Audited Supplier
CCAM Bearing Assembly
50-80m
>400 L/min
Motor
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Closed
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Bearing Barrel
004
008
009
009d, 009d-1
024, 024L-1
025
027
061
062, 062D
073
077
089
108
184, 184-1
Naipu or OEM
Wooden Case
C005M, D005M, E005M, F005M, FFAM005M
China
8413701090
Product Description
Slurry Pump Rotor Assembly E005M F005M FAM005M
Bearing assembly also called rotor assembly, pump parts assembly. It is a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
It is an important part of slurry pump and the most important part of drive power unit. The bearing assembly is to connect the pump and motor of a whole complete working system. Its stable operation will affect pump working and pump service life directly.
It is an important part of slurry pump and the most important part of drive power unit. The bearing assembly is to connect the pump and motor of a whole complete working system. Its stable operation will affect pump working and pump service life directly.
Product Overview:
Except the standard bearing assembly,we also use bearings with double frame,
| High Capacity | Standard |
| CC005 | C005 |
| CCAM005 | CAM005 |
| DD005 | D005 |
| DDAM005 | DAM005 |
| EE005 | E005 |
| EEAM005 | EAM005 |
| FF005 | F005 |
| FFAM005 | FAM005 |
| GG005-1 | G005 |
| GGAM005 | GAM005 |
| Part Name | Part No. |
| Bearing housing | 004 |
| Bearing Assembly | 005 |
| Bearing Sleeve | 008 |
| Bearing | 009 |
| Bearing - Drive End | 009D,009D-1 |
| End Cover | 024,024L-1 |
| Shim/End Cover Gasket | 025 |
| Labyrinth Locknut | 027 |
| Labyrinth | 062,062D |
| Shaft | 073 |
| Shaft Sleeve Ejector | 077 |
| Bearing Seal | 089 |
| Piston Ring | 108 |
| Piston Ring Compressor | 184,184-1 |
| Bearing Assembly | Pump Type | Bearing Type |
| ASC005M | 20A-L | A009,A009 |
| B005M | 1.5/1B-AH(R) ,1/1.5B-AH(R) | B009,B009 |
| BSC005M | 50B-L(R) | B009,B009 |
| CAM005M | 4/3C-AH(R),75C-L(R),1.5/1C-HH | C009,C009 |
| C005M | 3/2C-AH(R) | C009,C009 |
| D005M | 4/3D-AH(R) | D009,D009 |
| DAM005M | 6/4D-AH(R),6/4D-G,3/2D-HH | D009,D009 |
| DSC005M | 100D-L(R) | D009,D009 |
| E005M | 6/4E-AH(R),8/6E-G | E009,E009 |
| EAM005M | 8/6E-AH(R),10/8E-M,4/3E-HH | E009,E009 |
| ESC005M | 150E-L (R) | E009,E009 |
| FAM005M | 10/8F-AH | F009,F009 |
| F005M | 10/8F-G | F009,F009 |
| FG005M | 6/4F-HH | F009,F009 |
| GG005M | 12/10G-G | G009,G009 |
| G005M | 12/10G-GH ,14/12G-G | G009,G009 |
| R005M | 8/6R-AH(R),10/8R-M | R009D, R009 |
| SH005M | 10/8ST-AH,12/10ST-AH ,14/12ST-AH | S009D,S009 |
| S005M | 400ST-L,450ST-L(R) | S009D,S009 |
| S005M | 300S-L,350S-L(R) | S009D,S009 |
| S005-3M | 10/8S-GH,6S-H(P) | S009D,S009 |
| S005-1 | 10/8S-G | S009D,S009 |
| T005-1M | 14/12T-G,14/12T-AH ,18/16T-G | T009D, T009 |
| T005-1ML | 14/12T-G (anticlockwise) | T009D,T009 |
| TH005M | 16/14TU-GH, 16/14TU-AH | T009D,T009 |
| T005M | 550TU-L(R),650TU-L(R) | T009D, T009 |
Other Related Pump Parts:
Cover plate,Frame Plate,Impeller,Volute,Cover Plate Liner,Frame Plate Liner,Back Liner,shaft Sleeve etc.
| Basic Part No. | Material Code | Part Name |
| 001 | E62 | Adjusting Screw |
| 003 | G01 | Base |
| 005 | Bearing Assembly | |
| 011 | E62 | Clamp Washer |
| 013 | D20 | Cover Plate |
| 015 | E62 | Cover Plate Bolt |
| 017 | R26A | Cover Plate Liner |
| 018 | R26A | Cover Plate Liner (Half) |
| 024 | E62 | End Cover |
| 028 | G01 | Expeller |
| 029 | G01 | Expeller Ring |
| 029R | R08A | Expeller Ring (Rubber) |
| 032 | D20 | Frame Plate |
| 034 | E62 | Frame Plate Bolt |
| 036 | R26A | Frame Plate Liner |
| 039 | E63 | Frame Plate Stud |
| 041 | A05A,R26A | Frame Plate Liner Insert |
| 043 | R26A | Frame Plate Liner (Half) |
| 044 | K24 | Gland Assembly |
| 060 | R08A | Intake Joint |
| 062 | D70 | Labyrinth |
| 063 | K31 | Lantern Ring |
| 064 | S18 | Impeller O-Ring |
| 067 | E62 | Neck Ring |
| 070 | E05 | Shaft Key |
| 073 | E05 | Shaft |
| 075 | D20 | Shaft Sleeve |
| 076 | D20 | Shaft Sleeve (Long) |
| 078 | G01 | Stuffing Box |
| 081 | E02 | Keeper Plate |
| 083 | A05A,R26A | Throat Bush |
| 085 | E02 | Cotter |
| 090 | S10 | Lip Seal |
| 109 | S18 | Shaft O-Ring |
| 110 | A05A | Volute Liner |
| 111 | Q05 | Packing |
| 117 | E62 | Shaft Spacer |
| 118 | K31 | Lantern Restrictor |
| 118-1 | K24 | Lantern Restrictor(Low Flow) |
| 122 | R11A | Expeller Ring/Stuffing Box Seal |
| 124 | R08A | Volute Liner Seal |
| 125 | R08A | Volute Frame Seal |
| 132 | R08A | Discharge Joint Ring |
| 138 | E62 | Grease Cup Adaptor |
| 179 | C23 | Shaft Sleeve Spacer |
| 210 | S46 | Shaft O-Ring |
| 217 | S18 | Impeller O-Ring |
| 239 | C23 | Impeller Release Collar |
| 241 | K24 | Lip Seal Gland |
| 302 | E02 | Lifting Tube |
| 303 | E02 | Locating Nut |
| 304 | E02 | Volute Lifting Beam |
| 306 | E02 | Shaft Wrench |
| 310 | E02 | Stuffing Box / Expeller Ring |
| 425 | R08A | Dyna Seal |
| 430 | U14 | Nut Covers |
| 005 | Bearing Assembly | |
| 019 | E02 | Mounting Plate |
| 041 | A05A | Back Liner |
| 064 | S18 | Impeller O-Ring |
| 070 | E05 | Shaft Key |
| 092 | A05A | Casing |
| 102 | E02 | Column |
| 116-1 | R10A | Strainer - Upper (Rubber) |
| 116-2 | G01 | Strainer-Upper (Cast Iron) |
| 116-3 | U02A | Strainer-Upper(Urethane) |
| 116-4 | C23 | Strainer-Upper(SS Mesh) |
| 116L | U01A | Strainer-Lower |
| 125 | R08A | Back Liner Seal |
| 154 | E02 | Discharge Pipe |
| 204 | R00 | Discharge Pipe Gasket |
| 231 | E02 | Suction Pipe |
| 290 | E02 | Spacer |
| 293 | E02 | Discharge Pipe Support |
| 306 | E02 | Shaft Wrench |
| 430 | U04A | Nut Covers |
| 005 | Bearing Assembly | |
| 019 | Mounting Plate | |
| 041 | Back Liner | |
| 064 | Impeller O Ring | |
| 070 | Shaft Key | |
| 092 | Casing | |
| 102 | Column | |
| 116 | Strainer-Upper | |
| 116L | Strainer-Lower | |
| 153 | Column Clamp | |
| 154 | Discharge Pipe | |
| 290 | Spacer | |
| 291 | Socket Head Protectors | |
| 293 | Discharge Pipe Support | |
| 306 | Shaft Wrench | |
| 421 | U-Bolt |
Naipu Workshop:
Naipu have Mould workshop,casting workshop,heat treatment workshop,machining workshop,assembly workshop,testing workshop.one dragon service.
Quality Control System
Naipu Own Inspection Workshop,Every part every order we will do the test before delivery!
Contact US:
Contact Person: Karen Tan
