Manufacture Supply Directly High Accuracy High Pressure Coriolis Mass Flowmeter for Process Control Metering

Manufacture supply directly High Accuracy High Pressure Coriolis Mass Flowmeter for Process Control Metering

A mass flow meter for process control metering is a crucial instrument used in various industries to measure the mass flow rate of a fluid (liquid or gas) moving through a pipeline. It provides highly accurate, real-time data that is essential for maintaining optimal process control.

Phase Difference:The phase difference is caused by the Coriolis force, which is generated when the medium moves in a rotating system. The Coriolis force at the inlet of the flowmeter opposes the movement of the measuring tube, while the Coriolis force at the outlet of the flowmeter helps the measuring tube move. This results in a phase difference between the two detectors, as shown in the figure on the right.

1. High Accuracy:
   Mass flow meters, especially Coriolis and thermal types, offer precise measurements, often with an accuracy of ±0.1% or better. This level of precision is critical for processes requiring tight control, such as chemical reactions, blending, or batching.

2. Direct Mass Flow Measurement:
   Unlike volumetric flow meters, which measure the volume of fluid passing through a point, mass flow meters directly measure the mass of the fluid, making them ideal for applications where mass flow is more relevant (e.g., in chemical dosing or fuel consumption).

3. Wide Range of Fluid Compatibility:
   Mass flow meters can handle a variety of fluids, including gases, liquids, and slurries. They are widely used in industries like oil and gas, chemical processing, pharmaceuticals, and food and beverage.

4. Process Control Integration:
   These meters are often integrated into process control systems (such as DCS or PLCs), providing continuous feedback and allowing automated control of flow rates, ensuring that the process stays within the desired operating parameters.

5. Multivariable Measurement:
   Some mass flow meters, like Coriolis meters, can measure additional variables such as fluid density, temperature, and viscosity, enabling a more comprehensive understanding of the process conditions.

6. Robust Design for Harsh Environments:
   Mass flow meters are built to withstand extreme conditions such as high pressures, high temperatures, and corrosive or abrasive fluids. This makes them ideal for harsh industrial environments, such as those found in petrochemical and oil refining processes.

7. Minimal Maintenance:
   Due to their solid-state design and lack of moving parts, mass flow meters typically require less maintenance and have a long service life, contributing to lower operational costs over time.

• Chemical Dosing: To precisely control the amount of chemicals injected into a process.Chemical Including applications such as liquid paraffin metering, methanol metering, hydrogen peroxide metering, chemical raw material metering, xylene metering, and agricultural raw material metering
• Batch Processing: Ensuring accurate measurement of ingredients in pharmaceutical or food production.
• Fuel and Energy Management: Monitoring fuel consumption in power generation or transportation systems.
• Oil & Gas: Metering oil, gas, and LNG for precise measurement during transportation, storage, and processing.

All the products  certificated by ATEX, CCS, IECEx and PESO .

It can be used to directly measure the mass flow rate of fluid in pipeline without the influence of temperature, pressure and flow velocity.
High accuracy and excellent repeatability. Wide range ratio (100:1).
Cryogenic and high pressure calibration is employed for high -pressure flowmeter. Compact structure and strong installation interchangeability. Small pressure loss and wide range of working conditions.
The hydrogen mass flowmeter has excellent small flow measurement performance, which can fully meet the working conditions of the hydrogen dispensers. There are currently two types of hydrogen mass flowmeters: 35MPa and 70MPa (rated operating pressure). Due to the high safety requirements of hydrogen flowmeter, we have obtained the IIC explosion-proof certificate.

 

Model	AMF015SN		AMF020SN	AMF006H
DN	DN15		DN20	DN6
Accuracy	0.15%, 0.2%, 0.5%,
Denisty	Density: ±0.001g/cm
Medium	Liquid /Gas
Max flow	30kg/min	70kg/min		20kg/min
Working pressure	≤25MPa			≤100MPa
Connection	(Internal Thread)	G1 (internal thread)		13/16-16UNF
Wetting Material	304,316L
Expl.-Proof	IP67 Ex d ib ii C T1-T5 Gb
Accuracy	0.1% (Optional), 0.15%, 0.2%, 0.5% (Default)
Repeatability	0.05% (Optional), 0.075%, 0.1%, 025%(Default)
Density	±0.001g/cm3
Temp.	±1°C
Answer the liquid material	304 , 316L, ( Customizable: Monel 400, Hastelloy C22 , etc.)
Measuring medium	Gas, Liquid and Multi-phase flow

 

>>Application: measure the flow of gases, liquids, and other fluids. They are widely used in the measurement of high-pressure gases such as CNG, Hydrogen.

Mass flow meters are known for their high accuracy, wide measuring range and reliable performance, and have been successfully used in various industries over the past many years.
Unlike other instruments that are limited to measuring liquids at normal pressure and temperature, ANDISOON excels in measuring under challenging conditions, including high pressure, high viscosity, and high and low temperatures. For example, when measuring CNG (compressed natural gas), the difficulty lies in the high pressure. However, ANDISOON's sensors can withstand high pressures, allowing the necessary increase in flow tube thickness, allowing the transmitter to detect signals with greater sensitivity. Therefore, ANDISOON's mass flow meters specially designed for CNG gas dispensers have been widely used in the domestic market
In the field of cryogenics, Andisoon has developed a backflow meter and a liquid phase injection meter for LNG refueling stations, with a minimum temperature of -196°C.
In the field of process control, Andisoon has developed a micro-bend type mass flowmeter, with a maximum flow rate of up to 300t/h, widely used in petroleum, chemical and other industrial conditions.
 

Why choose uS?

(1) For electronic products, we have automatic chip mounter (SMT) production line and high/low temp. testing equipment.
(2) For mechanical products, we have advantage on casting, machining, and welding which is the key point in eyes of Russian.
(3) For calibration, we have calibration facilities approved by China government for oil, water and gas.
(4) For flowmeter, we are Top leaders in China for both of Coriolis Mass Flowmeter & PD flowmeter, which be approved the UL, CE, CCS (China) and BV certificate (France) for marine market.
(5) For pump, we combined Russian  technology with China low cost to manufacture for large capacity transportation of oil, chemical, water, and wastewater even if contain some participles and we also design and produce twin-screw pump for high pressure, high viscosity liquid with multiphase.
(6) For SCADA loading & metering/ Skid Mount System, we also have much experience in China and in Afghanistan, Equatorial Guinea and are trying to promote in all over the world.

FAQ

1. Customer: What is the delivery date?
Andisoon: Our stock is based on GB/DIN flange, with a delivery date of 10 days. We also accommodate other flanges like ANSI/JIS or thread connection, with a delivery date of 15 days.

2. Customer: Can you design according to my requirements?
Andisoon: Yes, we offer OEM service and can tailor products to your specifications.

3. Customer: What is the warranty period?
Andisoon: The quality guarantee period is 12 months from the completion of installation and commissioning by the purchaser, or 14 months from the date of delivery (whichever comes first), excluding maintenance kits or small accessories.