Audited Supplier
ENA100
Three Phase Transducer, General Transducer, Single-phase Transducer
Triple
V/F Control Transducer
PWM Control
Voltage
Low Voltage Variable-Frequency Drive
AC-DC-AC Variable-Frequency Drive
Voltage Variable-Frequency Drive
Simple Type, Textile Special, Constant Torque Universal Type
Enc
ENC
Carton/Wood
Shenzhen, China
8504409999
Product Description
Product Description:
ENA100 is a cost-effective general vector inverter with a power range from 0.4kW to 160kW. Built-in macro functions for typical industry applications, greatly facilitate customer operations. Models below 30KW are equipped with a built-in braking unit as standard. Suitable for higher ambient temperature situations.
Typical application industry:
It is suitable for metal processing, plastic machinery, CNC machine tools, printing equipment, printing and dyeing industry, paper making, municipal engineering, water supply engineering, sewage treatment, etc. lt is also widely used in textile,refrigeration, cement, ceramics, stone processing and other fields.
Product advantages:
- Covering sensorless magnetic flux vector control and optimized V/F control, with two modes of speed control and torque control;
- Adopting excellent magnetic flux vector control algorithm, high control precision, fast speed response, and excellent low-frequency characteristics, +0.3% rated synchronous speed (vector control without PG); +1% rated synchronous speed (V/F control)
- Excellent application macro function, can drive synchronous and asynchronous motors, strong environmental adaptability 50°C without derating, support dual keyboard display, local and remote control keyboards can be used at the same time, small size, high cost performance
- Power-on short circuit detection, input and output phase loss protection, over-current protection,under-voltage protection, overheat protection, overload protection, under-load protection, terminal protection, power failure non-stop protection, PlD disconnection protection, water shortage protection.etc.
- Support random carrier function, the motor noise is softer
- No derating required for 50°C ambient temperature in heavy duty mode
ENA100 Performance advantage:
Two-in-one drive
Motor type: can drive both synchronous and asynchronous motors;
One-key switch between synchronous motor and asynchronous motor, convenient for debugging;
Convenient stocking, effectively shorten the cycle of the warehouse;
ENA100 supports both synchronous and asynchronous motors.
Dynamic response:
Torque response:<20ms (without PG quantity control)
Starting torque:1.0Hz, 150% rated torque (V/F control)0.5Hz up to 180% torque (No PG open loop vector)
Control accuracy:±1% rated synchronous speed (V/F control)+0.3% rated synchronous speed (No PG quantity control)
Convenient and practical keyboard:
Support dual keyboard display
Support the simultaneous use of local keyboard and external control keyboard
External control keyboard can realize parameter upload and download function
The local keyboard and external control keyboard of traditional inverter can only one to use.
ENA100 local and external control keyboard can be used simultaneously
Application macro function:
Built-in multiple application macros, only need to set one parameter for different industries.
Structural optimization design:
The difference of power section:
Conventional general series power section :0.4KW~55KW
ENA100 series power section:0.4KW~160KW
Brake unit:
Conventional general series:Three-phase 380V,0.75KW~15KW with built-in brake unit
Three-phase 380V,18.5KW~55KW, optional built- in brake unit
ENA100 series:
Single-phase 220V,0.4KW~2.2KW with built-in brake unit
Three-phase 380V,0.75KW~22KW with built-in brake unit
Three-phase 380V,30KW~160KW, optional external brake unit
No derating at 50ºC and below:
Passed many rigorous tests: salt spray test, high and low temperature impact test, vibration test, ete.
Normal inverter is 30°C, national standard temperature is 40°C, ENA 100 is 50ºC
Product Specification
| Item | Description | ||||
Input | Rating volt, frequency | 1 phase 220VGrade:1 phase 220V50Hz/60Hz 3 phase380VGrade: 3 phase380V50Hz/60Hz | |||
| Allow volt.range | 1 phase 220VGrade: 200~260V 3 phase 380VGrade: 320~460V | ||||
| Output | Voltage | 0~Input voltage | |||
| Frequency | 0~600HZ | ||||
| Over loading capacity | Heayy Load:150% of rated current for l minute:Light Load:120% of rated current for 1 minute. | ||||
| Control PerformaAnalog input channelnce | Control mode | Without PG vector control, open loop V/F control. Without PG torque control, support synchronous and asynchronous motors | |||
| Velocity control precision | +0.3% rated synchronous speed(vector control); +1% rated synchronous speed(V/F control); | ||||
| Speed regulation range | 1:100(Without PG vector control) 1:50(V/F control) | ||||
| Start-up torque | 1.0Hz: 150% rated torque (V/F control); 0.5Hz:150% rated torque (Without PG vector control); | ||||
| Speed fluctuation | +0.3% rated synchronous speed (Without PG vector control, Without PG torque control); (Without PG vector control) | ||||
| Torque response | ≤20ms(Without PG vector control) | ||||
| Frequency precision | Digital setting: max.Frequency×±0.01%; Analog setting:max.frequency×±0.5% | ||||
| Frequency resolution | Analog setting | 0.1% of max.frequency | |||
| Digital setting precision | 0.01Hz | ||||
| Exterior impulse | 0.1% of max.frequency | ||||
| Torque boost | Automatic torque boost;manual torque boost 0.1~12.0% | ||||
| V/F curve(volt. Frequency characteristic) | Setting rated frequency at the range of 5~600Hz, by choosing constanttorque, degressive torque l, degressive torque 2, degressive torque3, self-defined V/F total 5 kinds of curve. | ||||
| Acceleration Deceleration curve | Two methods: linear acceleration and deceleration and S curve accelerationand deceleration; 15 kinds of acceleration and deceleration time, time unit(0.01s.0.1s.1s) | ||||
| Brake | Power consumption brake | ENA100 series three-phase 22KW and below power section has built-in braking unit, only need to add braking resistor between (+)and PB; 30KW and above can connectexternal braking unit between (+) and (-)to achieve Energy consumption braking. | |||
| DC brake | Start, stop action for option, action frequency 0~15Hz, action current 0~100% of ratedcurrent, action time 0~30.0s | ||||
| Jog | Jog frequency range:0Hz~up limit frequency ; jog acceleration and deceleration time 0.1~6000.0 seconds for setting. | ||||
| Multi-section speed run | Realized by inbuilt PLC or control terminal; with 15 section speed, each section speed with separately acceleration and deceleration time; with inbuilt PLC can achieve reserve when power down. | ||||
| Built-in PID controller | Convenient to make closed-loop control system | ||||
| Automatic energy saving run | Optimize V/F curve automatically to achieve power saving run according to the load status. | ||||
Control performance | Automatic voltage regulate(AVR) | Automatically keep output voltage constant, when the power grid voltage fluctuation |
| Automatic current limiting | Current limited automatically under run mode in avoid of inverter over-current frequently to trip | |
| Carrier modulation | Make rotating motor smoothly start without shocking | |
| Speed tracking restart | Make rotating motor smoothly start without shocking | |
| Running function | Running command specifed channel | Keypad specified, control terminal specifed, communication specifed can switch through various means |
| Running frequency specified channel | Main & auxiliary specifed to a realize one main adjusting and one fine control. Digital specifed, analog specified, pulse specifed, pulse width specifed, communication specifed and others, which can be switched by many means at any time. | |
| Binding function | Run command channel and frequency specified channel can bind together randomly and switch synchronously | |
| Input and output characteristics | Digital input channel | 5 general-purpose digital input channels, the maximum frequency is lKHz, one of which can be used as a pulse input channel, the maximum input is 20KHz |
| Analog input channel | 2 analog input channels, of which All is 0~10V output, AI2 channel is 0~20mA or 0~10V input optional. | |
| Pulse output channel | 0.1 ~20KHz pulse square signal output to achieve setting frequency, output frequency andother physical quantity output. | |
| Analog output channel | 1 analog signal output, AOl channel can choose 0~20mA or 0~10V to realize the output of physical quantities such as set frequency and output frequency | |
| Digital output | 2 Y outputs, Y2 can achieve the highest frequency output of 20K, 1 Rel output | |
| Unique function | Rapid current limit | Limit inverter over current to the greatest point, and make it run more stably |
| Monopulse control | Suitable for working site where need one button to control inverter start and stop,first press to start, then press to stop, and that cycle repeats. Its very simple and reliable. | |
| Fixed length control | Realize fxed length control | |
| Timing control | Timing control function: setting time range 0.1Min~6500.0 Min | |
| Virtual terminal | Five group virtual input & output lO can realize simply logical control | |
| Operation keyboard | Keyboard display | The parameters as setting frequency, output frequency, output voltage, output current canbe displayed |
| Button locked | Lock all or part ofthe buttons | |
| Dual keyboard control | Can use external keyboard to achieve dual keyboard control (local and remote control) | |
| Dual keyboard control | Motor power on Shot circuit test, input & output phase loss protection, over-currentprotection, over voltage protection, under voltage protection, over heat protection,overload protection, under load protection, relay absorption protection, terminalprotection and no stop protection under power of. | |
| Ambient | Application site | Indoor, not bare to sunlight, no dust, no corrosive gas, no flammable gas, no vapor, nowater drop or salt etc. |
| Altitude | Under 1000 meter. (above 1000 meter require to reduce volume to use, output currentreduce about 10% of rated current volt per 1000 meter high) | |
| Environment temperature | -10ºC~+50ºC | |
| Environment humidity | Smaller than 95%RH, no drop condenses | |
| Vibration | Smaller than 5.9 M/S2(0.6g) | |
| Storage temperature | -40ºC~+70ºC | |
| Structure | Protection grade | IP20 |
| Cooling mode | Forced air cooling and natural | |
| Installation mode | Wall hanging and cabinet installation | |
