Audited Supplier
UP-5004A
One Year Warranty, Lifetime Maintenance
One Year Warranty, Lifetime Maintenance
Material Testing Machine
<1000KN
0.5
Electronic Load
Static Load
Digital or PLC
Manual Control
0-100Kg
AC220V
Professional Export Packaging
China
9031809090
Product Description
UP-6181A Full Automatic Melt Flow Rate Tester
Product introduction:
This high-precision melt flow rate tester is used to measure the MFR / MVR value of various plastics and resins passing through a certain temperature and load in the viscous state every 10 minutes. It is suitable for polycarbonate, polysulfone, fluoroplastic, nylon and other engineering plastics with high melting temperature, as well as polyethylene (PE), polystyrene (PS), polypropylene (P P) ABS resin, POM, PC resin and other plastics with low melting temperature are widely used in plastic production, plastic products, petrochemical and other industries, as well as relevant colleges, research institutions and commodity inspection departments.
Standards:
GB/T3682-2018:Measurement of melt flow rate and melt volume flow rate of thermoplastic
ISO 1133:1997:Measurement of MFR and MVR of thermoplastic melt
ASTM D1238:Standard Test Method for melt flow rate of thermoplastics by extrusion plastometer
Product characteristics:
1. Multi stage (2-stage) temperature control mode, 2 groups of platinum resistance sensors, 2 heating sleeves for individual temperature control, high-precision intelligent PID control, temperature rise slope, namely, adjustable temperature rise speed
2. The temperature resolution is 0.1 ºC, the temperature uniformity is 0.2 ºC, the temperature fluctuation within 24 hours is not more than 0.5 ºC, and the resolution of displacement sensor is 0.001mm.
3. Over temperature protection device
4. The manual and automatic cutting is integrated, and the cutting time (0 ~ 999) and cutting times (0 ~ 999) can be set arbitrarily
5. The mass method, the volume method, or both methods can be used in the test, and the flow rate ratio can be calculated. Both methods start the test when the piston rod moves to a certain position.
6. Built in temperature stability prompt alarm, and add 240 seconds (gb3682) material preheating second countdown. After the countdown, the prompt tone will be given, and American Standard (ASTM) preheating time can also be set.
7. Built in multiple plastic material melt index test conditions, convenient for customers to use at any time, reduce tedious workload, and store the last test conditions and results
8. Built in micro printer for printing test data
9. High precision touch screen controller, 7-inch touch screen, which can store and print the latest test conditions and data. The setting of test printing menu includes test time (system default), operator, material name, test method, test condition (temperature, weight of weight, cutting time interval), test result data, test result data, and human judgment OK or ng, etc,
10. RS232 interface or USB interface shall be reserved to connect the computer, which can control instrument operation and transfer test data to the computer,
11. Set the required weight load in the screen, and the instrument department will select and load the corresponding weight by itself, without manual loading or pin type selection of weight, so as to reduce the workload. After the test, it rises by itself
Main technical parameters:
Temperature range: 40 ºC - 450 ºC
Temperature drift: 4 hours ≤ 0.5 ºC
Temperature fluctuation: ± 0.2 ºC
Temperature uniformity of 10 mm-70 mm above the die: ± 1 ºC
Temperature display resolution: 0.1 ºC
Time display resolution: 0.1s
Cutting timing range: 1-999s adjustable
Die diameter: Φ 2.095 ± 0.005mm (half die 1.05mm + 0.005, optional)
Outlet length: 8.000 ± 0.025mm
Piston rod diameter: 9.474 ± 0.007mm
Length of piston rod: 6.35 ± 0.13MM
Loading barrel diameter: Φ 9.550 ± 0.007mm
Test range: 0.1-150g/10min
Weight accuracy: ± 0.5%
Output mode: micro automatic print output
Cutting mode: manual and automatic cutting
Test load: 8 levels in total, 8 sets of weights
Power supply voltage: AC220V ± 10% 50Hz
Configuration list:
Product introduction:
This high-precision melt flow rate tester is used to measure the MFR / MVR value of various plastics and resins passing through a certain temperature and load in the viscous state every 10 minutes. It is suitable for polycarbonate, polysulfone, fluoroplastic, nylon and other engineering plastics with high melting temperature, as well as polyethylene (PE), polystyrene (PS), polypropylene (P P) ABS resin, POM, PC resin and other plastics with low melting temperature are widely used in plastic production, plastic products, petrochemical and other industries, as well as relevant colleges, research institutions and commodity inspection departments.
Standards:
GB/T3682-2018:Measurement of melt flow rate and melt volume flow rate of thermoplastic
ISO 1133:1997:Measurement of MFR and MVR of thermoplastic melt
ASTM D1238:Standard Test Method for melt flow rate of thermoplastics by extrusion plastometer
Product characteristics:
1. Multi stage (2-stage) temperature control mode, 2 groups of platinum resistance sensors, 2 heating sleeves for individual temperature control, high-precision intelligent PID control, temperature rise slope, namely, adjustable temperature rise speed
2. The temperature resolution is 0.1 ºC, the temperature uniformity is 0.2 ºC, the temperature fluctuation within 24 hours is not more than 0.5 ºC, and the resolution of displacement sensor is 0.001mm.
3. Over temperature protection device
4. The manual and automatic cutting is integrated, and the cutting time (0 ~ 999) and cutting times (0 ~ 999) can be set arbitrarily
5. The mass method, the volume method, or both methods can be used in the test, and the flow rate ratio can be calculated. Both methods start the test when the piston rod moves to a certain position.
6. Built in temperature stability prompt alarm, and add 240 seconds (gb3682) material preheating second countdown. After the countdown, the prompt tone will be given, and American Standard (ASTM) preheating time can also be set.
7. Built in multiple plastic material melt index test conditions, convenient for customers to use at any time, reduce tedious workload, and store the last test conditions and results
8. Built in micro printer for printing test data
9. High precision touch screen controller, 7-inch touch screen, which can store and print the latest test conditions and data. The setting of test printing menu includes test time (system default), operator, material name, test method, test condition (temperature, weight of weight, cutting time interval), test result data, test result data, and human judgment OK or ng, etc,
10. RS232 interface or USB interface shall be reserved to connect the computer, which can control instrument operation and transfer test data to the computer,
11. Set the required weight load in the screen, and the instrument department will select and load the corresponding weight by itself, without manual loading or pin type selection of weight, so as to reduce the workload. After the test, it rises by itself
Main technical parameters:
Temperature range: 40 ºC - 450 ºC
Temperature drift: 4 hours ≤ 0.5 ºC
Temperature fluctuation: ± 0.2 ºC
Temperature uniformity of 10 mm-70 mm above the die: ± 1 ºC
Temperature display resolution: 0.1 ºC
Time display resolution: 0.1s
Cutting timing range: 1-999s adjustable
Die diameter: Φ 2.095 ± 0.005mm (half die 1.05mm + 0.005, optional)
Outlet length: 8.000 ± 0.025mm
Piston rod diameter: 9.474 ± 0.007mm
Length of piston rod: 6.35 ± 0.13MM
Loading barrel diameter: Φ 9.550 ± 0.007mm
Test range: 0.1-150g/10min
Weight accuracy: ± 0.5%
Output mode: micro automatic print output
Cutting mode: manual and automatic cutting
Test load: 8 levels in total, 8 sets of weights
Power supply voltage: AC220V ± 10% 50Hz
Configuration list:
| No. | Name | Qty | Remarks |
| 1 | Machine | 1 | Printer included |
| 2 | Weights | 1 Set,8 levels:0.325 kg,1.200 kg,2.160 kg,3.800 kg,5.000 kg,10.000 kg,12.000 kg,21.600 kg | (1# Within level 1 load) |
| 3 | Weight pallet | 1 | Within level 1 load |
| 4 | Piston rod | 1 | Within level 1 load |
| 5 | Die | 1 | Tungsten carbide |
| 6 | Charging hopper | 1 | Stainless steel |
| 7 | Charging rod | 1 | |
| 8 | Barrel cleaning rod | 1 | |
| 9 | Die cleaning rod | 1 | Stainless steel |
| 10 | Gauze | 2 | |
| 11 | Printing paper | 2 | |
| 12 | Others | Factory certificate, instruction, discharge tray | |
Our service:
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm.
Then quote the most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.
3)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show the production process.
After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products is confirmed shipping time and inform the customer.
4)Installation and after-sale service:
Defines installing those products in the field and providing after-sales support.
FAQ:
1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?
Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment... in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.
Moreover, If your machine doesn't work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.
2. What about the delivery term?
For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days;
If there is no stock, normally, the delivery time is 15-20 working days after payment received;
If you are in urgent need, we will make a special arrangement for you.
3. Do you accept customization services? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.
4. How can I install and use the machine?
Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email.
Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it. And if it's necessary, we can also assist you to install your machine on site.
