Audited Supplier
QF-MD-1400 intelligent joint stamping manipulator
Suitable for press machines within tonnage of 350T and the press center distance within 2.8m.
The size of the grabbed product is recommended to be within 800*800 mm.
Suitable for the stamping site of small electronic products, home appliance parts and mechanical parts.
At the same time, it is suitable for the palletizing and depalletizing of common sheet materials.
| Model | QF-MD-1400/QF-DY-1410 | |
| Parameter | Unit | Index |
| Voltage | V | AC 220 |
| Power frequency | Hz | 50/60 |
| Power | KW | 4 |
| Working temperature | ºC | -20~45 |
| Relative humidity of working environment | % | 20~80 |
| Max. working radius | mm | 1400 |
| Min. working radius | mm | 350 |
| Max. precision repeatability | mm | ±0.1 |
| Payload | kg | ≤10 |
| The max. range of each joint movement | degree | J1±160 |
| degree | J2+75, -35 | |
| degree | J3+75, -25 | |
| degree | J4±300 | |
| degree | J5±180 (not applicable for 4-axis) | |
| The max. speed of each joint movement | /S | J1 152.5 |
| /S | J2 148.7 | |
| /S | J3 191.4 | |
| /S | J4 360 | |
| /S | J5 180 (not applicable for 4-axis) | |
| Robot weight | kg | ≈275 |
Hunan Qinfeng Robot Corporation Limited is a manufacturer that provides one-stop stamping automation solution. Except press machine, we make all other equipment including stamping manipulators, stamping robots, 3 in 1 decoiler straightener feeder, destacker, 3D transfer manipulator, independent transfer manipulator, one bar transfer manipulator, progressive die, single mold and stamped products. Besides producing the machinery, we provide whole solution plan including solution proposal, Cad layout & 3D simulation, production, installation and debugging. After installation, we will provide training service to your technicians. We make 4000-5000 stamping manipulators / robots, more than 500 sets of 3 in 1 decoiler straightener feeder, hundreds of 3D transfer manipulators yearly.
With self-developed software special for stamping automation, our stamping manipulator is very easy to operate. For a person without related experice, he/she can learn basic operation within 7 days.
Flexibility - Can be moved arbitrarily and applied for series products with similar weight
Compatibility - Can be used for pneumatic punch, gear punch, hydraulic press, hot forging and etc.
Stability - Continuous research and development and improvement since our invention in 2006.
Easy use - With our specially designed software for stamping, no programming needed.
Safety - If one robot fails to pick or load, the line will alarm and stop.
Reliablity - All robots finished 100,000 tests in factory before shipping.
Economy - With mass production of 5000 sets yearly, the robot is cost-effective.
Standardization - Each robot is a standard machine. Just use different grippers.
1. Q: Are you a factory or trading company?
A: We are a factory.
2. Q: Where is your factory located? How can I visit your factory?
A: We are located in Huarong, Yueyang, Hunan. You can take high speed train to Yueyang station or fly to Yueyang airport. We will pick you up from Yueyang station or airport. It's about 1 hour by car from our factory to Yueyang station or airport.
3. Q: What kinds of machines do you make?
A: we make all other equipment including stamping manipulators, stamping robots, 3 in 1 decoiler straightener feeder, destacker, 3D transfer manipulator, independent transfer manipulator, one bar transfer manipulator, progressive die, single mold and stamped products.
4. Q: Is your machinery standard or customized?
A: Both. Most machinery are standard models. If standard models can't meet your personal needs, we can customize as per your personal needs.
5. Q: How does your factory's quality system work?
A: QUALITY IS PRIORITY. We check all machines parts before installation and all machines will be tested before shipment.
7. Q: How long is the warranty of the machine?
A: The warranty is one year. With good maintenace, the machines can be used more than 10 years.
8. Q: Do you have after sales service?
A:Yes, we have some overseas service partners that can provide on-site after-sales service. In those countries we haven't had service team, we are happy to provide support through mail, visual phone and etc.
9. Q: Is it possible to be a foreign agent and distributor?
A: Yes. We welcome you to be our agent or distribtor if you have sales and after-sales service team with rich experience in the stamping industry.
