | 0.51 | 0.4 | 5.1 | 4 | 280 | 216 | 3.5 | 2.7 | 680 | 504 | 8.5 | 6.3 | 32 | 24 | 4.0 | 3.0 | 120 | ||
| NBE-4 | 0.52 | 0.46 | 5.2 | 4.6 | 288 | 224 | 3.6 | 2.8 | 680 | 504 | 8.5 | 6.3 | 35 | 30 | 4.4 | 3.8 | 120 | ||
| NBE-5 | 0.55 | 0.47 | 5.5 | 4.7 | 360 | 240 | 4.5 | 3.0 | 680 | 520 | 8.5 | 6.5 | 44 | 37 | 5.5 | 4.6 | 120 | ||
| NBE-6 | 0.65 | 0.55 | 6.5 | 5.5 | 376 | 320 | 4.7 | 4.0 | 720 | 600 | 9.0 | 7.5 | 52 | 44 | 6.5 | 5.5 | 120 | ||
| NBE-7 | 0.65 | 0.55 | 6.5 | 5.5 | 408 | 320 | 5.1 | 4.0 | 680 | 560 | 8.5 | 7.0 | 64 | 52 | 8.0 | 6.5 | 120 | ||
| NBE-8 | 0.67 | 0.62 | 6.7 | 6.2 | 456 | 400 | 5.7 | 5.0 | 800 | 640 | 10.1 | 8.0 | 76 | 64 | 9.5 | 8.0 | 120 | ||
| NBE-8T | 0.68 | 0.62 | 6.8 | 6.2 | 480 | 400 | 6.0 | 5.0 | 1280 | 1040 | 16.1 | 13.1 | 73 | 65 | 9.2 | 8.2 | 160 | ||
| NBE-9L | 0.73 | 0.67 | 7.3 | 6.7 | 416 | 360 | 5.2 | 4.5 | 640 | 520 | 8.0 | 6.5 | 75 | 68 | 9.4 | 8.5 | 120 | ||
| NBE-9 | 0.7 | 0.65 | 7 | 6.5 | 456 | 416 | 5.7 | 5.2 | 800 | 680 | 10.1 | 8.5 | 76 | 68 | 9.5 | 8.5 | 120 | ||
| NBE-9T | 0.7 | 0.65 | 7 | 6.5 | 488 | 432 | 6.1 | 5.4 | 1040 | 920 | 13.1 | 11.6 | 80 | 71 | 10.1 | 8.9 | 140 | ||
| NBE-10 | 0.72 | 0.67 | 7.2 | 6.7 | 480 | 424 | 6.0 | 5.3 | 800 | 640 | 10.1 | 8.0 | 84 | 76 | 10.6 | 9.5 | 120 | ||
| NBE-10T | 0.71 | 0.65 | 7.1 | 6.5 | 480 | 432 | 6.0 | 5.4 | 960 | 784 | 12.1 | 9.8 | 82 | 74 | 10.3 | 9.3 | 140 | ||
| NBE-11 | 0.74 | 0.68 | 7.4 | 6.8 | 480 | 400 | 6.0 | 5.0 | 800 | 640 | 10.1 | 8.0 | 88 | 80 | 11.1 | 10.1 | 120 | ||
| NBE-12L | 0.77 | 0.73 | 7.7 | 7.3 | 432 | 368 | 5.4 | 4.6 | 640 | 520 | 8.0 | 6.5 | 88 | 80 | 11.1 | 10.1 | 120 | ||
| NBE-12 | 0.77 | 0.72 | 7.7 | 7.2 | 520 | 440 | 6.5 | 5.5 | 880 | 720 | 11.1 | 9.0 | 96 | 88 | 12.1 | 11.1 | 120 | ||
| NBE-13L | 0.83 | 0.78 | 8.3 | 7.8 | 480 | 400 | 6.0 | 5.0 | 640 | 480 | 8.0 | 6.0 | 104 | 88 | 13.1 | 11.1 | 120 | ||
| Injection Isotropic NdFeB | PA6/PA12 | NIA-3 | 0.45 | 0.35 | 4.5 | 3.5 | 280 | 200 | 3.5 | 2.5 | 460 | 400 | 5.8 | 5.0 | 28 | 20 | 3.5 | 2.5 | 100/120 |
| NIA-4 | 0.5 | 0.4 | 5 | 4 | 320 | 240 | 4.0 | 3.0 | 720 | 560 | 9.0 | 7.0 | 36 | 28 | 4.5 | 3.5 | 100/120 | ||
| NIA-5 | 0.55 | 0.45 | 5.5 | 4.5 | 360 | 304 | 4.5 | 3.8 | 800 | 640 | 10.1 | 8.0 | 44 | 36 | 5.5 | 4.5 | 100/120 | ||
| NIA-6 | 0.6 | 0.5 | 6 | 5 | 384 | 328 | 4.8 | 4.1 | 800 | 640 | 10.1 | 8.0 | 52 | 44 | 6.5 | 5.5 | 100/120 | ||
| NIA-7 | 0.65 | 0.55 | 6.5 | 5.5 | 400 | 344 | 5.0 | 4.3 | 800 | 640 | 10.1 | 8.0 | 60 | 52 | 7.5 | 6.5 | 100/120 | ||
PPS | NIP-4 | 0.48 | 0.4 | 4.8 | 4 | 370 | 315 | 4.6 | 4.0 | 800 | 650 | 10.1 | 8.2 | 36 | 32 | 4.5 | 4.0 | 140 | |
| NIP-5 | 0.5 | 0.42 | 5 | 4.2 | 440 | 380 | 5.5 | 4.8 | 900 | 720 | 11.3 | 9.0 | 40 | 35 | 5.0 | 4.4 | 140 | ||
| NIP-6 | 0.55 | 0.46 | 5.5 | 4.6 | 460 | 400 | 5.8 | 5.0 | 850 | 680 | 10.7 | 8.5 | 50 | 44 | 6.3 | 5.5 | 140 | ||
| Injection Anisotropic NdFeB | PA6/PA12 | NIA-12 | 0.8 | 0.7 | 8 | 7 | 500 | 445 | 6.3 | 5.6 | 995 | 915 | 12.5 | 11.5 | 100 | 92 | 12.6 | 11.6 | 100/120 |
| NIA-15 | 0.85 | 0.78 | 8.5 | 7.8 | 575 | 530 | 7.2 | 6.7 | 1235 | 1155 | 15.5 | 14.5 | 124 | 116 | 15.6 | 14.6 | 100/120 | ||
| Injection Molded Ferrite | PA6/PA12 | FIA-15 | 0.26 | 0.21 | 2.6 | 2.1 | 193 | 183 | 2.4 | 2.3 | 255 | 215 | 3.2 | 2.7 | 12 | 10 | 1.5 | 1.3 | 120/130 |
| FIA-19 | 0.28 | 0.23 | 2.8 | 2.3 | 205 | 195 | 2.6 | 2.4 | 255 | 215 | 3.2 | 2.7 | 15 | 12 | 1.9 | 1.5 | 120/130 | ||
| FIA-20 | 0.3 | 0.25 | 3 | 3 | 203 | 193 | 2.6 | 2.4 | 247 | 207 | 3.1 | 2.6 | 16.6 | 13.6 | 2.1 | 1.7 | 120/130 | ||
| FIA-22 | 0.31 | 0.26 | 3.1 | 3.1 | 209 | 199 | 2.6 | 2.5 | 253 | 213 | 3.2 | 2.7 | 17.6 | 14.5 | 2.2 | 1.8 | 120/130 | ||
| PPS | FIP-15 | 0.25 | 0.2 | 2.5 | 2 | 179 | 169 | 2.2 | 2.1 | 246 | 206 | 3.1 | 2.6 | 12.2 | 10 | 1.5 | 1.3 | 180 | |
| FIP-17 | 0.27 | 0.22 | 2.7 | 2.2 | 189 | 179 | 2.4 | 2.2 | 242 | 202 | 3.0 | 2.5 | 13.9 | 11.2 | 1.7 | 1.4 | 180 | ||
| Composite Ferrite Injection Molded Magnets | PA11/PA12 | SFA-30 | 0.37 | - | 3.7 | - | 204 | - | 2.6 | - | 384 | - | 4.8 | - | 26.4 | - | 3.3 | - | 120/130 |
| SFA-40 | 0.44 | - | 4.4 | - | 243 | - | 3.1 | - | 500 | - | 6.3 | - | 34.4 | - | 4.3 | - | 120/130 | ||
| SFA-50 | 0.49 | - | 4.9 | - | 282 | - | 3.5 | - | 521 | - | 6.5 | - | 42 | - | 5.3 | - | 120/130 | ||
| SFA-60 | 0.54 | - | 5.4 | - | 321 | - | 4.0 | - | 541 | - | 6.8 | - | 51 | - | 6.4 | - | 120/130 | ||
| SFA-70 | 0.57 | - | 5.7 | - | 349 | - | 4.4 | - | 551 | - | 6.9 | - | 58.4 | - | 7.3 | - | 120/130 | ||
FAQ
Q: How to get prompt quotation?
A: Kindly offer us your requirements about magnet grade, size, quantity, coating, magnetic direction, work tempreture ect.. Then best price will be offered during 24 hours.
Q: How long is your lead time?
A: Generally it is 5-10 days if the goods or materials are in stock. or it is 30-35 days for new production, it is according to the order quantity.
Q: What's your MOQ ?
A: We have no strict MOQ , if we can do , we will try our best to cooperate. If any questions as small quantity , we will be open to communicate with you for better solution.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
Q: How to get prompt quotation?
A: Kindly offer us your requirements about magnet grade, size, quantity, coating, magnetic direction, work tempreture ect.. Then best price will be offered during 24 hours.
Q: How long is your lead time?
A: Generally it is 5-10 days if the goods or materials are in stock. or it is 30-35 days for new production, it is according to the order quantity.
Q: What's your MOQ ?
A: We have no strict MOQ , if we can do , we will try our best to cooperate. If any questions as small quantity , we will be open to communicate with you for better solution.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
