Audited Supplier
JN-CPM1002
1"-4"
SS304, SS316L
Silicone, EPDM, Viton, PTFE, or NBR
FDA
1PCS
Forging or Casting
LG Mazak CNC Machine
SMS, ISO, as, BS, Bpe, Rjt, 3A, Idf
Manual or Pneumatic or Electrical
Ra 0.5
Ra 0.8
Weld, Clamp, Male, Female, Union, Flange
JONENG
Wooden Case
1/4"-4"
Wenzhou China
8481804090
Product Description
Stainless Steel Laval Lafa Type Food Equipment Cpm Valve (JN-CPM1002)
The CPM valve is used to keep the system in safe pressure. So to avoid of any leaking and explosion problems. When we set the pressure, the CPM valve works to remain the set pressure all the time. As the inlet and valve body is 90 degree, so there is no dead angle. The valve is easy operating and easy maintenance.
Features:
Two type: CPMI-2 or CPMO-2 type
Valve body is made from 12mm steel plate.
Service kit is imported material EPDM/PTFE, which is very very good quality. Nitrile upper and telfon covered EPDM for down parts
Max. Pressure: 10bar
Min. Pressure: 0Bar
Flow Kv, fully open,(p=1ar): Approx 23m3/h
Flow Kv, low capacity (p=1bar): Approx 2m3/h
CPMI-2 valve is to keep inlet pressure constant which are mostly used after separators or heat exchangers
CPM0-2 valve is to keep outlet pressure constant which are mostly used before filling or bottle machines
Uniform inlet or outlet pressure
Fast response
Double diaphragm to ensure better performance
Tangential inlet for complete self-draining
Kv 23 plug to cover a wide range of low capacities
Connection end: welded,clamped
Size: 1"-2.5", DN25-DN65
Material: SS304, SS316L
Surface finish: Sand blasting type
Application: sterilization, filling, bottling, filter, heat exchanging system in Food, beverage, dairy, pharmacy, chemical or any food processing industries
Quality guarantee of 3 years
ISO 9001, FDA, SGS approved materials
7-10 days fast delivery on urgent requirements
10 years' Rich exporting experience to make you easy and happy with custom work
We also supply sanitary butterfly valve, sanitary flow diversion valve, sanitary CPM valve, sanitary regulating control valve, sanitary diaphragm valve, sanitary ball valve, sanitary sampling valve, sanitary safety valve, sanitary pressure reducing valve
sanitary elbow, sanitary tee, sanitary reducers, sanitary unions, sanitary clamp, sanitary ferrule, sanitary pipe clamps,sanitary cleaning ball, sanitary sight glass, sanitary manway manhole cover, sanitary strainer, filters, and other sanitary pipe fittings....
Welcome to check our other products.
3 PMI machines to inspect the chemical for raw materials, semi finished products and final products to avoid mixing issue.
1 nos of roughness machine to check the surface of the products.
OUR PRODUCTION CAPACITY
FAQ:
1. Are you a trading company or factory? We are a manufacturing factory.
2. Do you have FDA certificate for the materials? Yes, FDA is very important for the food processing machines.
3. How do you control the quality?
Quality control is very important to avoid material mixing and poor quality. We control the quality from beginning to the end. We only have 304 and 316L two different materials. 100% inspection on raw materials. During production, different materials in different places. After materials are finished, we choose 10% for inspection. If there is 0.1% problem in 10%, then no excuse to go ahead for inspecting 100% of the materials.
4. About chemical components
This is first concerning for customers. We take our materials to our laboratory for each lot. You may ask for the laboratory report any time.
5. If there is any quality problem, how do you solve it?
We are very proud that we never let one customer leave us. We are not 100% perfect, there is some quality problem. We try our best to provide the correct materials in the beginning, so we need less time for quality problem.
If there is any quality problem, we take the responsibility. We believe what we are doing together, it will get back tomorrow. If we leave our responsibility, customers will leave us. If we always take our responsibility, we keep our customers with us.
6. How long is your delivery time? For normal products in 7-10 days; for bulk order, in 15-25 days. It depends.
7. Warranty
3 years warranty for all of our stainless steel products. Gaskets are not included due to the different application for customers.
8. More questions are appreciated.
The CPM valve is used to keep the system in safe pressure. So to avoid of any leaking and explosion problems. When we set the pressure, the CPM valve works to remain the set pressure all the time. As the inlet and valve body is 90 degree, so there is no dead angle. The valve is easy operating and easy maintenance.
Features:
Two type: CPMI-2 or CPMO-2 type
Valve body is made from 12mm steel plate.
Service kit is imported material EPDM/PTFE, which is very very good quality. Nitrile upper and telfon covered EPDM for down parts
Max. Pressure: 10bar
Min. Pressure: 0Bar
Flow Kv, fully open,(p=1ar): Approx 23m3/h
Flow Kv, low capacity (p=1bar): Approx 2m3/h
CPMI-2 valve is to keep inlet pressure constant which are mostly used after separators or heat exchangers
CPM0-2 valve is to keep outlet pressure constant which are mostly used before filling or bottle machines
Uniform inlet or outlet pressure
Fast response
Double diaphragm to ensure better performance
Tangential inlet for complete self-draining
Kv 23 plug to cover a wide range of low capacities
Connection end: welded,clamped
Size: 1"-2.5", DN25-DN65
Material: SS304, SS316L
Surface finish: Sand blasting type
Application: sterilization, filling, bottling, filter, heat exchanging system in Food, beverage, dairy, pharmacy, chemical or any food processing industries
Quality guarantee of 3 years
ISO 9001, FDA, SGS approved materials
7-10 days fast delivery on urgent requirements
10 years' Rich exporting experience to make you easy and happy with custom work
We also supply sanitary butterfly valve, sanitary flow diversion valve, sanitary CPM valve, sanitary regulating control valve, sanitary diaphragm valve, sanitary ball valve, sanitary sampling valve, sanitary safety valve, sanitary pressure reducing valve
sanitary elbow, sanitary tee, sanitary reducers, sanitary unions, sanitary clamp, sanitary ferrule, sanitary pipe clamps,sanitary cleaning ball, sanitary sight glass, sanitary manway manhole cover, sanitary strainer, filters, and other sanitary pipe fittings....
Welcome to check our other products.
JoNeng was established in July 2007, located in Wenzhou, China. Totally around 100 nos of workers and the factory Covers 6800m2.
We have three manufacturing factories under Joneng enterprise. Jiayuan is especially into elbow, tee, reducer fittings in both sanitary grade and schedule grade ; Lingdong is focusing into ferrule, union, sight glass, butterfly valves which are produced from CNC machines; Ezo is into manhole covers and small tanks.
We have three manufacturing factories under Joneng enterprise. Jiayuan is especially into elbow, tee, reducer fittings in both sanitary grade and schedule grade ; Lingdong is focusing into ferrule, union, sight glass, butterfly valves which are produced from CNC machines; Ezo is into manhole covers and small tanks.
We mainly manufacture:
Stainless steel butterfly valves, ball valves, check valves, CPM valves, diaphragm valves..;
Stainless steel sanitary & Industrial grade elbow, tee, reducer, ferrule, union fittings ;
Stainless steel sight glass, spray ball, manhole cover, flanges,strainers, filters,pipe clamps;
Stainless steel centrifugal pumps, CIP pump, emulsifying pump, rotary pumps;
Stainless steel butterfly valves, ball valves, check valves, CPM valves, diaphragm valves..;
Stainless steel sanitary & Industrial grade elbow, tee, reducer, ferrule, union fittings ;
Stainless steel sight glass, spray ball, manhole cover, flanges,strainers, filters,pipe clamps;
Stainless steel centrifugal pumps, CIP pump, emulsifying pump, rotary pumps;
The products are produced according to SMS, DIN, AS, BS, BPE, JIS,JIS, ISO,ANSI B16.5, ASME and other standards. They also can be customized. Our products have been exported to dozens of
countries and regions such as Europe, America, Middle East,Australia,Turkey, Iran,Thailand... more than 100 countries.
Joneng is approved with CE, PED, ISO 9001 quality management system. The products are complied with FDA certificate.
The product can be widely used in Dairy, Beer, Wine,Beverage, Food, medicine, Chemical,Water Treatment and other fields.
JoNeng always insist in "What we say, What we do". Our goal is to make a centennial factory.
countries and regions such as Europe, America, Middle East,Australia,Turkey, Iran,Thailand... more than 100 countries.
Joneng is approved with CE, PED, ISO 9001 quality management system. The products are complied with FDA certificate.
The product can be widely used in Dairy, Beer, Wine,Beverage, Food, medicine, Chemical,Water Treatment and other fields.
JoNeng always insist in "What we say, What we do". Our goal is to make a centennial factory.
3 PMI machines to inspect the chemical for raw materials, semi finished products and final products to avoid mixing issue.
1 nos of roughness machine to check the surface of the products.
- We keep huge stock for pipe fittings( stainless steel elbow, tee, reducers) , union, ferrules, butterfly valves, check valves, ball valves....so we can delivery the goods in fast way.
24 hours' action for quality complaints
For the stainless steel parts, we take 3 years guarantee without any excuse.Any quality complaints for our valves and fittings, please contact with us, a 24 hours' action is required. √17 years experience
√6800m2
√100 employees
√100+countries
√1000+ partners
√6800m2
√100 employees
√100+countries
√1000+ partners
OUR PRODUCTION CAPACITY
| Production Lines | Stainless steel sanitary pipe fittings' line, machining line, sanitary manhole line, | |
| Product Range | Sanitary butterfly Valve, sanitary diaphragm valve, sanitary pipe fittings, union, ferrule, sight glass, manhole cover, safety valve, sampling valve... | |
| Year Established | 2007 | |
| Factory Size in Square Meters | 5000M2 | |
| NO. OF TOTAL STAFF | 130 | |
| Production Capital | 8 000 000 USD | |
| Detail capacity | Manhole covers | 12000nos |
| Pipe fittings | 150000nos | |
| Ferrules, unions, connectors | 200000nos | |
| Diaphragm valves | 15000nos | |
| Butterfly valves | 20000nos | |
| Investment in Manufacturing Equipment | 750000USD | |
| Details of equipment | For machining parts 29 nos of LG Mazak CNC Machines 4 nos of local CNC machines 2 nos of automatic CNC center 12 nos of plain lathe For pipe fittings 4 nos of press 3 nos of cutting machine 3 nos of chamfering machine We also have the following quipments 4 nos of polishing machine 12 nos of grinding machine 3 nos of laser marking machine 3 nos of pressure testing machine 1 nos of temperature testing machine 3 nos of spectro instrument 1 nos of surface roughness device | |
| Primary Competitive Advantages | Strict inspection, honest business way, fast revert on order problem | |
| Stocked materials | Big quantity for raw forging of butterfly valve, diaphragm valve, ferrule, union, adapters, pipe fittings, clamps, sight glass, safety valve, manhole cover, | |
| OEM Services Provided | Yes | |
| Design Service Offered | Yes | |
| Sales Volume | 6 000 000 USD | |
| Export Percentage | 80% | |
| MAIN MARKET | USA, Germany, Hungary, Canada, Thailand, Holland, England, South Africa, Indonesia, Saudi, India, New Zealand, Australia, Middle East... | |
| Own Brand Name | JoNeng | |
FAQ:
1. Are you a trading company or factory? We are a manufacturing factory.
2. Do you have FDA certificate for the materials? Yes, FDA is very important for the food processing machines.
3. How do you control the quality?
Quality control is very important to avoid material mixing and poor quality. We control the quality from beginning to the end. We only have 304 and 316L two different materials. 100% inspection on raw materials. During production, different materials in different places. After materials are finished, we choose 10% for inspection. If there is 0.1% problem in 10%, then no excuse to go ahead for inspecting 100% of the materials.
4. About chemical components
This is first concerning for customers. We take our materials to our laboratory for each lot. You may ask for the laboratory report any time.
5. If there is any quality problem, how do you solve it?
We are very proud that we never let one customer leave us. We are not 100% perfect, there is some quality problem. We try our best to provide the correct materials in the beginning, so we need less time for quality problem.
If there is any quality problem, we take the responsibility. We believe what we are doing together, it will get back tomorrow. If we leave our responsibility, customers will leave us. If we always take our responsibility, we keep our customers with us.
6. How long is your delivery time? For normal products in 7-10 days; for bulk order, in 15-25 days. It depends.
7. Warranty
3 years warranty for all of our stainless steel products. Gaskets are not included due to the different application for customers.
8. More questions are appreciated.
