Audited Supplier
JL-D01
Support
12months
Automatic
Beverage
Drinks, Oil, Tea, Dairy Products
Hot Melt Adhesive Labeling Machine
Electric
Automatic Vertical Round Bottle Labeling Machine
1000-1200bph
145-260mm
40-450mm
1500kg
777pack
Wooden Package
2100*1700*1800
Zhangjiagang, China
Product Description
- Easy adjustment for label cutting blade
- Label vacuum drum is made of high hardness material, fold removing programme is set to decrease label friction and avoid the electrostatic.
- The changeover parts work could be finished within 10 minutes.
- The blade operation position can be adjusted accurately and conveniently with the manual operation plate.
- The lower part of the label cutting part and vacuum drum are made of special material resistant to wear and heat prevention
- When the label length changes, the automatic adjustment button can automatically adjust the I-MARK position.
- The cutter and transmission -- adopt a single knife structure. Through the vacuum action of the vacuum pump, absorb the label from the traction part, turn to the cutter to be cut off, and have compressed air to auxiliary blow the subsequent part of the label, and smoothly transfer from the cutter drum to the labeled drum. The mechanical part of this mechanism is strong and durable, and the life of the small noise vibration blade is long.
- Traction and transmission -- The traction roller is driven by the motor, and the traction roller is compacted by the thread. The label is passed by the middle of the pressing roller and the traction roller, and the control system controls the servo motor to achieve the purpose of traction and controlling the length of the label. This organization is stable for the supply of the label.
- glue adhesive and soluble machine -- When working, the cylinder pushes the adhesive mechanism to fit the adhesive roller and the labeling drum, meantime, the glue soluble machine melts the glue to the required state and temperature, Constant pressure (uniform) supplies the adhesive coating mechanism in constant pressure (evenly), the adhesive roller evenly rolls the adhesive on both ends of the label. This mechanism is coated with glue evenly, save the glue.
| Machine name | OPP labeller |
| Model | JL-D01 |
| Main motor power | 1.5KW |
| Controller | Delta |
| Servo motor | Delta 0.75KW |
| PLC | Delta |
| Sensor | Panasonnic |
| Switch power source | Meanwell |
| Inverter | Delta |
| Low-voltage apparatus | Delta |
| Voltage | 380V±10% |
| Frequency | 50HZ |
| Total power | About 7.5KW |
| Labelling type | Single wraparound body label |
| Bottle type suitable | Round bottle dia.145-260mm,height 40-450mm |
| Gluing type | Roll coating (10mm at each end of the label) |
| Label packing type | Rolls |
| Capacity | 1000-1100BPH(15L bottle) |
| Glue consumption | 1kg for 80,000 bottles (label height 50mm) |
| Compressed air pressure | MIN5.0bar MAX8.0bar |
| Compressed air pressure | 0.2M³/minute |
| Machine weight | About 1500kg |
| Machine size | L=2100 W=1700 H=1800 |
By 777PACK Professional Engineering team, the best solution for you is always provided. We pursue the best quality and best service for the customer, feel free to take a look at our factory below:
