Audited Supplier
Customized size
Uncoated
Straight Tooth
Dense Tooth
Insert Type
Tungsten Carbide
Side Milling Cutter
Yg6, Yg8, Yg10, Yg15, Yt14, Yt05, Yt15, Ys2t
85-92hra
14-14.9g/cm3
2800-3000MPa
Micron Fine, Fine, Medium, Coarse
OEM
by Carton/Pallet
Per client
Hunan, China
8208101900
Product Description
There are several shapes for customers choice.
- Woodworking carbide hinge boring bits are used to drill the pockets for European style hinges such as Blum and Hafele. Carbide tipped for maximum tool life. Cutting diameters from 15mm to 60mm. 57mm and 70mm lengths. Available in both right and left rotation. Specification as below:
| Order No. | Drill Dia | Shank Length | Total Length | Rotation |
| JC15K3057RH01/LH01 | 15 | 30 | 57 | R/L |
| JC15K3070RH01/LH01 | 15 | 30 | 70 | R/L |
| JC16K3057RH01/LH01 | 16 | 30 | 57 | R/L |
| JC16K3070RH01/LH01 | 16 | 30 | 70 | R/L |
| JC17K3070RH01/LH01 | 17 | 30 | 70 | R/L |
| JC18K3070LH01/LH01 | 18 | 30 | 70 | R/L |
| JC19K3070RH01/LH01 | 19 | 30 | 70 | R/L |
| JC20K3057RH01/LH01 | 20 | 30 | 57 | R/L |
| JC20K3070RH01/LH01 | 20 | 30 | 70 | R/L |
- Woodworking V-Point Through Hole Drill Bits: this is a special high angle tip used on drill bits for automated wood boring machines. V-point drills are used to create thru-holes in sheet stock for dowels or other assembly hardware. Through hole bits are used for locks, door knobs, wiring holes, etc. Specification as below:
| Model No. | Drill Dia | Shank Length | Total Length | Rotation |
| JC03K2057RVT1/LVT1 | 3 | 20 | 57 | R/L |
| JC03K2070RVT1/LVT1 | 3 | 20 | 70 | R/L |
| JC04K2057RVT1/LVT1 | 4 | 20 | 57 | R/L |
| JC04K2070RVT1/LVT1 | 4 | 20 | 70 | R/L |
| JC05K2057RVT1/LVT1 | 5 | 20 | 57 | R/L |
| JC05K2070RVT1/LVT1 | 5 | 20 | 70 | R/L |
| JC06K2057RVT1/LVT1 | 6 | 20 | 57 | R/L |
| JC06K2070RVT1/LVT1 | 6 | 20 | 70 | R/L |
- Woodworking V-Point Through Hole Drill Bits: this is a special high angle tip used on drill bits for automated wood boring machines. V-point drills are used to create thru-holes in sheet stock for dowels or other assembly hardware. Through hole bits are used for locks, door knobs, wiring holes, etc. Specification as below:
| Model No. | Drill Dia | Shank Length | Total Length | Rotation |
| JC03K2057RVT1/LVT1 | 3 | 20 | 57 | R/L |
| JC03K2070RVT1/LVT1 | 3 | 20 | 70 | R/L |
| JC04K2057RVT1/LVT1 | 4 | 20 | 57 | R/L |
| JC04K2070RVT1/LVT1 | 4 | 20 | 70 | R/L |
| JC05K2057RVT1/LVT1 | 5 | 20 | 57 | R/L |
| JC05K2070RVT1/LVT1 | 5 | 20 | 70 | R/L |
| JC06K2057RVT1/LVT1 | 6 | 20 | 57 | R/L |
| JC06K2070RVT1/LVT1 | 6 | 20 | 70 | R/L |
Grade for Carbide Brazed Tips:
| ISO Code | Grade | Physical and mechanical properties | Application | ||
| Density g/cm³ | Hardness HRA | TRS Mpa | |||
| P10 | YT05 | 12.6 | 92.5 | 1260 | It is suitable for finishing steel and casting steel machining, high cutting speed, low feed rate, and low depth are recommended. |
| YT15 | 11.3 | 91 | 1300 | It is suitable for the semi-finishing of steel and casting steel machining, high cutting speed and medium feed rate are recommended. | |
| P20 | YC201 | 11.79 | 91.8 | 1400 | It is suitable for semi-finishing and light roughing machining of steel, casting steel, and stainless steel. It is a suitable grade for a wide application. |
| YT14 | 11.4 | 90.5 | 1400 | It is suitable for the semi-finishing of steel and casting steel. | |
| P30 | YT5 | 12.8 | 89.5 | 1570 | Suitable for the heavy-duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions |
| P40 | YC40 | 13.15 | 89.5 | 1650 | It is suitable for the heavy-duty turning of steel and also for semi-finishing and light roughing of stainless steel and alloy steel. |
| YC45 | 12.75 | 90 | 2250 | Suitable for the heavy-duty turning of steel and cast steel with a big feed rate and also for face milling. | |
| K05 | YG3X | 15.1 | 91.5 | 1300 | It is suitable for finishing casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. |
| YG3 | 15 | 90.5 | 1300 | It is suitable for semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. | |
| K10 | YM201 | 13.9 | 93.0 | 1600 | It is suitable for semi-finishing of Fe, Ni high-temperature alloy, cold hard cast irons, stainless steel with good heat resistance and nonferrous metal. It is a wide application. |
| YG6A | 14.92 | 91 | 1510 | It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy. | |
| YG6X | 14.8 | 91 | 1560 | It is suitable for semi-finishing to light roughing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. | |
| K15 | YD15 | 14.94 | 91 | 1650 | It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy. |
| K20 | YD201 | 14.89 | 91.0 | 1800 | It is suitable for roughing to finishing machining of heat-resistance alloy, Ti alloy, casting iron, and aluminum alloy. |
| YG6 | 14.9 | 89.5 | 1670 | It is suitable for light roughing and semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. | |
| YG8N | 14.6 | 89.5 | 1840 | It is suitable for semi-finishing and roughing of casting iron, nonferrous metal, heat - resistance alloy and Ti alloy at continuous and intermittent machining conditions. | |
| YG8 | 14.6 | 89 | 1840 | It is suitable for semi-finishing and roughing of casting iron, nonferrous metal, heat- resistance alloy and Ti alloy at continuous and intermittent machining conditions. | |
| K30 | YL10.2 | 14.5 | 91 | 2000 | It is suitable for semi-finishing of casting iron, nonferrous metal, stainless steel, heat-resistance alloy, and Ti alloy. |
1.For chip free drilling of dowel holes in solid wood and wood-based panels;
2.Suitable for cutting MDF, HDF, wood, laminates, chipboards, particle, Acrylic, plexiglass, plastic;
3.Portable boring machines.
Advantages:
1) 100% virgin raw material.
2) Customized,We have over 20 years' experience in the shaped tungsten carbide products.
3) Various kinds of material grades are available based on customer's application.
4) we have professional advanced production line and inspection equipment to ensure high quality products.
5) Advanced technology with precision ground and high polishing process.
6) High wear resistance, high hardness and impact toughness.
7) Excellent after-sales service.
FAQ:
We are Factory with 20 years of production experience.
Q2: What is the producing process?
Production process including powder process → formula according to the use requirements → wet grinding → mixing → smash → dry → sieving → add binder → dry again → get the mixture after sieving → pelletize → pressing → forming → sinter-hip → forming (blank) → blanks checking → passivating treatment → cylindrical grinding (according to the customer request) → cleaning → inspection of the finished product → packaging → entering warehouse.
Q3: How to control the products quality?
All products will be tested before bulk production, and we will check the physical properties, shape and tolerance for ensuring qualified products before shipping.
Q4: What is the transportation?
If small quantity , we suggest to send by express, such as DHL,UPS, TNT FEDEX. If with large quantity, suggest to ship by sea.
Q5: Can you provide OEM service?
Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products
Q6: How to place an order for Good performance nonstandard products by stellite alloy?
1. Fill your Order List in our online
Inquiry System (Also you can directly contact our salesperson by E-mail / Skype / Whats App)
2. We will make a feedback to you ASAP after receive your order list.
Q7: What's your delivery time ?
For the normal type which we have mold it takes 7-15 days after receiving the advance payment. For the non standard which we do not have mold it takes 15-35 days after receiving the advance payment.
Q8:How to contact us?
You can Contact me by E-mail, Trademanager, Skype, Mobile, whatsapp and so on
Q4: What is the transportation?
If small quantity , we suggest to send by express, such as DHL,UPS, TNT FEDEX. If with large quantity, suggest to ship by sea.
Q5: Can you provide OEM service?
Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products
Q6: How to place an order for Good performance nonstandard products by stellite alloy?
1. Fill your Order List in our online
Inquiry System (Also you can directly contact our salesperson by E-mail / Skype / Whats App)
2. We will make a feedback to you ASAP after receive your order list.
Q7: What's your delivery time ?
For the normal type which we have mold it takes 7-15 days after receiving the advance payment. For the non standard which we do not have mold it takes 15-35 days after receiving the advance payment.
Q8:How to contact us?
You can Contact me by E-mail, Trademanager, Skype, Mobile, whatsapp and so on
