Audited Supplier
The high-speed 100-ton hydraulic compressed earth block machine is a large-scale improved mechanical equipment, which is mainly used to press various clays and other cohesive soils into various shapes of bricks, tiles and building materials. The specific structure and definition are as follows:
1. Pressure system: The high-speed 100-ton hydraulic earth machine adopts a hydraulic system, including an oil source, oil pump, pressure valve, and especially a 100-ton grade oil cylinder, etc., which are mainly used to provide the pressure required for pressing.
2. Gearbox: The gearbox is an important part of the machine, mainly used to transmit power and provide sufficient speed and torque. As the hydraulic oil flowing speed normally slows down while the oil quantity gets more, the gearbox can push oil recycle more quickly.
3. Pressing system: The hydraulic pressure drives the oil cylinder to slide the pressing plate towards the mold box and press the earth into the mold to form various shapes of blocks, tiles, and building materials.
4. Mold: The mold is mainly made of manganese steel and 345-type steel plate after heat treatment. It is used to shape earth and clay. You can change different molds at will and press out different types of interlocking bricks. It is also straightforward to replace molds, and The price is also very favorable.
5. Control system: The control system is used to adjust the pressure, speed and other factors during the pressing process through PLC, solenoid valve, oil valve and other electronic equipment to ensure the quality and efficiency of pressing.
| Overall Size | 3200*1850*3400mm |
| Shaping Cycle | 10-15 seconds |
| Main Power | 18.5kw |
| Voltage | 380v/50 hz 3 phase ( Adjustable) |
| Production Capacity | 2000-2400 bricks / per hour |
| Pressure | 200 tons ( Adjustable ) |
| Total Weight | 5500kgs |
HR 10-10 has more advantages more than previous models :
1. 35 MPa plunger pump is stable and efficient
2. Advanced PLC control system, PLC comes from Delta
3. Touch screen design, the man-machine interface is simpler and easier to understand
4. 200 tons of design pressure is enough to make high-density bricks
5. The compression ratio can be adjusted to adapt to different raw materials
Safe,Suitable for corrosive, toxic or high and low temperature media, Fast response, controlled within tens of milliseconds
Carburizing,heat treatment, wear resistance. Wire cutting technology,small error Carbon dioxide protection welding the welding body is firm and does not crack
High efficiency motor special line guarantee of strong power Long service life adapt to different needs
Brand electronic components, fast response, stable performance, good quality, long life, reasonable layout, easy to replace
The airbag clip out brick to avoid damage to the bottom of the brick The inlet pressure is adjustable suitable for various sizes of bricks Made of imported rubber long life, not easy to get old
Using national standard 345# steel plate, high strength, high toughness, good wear resistance, crack resistance and oxidation resistance
Related Products
Q: How many kinds of block can be made by this machine ?
A: by changing mold, this machine can make all type design brick ,block or even paver.
Q:Will you provide installation support?
A: we will provide installation video and manual book.online video avaiable also.
Q:What is your Minimum Order Quantity?
A:Minimum order quantity is 1 set machine, anyway, special will bu give on larger scale.
Q:How does your factory do regarding quality control?
A:Quality first,customers foremost".We always attach great importance to quality controlling from the very beginning to very end.
Q:May I visit your factory?
A:Sure,welcome any time .We can also pick you up at airport and station.
If you are interested in our products please contact with us.We will reply you as soon as possible. We believe that we are always your honest and reliable supplier.
