Audited Supplier
 |  |
| Specification/Model | SF-DW15 | SF-DW12 | SF-DW10 | SF-DW08 |
| Dia of Flute Roller | Ø320mm | Ø290mm | Ø280mm | Ø270mm |
| Working Width | 1400mm-2200mm | 1400mm-2200mm | 1400mm-2200mm | 1400mm-2200mm |
| Max Speed | 150m/min | 120m/min | 100m/min | 80m/min |
| Heating Method | Steam, Electricity, Oil and Natural Gas | |||
- The stationery single facer adopts wind adsorption for paper guide to keep flute stability at high speed.
- The flute paper is adsorbed to the middle flute roller to form a negative pressure zone of 180°and then to finish flute rolling through vacuum box by fan.
- The width of suction slot of lower corrugated roller is not more than 2.0, greatly reducing the stripe mark on single-sided corrugated sheet.
- It adopts universal joint drive to separate the vibration source, which makes the maintainability higher, the transmission more stable and the operation more reliable.
- The gear box adopts oil bath lubrication and closed gear transmission for vibration reduction.
- It adopts auto-cycle glue supply, pneumatic gluing and releasing for better buffering effect.
 |  |
 |  |
 |  |
1. Are you manufacturer or trading company?
We a combination of manufacturer and trading company.
2. What is the payment term you accept?
We usually accept T/T. DP and LC are also ok for us.
We need 30% payment as deposit to arrange production and the balance should be paid before shipping.
3. What is your leading time in average? How much time needs for installation?
The manufacturing period for production line is 150 days since deposit is received and installation period is around 30 days.
4. How do we install and debug machine?
Engineer guides installation and debug machine via video or on site.
5. Where is factory? How can we visit there?
Factory is at Mianfang Road 36, Dongguang County, Cangzhou City, Hebei Province, China.
It is near to Beijing and Tianjin, so after you get Beijing or Tianjin airport, we will pick you up to factory.
