Audited Supplier
inch UNC 2-56 to UNF1 1/2-12 or metric M2 to M30
Steel
Common
Machinery, Medical, Rocket, Shipping, Die Casting Part Fastening
Right Rotation
None
ISO, RoHS, IATF16949
Customized
Qualicoil
Polybag + Carton
inch UNC 2-56 to UNF1 1/2-12 or metric M2 to M30
China
7326909000
Product Description
Screw Thread Insert (STI) Gauge
During the installation and use of screw thread inserts, the accuracy of the finished thread when the insert is installed is dependent upon the accuracy of the tapped hole. If the finished tapped hole gauges satisfactorily, the installed insert will be within the thread tolerance
STI gauges is used for checking accuracy of a tapped hole. The "NoGo" end of the gauge checks the pitch diameter is not too large and the "Go" end checks the pitch diameter is not too small.
Availabe sizes from inch UNC 2-56 to UNF1 1/2-12 or metric M2 to M30
During the installation and use of screw thread inserts, the accuracy of the finished thread when the insert is installed is dependent upon the accuracy of the tapped hole. If the finished tapped hole gauges satisfactorily, the installed insert will be within the thread tolerance
STI gauges is used for checking accuracy of a tapped hole. The "NoGo" end of the gauge checks the pitch diameter is not too large and the "Go" end checks the pitch diameter is not too small.
Availabe sizes from inch UNC 2-56 to UNF1 1/2-12 or metric M2 to M30
Original Equipment Manufacture
The thread insert system enables to design high quality product using lighter weight materials such as aluminum and magnesium alloys while still achieving high strength and reliability in the threaded fastener assembly. Wire thread inserts are widely used by manufacturers in:
• Automotive, New energy vehicles
• Aerospace and Defense
• Industrial Electronics
• Consumer Electronics
• Ship Building and Transport
• Power Generation
• Manufacturing Equipment
Repair
When you encounter a damaged wire thread insert offers:
• Quickest and simplest method of repair to stripped or damaged
threads
• A superior thread with great holding power
• Most cost-effective method of repair
• Returns thread to the original size
• Generally stronger than the original female thread
Wire Thread Insert Type and Standards
Wire thread inserts are available in either standard free running form or screw lock type which provides an internal locking feature.
Inserts are manufactured for every thread form including ISO Metric coarse or fine thread sizes, UNC/UNF/UNEF, BSW/BSF, ISO228/1 etc...
Inserts are available in 5 different standard lengths. 1D, 1.5D, 2D, 2.5D and 3D.
Special lengths can also be customized on request.
Metric coarse or fine thread sizes
Inch sizes
Inch Fine size
Wire Thread Insert Material Types
Wire thread inserts are generally manufactured from SUS304 stainless steel (18-8), however inserts are available in a range of materials for special applications:
• Stainless Steel SUS 304 (AISI304)
Resistant Steel For normal applications. Temperatures ranging from -195˚C - 425°C (-320°F - 800°F)
• Stainless Steel SUS 316 (AISI316) Austenitic Corrosion
Resistant Steel For Marine applications up to 425°C (800°F)
• Inconel X - 750 Nickel Alloy. For high temperature applications 425°C - 550°C (800°F - 1020°F) or where low permeability is required.
• Phosphor Bronze (300°C)
For electrical bonding joints or low permeability
• Nimonic 90 for high temperature applications.
(650°C/1200°F)
• Nitronic 60 Austenitic antigalling alloy
Wire Thread Insert Product Ranges
Precision inserts
Inserts of ISO metric sizes, inch sizes, BSW/BSF, ISO228/1 etc...
Free-running or screw-locking types
Tang or tangless types
Inserts of different materials, finishes and coatings.
Taps and Gauges
Optimum results can be achieved with our precision taps and gauges to suit
hand-tapping through to volume production requirements. Using
the "Go - NoGo" gauge, tapped holes can be gauged to enable a
precision fit.
Thread Repair Kits
Our thread repair kits, covering the majority of sizes
commonly in use today is available. Our thread insert kits contain an HSS tap,
installation tools, tang break tools, drills, stainless steel inserts, and
instructions, in a sturdy reusable container.
Installation Tooling
We offers ample installation tools for selection, including manual tools, power tooling like high efficiency pneumatic and electric
installation tools for in-line production or repetitive maintenance
situations. Also associated tooling is available to facilitate
insert installation, including manual,
spring and pneumatic operated tang breakoff tools, extraction tools etc...
Services we provide:
Premium quality
Competitive prices
Fast delivery
OEM/ODM service
Accept small quantity to explore
