Compact 3 in 1 Decoiler Straightener Feeder for Progressive Die Stamping

^{3 in 1 is a combined machine which combines decoiler, straightener and feeder together. It is specially designed for the producing of wide material and material with high yield strength. The feeding rollers and straightening rollers of the equipment are specially treated with high hardness, wear resistance and long service life. The surface of the rollers is treated with hard chromium plating to increase the surface smoothness of the roller. Some special materials are sandblasted to ensure the feeding accuracy will not be affected due to slipping during the feeding process; a new type of automatic oiling device (optional) is equipped at the output, and the oiling rollers are wool felt, which is conducive to the protection of the material surface and even mixing of the oil layer. Adopt the Japanese servo motor to ensure high-precision feeding; the operation panel adopts the color LCD, large-scale touch screen, high-definition operation picture, cooperate with the operation safety protection system, even the green users can operate safely; the perfect operation system humanized design shortens the preparation work. The advanced automatic diagnosis system helps the operator quickly control the performance of the machine; the design concept of enhancing the safety factor makes the safe service life of the equipment longer.}

^{Hunan Qinfeng Robot Corporation Limited is a manufacturer that provides one-stop stamping automation solution. Except press machine, we make all other equipment including stamping manipulators, stamping robots, 3 in 1 decoiler straightener feeder, destacker, 3D transfer manipulator, independent transfer manipulator, one bar transfer manipulator, progressive die, single mold and stamped products. Besides producing the machinery, we provide whole solution plan including solution proposal, Cad layout & 3D simulation, production, installation and debugging. After installation, we will provide training service to your technicians. We make 4000-5000 stamping manipulators / robots, more than 500 sets of 3 in 1 decoiler straightener feeder, hundreds of 3D transfer manipulators yearly.
With self-developed software special for stamping automation, our stamping manipulator is very easy to operate. For a person without related experice, he/she can learn basic operation within 7 days.}

1 The upper 4 and lower 4 roller structure is better than the general upper 4 and lower 3 roller structure, and the flatness is easier to adjust. The fifth roller is a movable eccentric roller, which is convenient to adjust the feeding direction of the coil, and provides users with more security.
2 Leveling roller and feeding roller are solid rollers. High-quality bearing steel is selected as raw material. After heat treatment and quenching HRC 60 °, hard chromium plating and grinding twice, the rollers are with high hardness, wear resistance and long service life. High precision roller ensures material stress relief and leveling.
3 Anti roll function of decoiler: anti roll function is added to the decoiler to prevent opposite winding of material when the coil is nearly used.
4 Both the side plate and the tile are all made of steel plate. The cast iron and even cast steel structure usually used in the industry is not selected to prevent the screw teeth from deforming and damaging during the maintenance and disassembly after the screw is glued, or the tile and the head are damaged due to collision.
5 Observation hole: the observation hole of material head is reserved, which is convenient for the operator to observe the position of material head, so as to prevent the material head from suffocating and being difficult to take out due to the over-pressure jam caused by the unskilled operation.
6 Feeding roller: after long-term experience accumulation, the structure of feeding roller is subversive, more stable, convenient, without any sequelae.
7 Tile structure: the tile is made of diameter 508 seamless steel pipe, which ensures the uniformity of inner circle and prevents the inner ring deformation caused by linear contact when the material is used to the inner ring, resulting in waste
8 Discharge roller: it adopts the retractable structure to facilitate the switching of moulds with different lengths, and extends the roller to the entrance of the mould as far as possible
9 The appearance of each machine is fine and the sheet metal is bent and processed as much as possible to avoid welding. With reasonable design, the sheet metal is treated with baking paint and beautiful color, and the paint color can be changed according to the needs of customers to match main machine color. Improve your company's image and influence.
10 Wireless remote control handle is used for trolley and mold adjusting handle to avoid the trouble of dragging wire, which makes the site clean and beautiful.
 

1. Q: Are you a factory or trading company?
A: We are a factory.

2. Q: Where is your factory located? How can I visit your factory?
A: We are located in Huarong, Yueyang, Hunan. You can take high speed train to Yueyang station or fly to Yueyang airport. We will pick you up from Yueyang station or airport. It's about 1 hour by car from our factory to Yueyang station or airport.

3. Q: What kinds of machines do you make?
A: we make all other equipment including stamping manipulators, stamping robots, 3 in 1 decoiler straightener feeder, destacker, 3D transfer manipulator, independent transfer manipulator, one bar transfer manipulator, progressive die, single mold and stamped products.

4. Q: Is your machinery standard or customized?
A: Both. Most machinery are standard models. If standard models can't meet your personal needs, we can customize as per your personal needs.

5. Q: How does your factory's quality system work?
A: QUALITY IS PRIORITY. We check all machines parts before installation and all machines will be tested before shipment.

7. Q: How long is the warranty of the machine?
A: The warranty is one year. With good maintenace, the machines can be used more than 10 years.

8. Q: Do you have after sales service?
A:Yes, we have some overseas service partners that can provide on-site after-sales service. In those countries we haven't had service team, we are happy to provide support through mail, visual phone and etc.

9. Q: Is it possible to be a foreign agent and distributor?
A: Yes. We welcome you to be our agent or distribtor if you have sales and after-sales service team with rich experience in the stamping industry.

10. Q: Can you OEM for the 3 in 1 decoiler straightener feeder?
A: Yes, we can make the 3 in 1 decoiler straightener feeder with your own brand.