Audited Supplier
0.1-5mm
CE, ISO
Smooth
Transportation Project, Hydraulic Project, Geotechnical Project, Environmental Project
Puncture Resistance, Impact Resistance, Tear Resistance
HDPE
Black
HDPE Geomembrane Pond Liner
Landfill Underground Waterproof Membrane
HDPE Geomembrane Waterproof Liner
Waterproof Projects
Pond Smooth Surface HDPE Liners
Black Smooth HDPE Geomembrane
Black White Blue Green (Customized)
HDPE LDPE LLDPE PVC PE
50m-200m/Roll (as Request)
0.2-12m
500m2
5-50 Years
Freely
ASTM Gri-GM13
OBOR
Container
thickness: 0.2-3.0mm, width: 1-12m, smooth
Taian, Shandong, China
3920109090
Product Description
OBOR HDPE Geomembrane Pond Liner for Fish and Shrimp farming
Description ·HDPE geomembrane is produced from high density polyethylene resin by film-blowing process, adding carbon black, antioxidant, anti-aging and UV-resistance component.
·It is the most widely used products for solid waste containment (such as landfill liners), mining and water containment applications.
| Thickness | 0.2mm,0.3mm,0.5mm,0.75mm,1.0mm,1.5mm,2.0mm,3.0mm, 4.0mm |
| Material | HDPE, LDPE, LLDPE |
| Color | Black, White, Blue, Green |
| Length | 50m-200m/ roll or as required |
| Width | Smooth surface 1m-8m, Rough surface 4m-8m |
| Surface | smooth surface, single surface textured, dual surfaces textured |
| Certification | CE, ISO9001, ISO14001 |
and Shrimp Pond Project
HDPE Geomembrane Technical Parameter - Smooth (GRI GM13)
| Properties | Unit | ASTM standard | Test Range | ||||||||||||
| Mechanical Spec | Thickness | mm | D5199 | 0.20 | 0.25 | 0.30 | 0.40 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 |
| Density | ≥ g/cc | D1505/D792 | 0.94 | ||||||||||||
| Tensile Properties(Each direction) (≥) | D 6693 | ||||||||||||||
| • yield strength | kN/m | Type IV | 4 | 5 | 6 | 8 | 10 | 15 | 18 | 20 | 22 | 30 | 38 | 45 | |
| • break strength | kN/m | 6 | 7 | 9 | 12 | 15 | 22 | 29 | 35 | 42 | 55 | 69 | 82 | ||
| • break elongation | % | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | ||
| Tear Resistance | N | D 1004 | 25 | 30 | 38 | 50 | 62 | 93 | 125 | 156 | 187 | 249 | 311 | 374 | |
| Puncture Resistance | N | D 4833 | 64 | 80 | 96 | 128 | 160 | 240 | 320 | 400 | 480 | 640 | 800 | 960 | |
| Stress Crack Resistance | Hrs | D 5397 | 500 | ||||||||||||
| Carbon Black Content | % | D 1603 | 2.0-3.0 | ||||||||||||
| Carbon Black Dispersion | D 5596 | For 10 different views: 9 in Categories 1 or 2 and 1 in Category 3 | |||||||||||||
| Reference Spec | Oxidative Induction Time (OIT) | min | |||||||||||||
| (a)Standard OIT | D 3895 | 100 | |||||||||||||
| (b)High Pressure OIT | D 5885 | 400 | |||||||||||||
| Oven aging at 85°C(OIT) (≥) | % | D5721 | |||||||||||||
| (a)Standard OIT (min.ave.)-% | D3895 | 55 | |||||||||||||
| (b)High Pressure OIT(min.ave.)-% | D5885 | 80 | |||||||||||||
| UV resistance (OIT) (≥ min) | % | ||||||||||||||
| (a)Standard OIT (min.ave.)-% (%) | D3895 | 50 | |||||||||||||
| (b)High Pressure OIT(min.ave.)-% | D5885 | 50 | |||||||||||||
| Roll size | Dimensional Stability | % | - | ±2 | |||||||||||
| Width | m | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | ||
| Length | m | 1050 | 800 | 700 | 420 | 420 | 280 | 210 | 168 | 140 | 105 | 84 | 70 | ||
| Roll Area | m2 | 8400 | 6400 | 5600 | 3360 | 3360 | 2240 | 1680 | 1344 | 1120 | 840 | 672 | 560 | ||
OBOR Geomembrane Production
Geomembrane Installation
(1) Do not pull too tight, should leave a 1.50% margin for partial sinking and stretching. The slope is laid from top to bottom;
(2) The longitudinal joints of two adjacent frames shall not be on a horizontal line and shall be staggered by more than 1 m;
(3)The longitudinal joint should be 1.50m or more from the dam foot and the bent foot, and should be set on the plane;
(4)When laying the slope, the direction of the film should be basically parallel to the maximum slope line.
(5)Do not pull or harden the geomembrane during installation. Ensure there are no sharp objects, roots or rocks on the base or side walls. Use a spade to clean up and get it as smooth as possible.
Geomembrane Application
Package and Shipping
Geomembrane Welding Machine
FAQ
| 1.Who are you? | We are a professional geosynthetics factory located in Tai'an, Shandong,China and we've been this field since 2006. |
| 2.Is samples available? | We supply free samples for your evaluation. |
| 3.What's your MOQ? | Products can be customized for you, but less quantity will have no advantages in price. |
| 4.How can I make the payment? | 30% deposit by T/T after confirmation of order, and the balance paid before shipment |
| 5.What's the delivery time? | If for a 20'container quantity, the geomembrane will be finished within a week. |
Services and Certificates
About OBOR
·OBOR is a professional company that integrates the production and sales of geosynthetics. The company has strong strength, advanced equipment, complete varieties, to ensure our products and the stability of products. Products are exported to more than 50 countries overseas.
·In the past few years, through the unremitting efforts of all staff, our company has a total factory area of 100,000 square meters, and a full range of products. Product quality testing is in full compliance with international standards. Companies adhering to the quality first, customer-oriented business philosophy, and vigorously improve quality and improve corporate visibility.
· The main products are HDPE / LDPE Geomembrane,Plastic Grass Grids, Woven/nonwoven Geotextile, Drainage Board, Composite Membrane and Textile,Plastic netting, 3D Planting Geomat, and other geosynthetic products.
·We are specialized in providing professional geosynthetics solutions for Road, Highway, Railway, Airport, Tunnel, Mine Supporting and Protecting, Hydro, Reinforced Steep Slopes, Reinforced Retaining Wall, Reinforced Embankments, Landfill, Containment, water conservancy facilities, soft foundation treatment and other related projects.
Contact US
Jack Ma
Shandong Obor New Materials Co., Ltd
(Shandong)BMC Industry Co., Ltd
