Gold Diamond Gemstone Tin Copper Magnet Iron Heavy Sea Mineral Quartz Silica Sand/Feldspar/Kaolin/Nepheline Lithium Ore Chrome Mine Process Separate Wash Plant

Gold Diamond gemstone tin copper magnet iron heavy sea mineral Quartz Silica Sand/Feldspar/Kaolin/Nepheline Lithium ore chrome mine process separate wash Plant 

 
Our factory produce full sets mining equipments for rock Cassiterite, Tungsten, Tantalum, Niobium, Titanium iron ore processing, such as trommel screen, vibrating screen, jaw crusher, cone crusher, ball mill, spiral classifier, shaking table, spiral separator, magnetic separator, high tension electrostatic separator, vibrating feeder, and so on.
We also produce washing trommel, rotary scrubber, jigger machine, sluice box, amalgamation, mercury retort, smelting furnace for gold diamond washing and separating.
The equipments details as below,
Washing Trommel:
Specification:

Rotary Scrubber:
Technical data of Rotary scrubber trommel:

Jaw Crusher
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, rock crushing, metall-urgical industry, building material, highway, railway, and chemical industry.
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Technical Data of Big Jaw Crusher:

Ball mill
Ball mill is the key re-crush eqipment after the crushing. Ball mill is widely used in cement, silicate products, new building materials, refractories, chemical fertilizer, black and non-ferrous metal ore-dressing, as well as the production industry of glass or ceramics, for carry though dry or wet grinding of a variety ores and other materials.
Technical Data:

Shaking table
Gravity equipment to separate out different minerals as per the minerals' different density. It is friendly to the earth and there is no any polution.

Magnetic Separator
Our factory professional produce different type magnetic separator over 30 years.
The products includes dry type magnetic separator, wet type magnetic separator. Magnetic field intensity from 800 gauss up to 20000 gauss.

Our magnetic separator sells well in Vietnam, Philippines, Indonesia, India, Iran, Chile, Peru, Africa etc.
Which are widely used for separate magnetic iron ore, ilmenite, titanium ore, hematile, manganese, cobalt, cassiterite, coltan, tantalum, niobium, zircon sand, beach black sands, silica purify sand and so on.

***Dry Type Magnetic Separator
Our factory produce one roller, two rollers, three rollers, four rollers dry type high intensity magnetic separator and low intensity magnetic separator, magnetic field intensity from 800 gauss to 20000 gauss.
The information as below,

1). Three rollers high intensity magnetic separator:2). Two rollers high intensity magnetic separator:
3). One roller low intensity magnetic separator / One roller high intensity magnetic separator:
***Wet Type Magnetic Separator

1). Iron ore, Ilmenite ore(Titanium ore) magnetic separator, Monazite ore magnetic separator

Wet Drum Permanent Magnetic Separator is suitable for Mine, Coal preparation plant etc. use weak wet magnetic field to sort out the strong magnetic ore, or eliminating the strong magnetic minerals mixed in nonmagnetic minerals. The magnetic field of CTS(N,B) wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.

When the ore pulp entering magnetic field area, the ferromagnetic materials are sucked up on the surface of the drum, weak magnetic substance and nonmagnetic minerals are washed away by water, the absorbed magnetic minerals on the surface of drum are rotated with the drum and taken out of magnetic field area .The rotary one is suitable to dry separate the fine particle strong magnetic ore, because of speedy rotation, the magnetic particle rolling more times than other magnetic separator, which is effectively destroy the reunite of magnetic and arise the high-grade ore, the ore are divide into magnetic and nonmagnetic after separation, and discharge from the own road. This machine is suitable for the roughing and cleaning of particle size in 6-0mm size.
 
This machine has three kinds of tank: CTB, CTS and CTN, the same kind of drum could match those three tanks, to suitable different separation work and different requirement:       

• CTS is suitable for the roughing and cleaning of particle size in 6-0mm;
• CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and it is often applied to recycle heavy medium in coal;
• CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0mm.

This wet drum permanent magnetic separator can continuously feeding ores and discharge ores ,with large magnetic field intensity, high magnetic field gradient, big working clearance, higher processing ability and little magnetic flux leakage, low energy consumption, fine beneficiating results, simple structure and easy to maintain. 

***18000GS-20000GS Three discs electromagnetic separator( 3 PC disc magnetic separator)

Three-disc electromagnetic separator is sorting mineral size less than 2-3mm of weakly magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. Three-disc electrmagnetic separator have 3 models.
 Three-disc electromagnetic separator is for a variety of strong magnetic minerals mixed ore separation, according to the difference of magnetic minerals, can achieving efficient separation of minerals can form different intensity magnetic disk by adjusting the excitation current levels, can also be adjusted each level disk and sensing distance between dressing grain is to get different magnetic induction intensity, reaching a one-time separation of various minerals. This device is widely used in ilmenite, monazite, tungsten, tin, tantalum, iron ore and other minerals with magnetic and non-magnetic dry sorting.
 Features:
The equipment have reasonable structure, small footprint, simple operation and maintenance, its one-time separate variety of ferromagnetic minerals, weakly magnetic, non-magnetic and so on. Operations can be adapted to water-lack mines.
 Product Structure:
The following major structural for diagram 600mm Double-disc Dry strong magnetic separator to do next explain. Main part of the separator by the "mountain" shaped magnetic system, magnetic system suspended above the rotating disk and vibration slots (or belt) components.

 

 

--- PRE-SALE SERVICE ---

1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.

--- AFTER-SALE SERVICE ---

1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
        1) Installation & debug of the machinery
        2) Train the first-line operators & technical personnel
        3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term

--- ONE STOP SOLUTION ---

1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
 

 

Q1: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?

Q2: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

Q3: How long is the warrenty of your equipments? Does your company supply the spare parts?

A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q4: If i need the complete mineral processing line. is Gelin able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.

We will be honored by your arrival!!!