Audited Supplier
High Speed 60m/min Four Side Planer Woodworking Machinery for Short Material
Introduction:
VH-M718H high speed four side moulder which is 7 spindle moulder but with first two bottom planner, The rocessing of rough planing and fine planing which are carried out first to ensure the surface finish quality of the base planing. The shortest processing length is 150mm (continuous feeding), the spindle bearing adopts high precision bearing, the speed is 8500r/min, the feeding speed is up to 60M/min with the result of high processing efficiency, save the labor cost with the perfect and advantages of processing quality. It is the best choice for finger joint board industry and factories processing.
Parameters
| VH-M521GH |
| Working width(mm) | 25~210 |
| Working thickness(mm) | 8~140 |
| Length of working table(mm) | 1970 |
| Feeding speed(m/min) | 10~60 |
| Spindle diameter(mm) | ∮40 |
| Spindle speed(r/min) | 7500 |
| Air pressure(Mpa) | 0.6 |
| The first lower shaft power(kw) | 5.5 |
| The right shaft power(kw) | 5.5 |
| The left shaft power(kw) | 7.5 |
| The first upper shaft power(kw) | 7.5 |
| The second upper shaft power(kw) | / |
| The second lower shaft power(kw) | 5.5 |
| Beam lifting power(kw) | 0.75 |
| Feeding motor power(kw) | 5.5 |
| Total power(kw) | 37.75 |
| The first lower shaft diameter(mm) | ∮125 |
| The right shaft diameter(mm) | ∮125-∮180 |
| The left shaft diameter(mm) | ∮125-∮180 |
| The first upper shaft diameter(mm) | ∮125-∮180 |
| The second upper shaft diameter(mm) | / |
| The second lower shaft diameter(mm) | ∮125-∮200 |
| Feeding wheel diameter(mm) | ∮140 |
| Vacuum tube diameter(mm) | ∮140 |
| Overall dimension L*W*H (mm) | 7000x3200x1900 |
| Machine weight(kg) | 4620 |
Detailed Images
 | Four side moulder with first two bottom planers , this structure can more effectively process the relatively distorted wood in the plywood factory, enlarge the processing scope and reduce the processing cost. |
| It should be equipped with a automatic conveyor in front of side feeder in order to save labor intensity and improve efficiency |  |
 | The structure of cylinder floating feed roller is adopted under the worktable to overcome the problem of rough material feeding. Speed of side feeder could be up to 60 m/min. Chain of side feeder is toothed and it allows smooth passage of wood |
| During the processing on the side of the wood products, there are multiple groups of side pressure units to ensure that the wood close to the plate feeding processing. |  |
 | The front vertical plate of the left spindle and the side pressure wheel set are all compressed by pneumatic, which can flexibly adjust the pressure and equipped with auxiliary device of short material. Effective and smooth feeding of short material. |
| The front pressing plate of the top spindle is pneumatic pressing, which is more suitable for high-speed feeding |  |
 | Clamping system The side of the front worktable is equipped with side clamps, which are adjusted by frequency conversion and driven by a toothed chain. The feeding is powerful and smooth! |
| conveyor In order to solve the problem of slow manual feeding and difficult to meet the needs of fast feeding processing, it adopts variable frequency speed, widens and thickens the feeding belt, strengthens the structure, and is strong and durable! |  |
Processed effect
Package & Delivery
After passed the quality inspection, the machine will be wiped with biodegradable anti-rust oil to protect from the humid sea air. Then use PE film packaging.
Usually we use iron pallet handling equipment to the container. It can also be packaged in a fumigant-free wooden box according to customer requirements.
Pre-sale Service
· Tailored configuration solutions according to your needs.
· Customized service available.
· Free workshop layout design.
· Free visit reception service.
· Free supply chain support service.
After-sales Service
· Professional on-site installation, training and maintenance.
· Timely and efficient online and video technical support.
· Super 18 months warranty since package opened.
· Reliable lifetime spare parts support and technician service available.
Since established in 1990s years, we keep our attention on Four side moulder, Double Side Moulde, Rip saw,Optimizing cross cut saw and double end tenon machine. Depand on powerful R&D capability, strong machining capacity and high quality products and service, we have becoming a leader manufacturer in China
