Audited Supplier
HXH380
24 Hours Service Online
24 Months
Injection Molding Machine
Horizontal
Thermoplastic
Screw Type
Hydraulic & Mechanical
Automatic
Computerized
CE, ISO9001:2008, SGS, TUV
Servo Energy Saving
Engineers Avaiable to Service Machine
According to Countries
Malaysia,Indonesia,Turkey,Mexico,Uzberkistan
100% New
14 Ton
HIGHSUN
Standard Packing
6.98x1.81x2.04
China
847710
Product Description
HXH High-speed Series Plastic Injection Moilding Machine
Larger space between tie-bar
The stress distribution of each part of the machine during operation is analyzed by software, the design of the clamping part is optimized according to the high-speed molding requirements for thin-walled products. The HXH series has a larger mold volume compared with the same models from different manufacturers.
Lower energy consumption
All configuration (power system, heating system, cooling system) is optimized according to the requirements of the product molding cycle (fast) and molding characteristics (thin wall). After the test and comparison of clients, it is found that under the same mold and the same output, HXH series can save about 12%-15% energy consumption compared to other brands.
Lighter product weight
The optimized clamping unit ensures the appearance of the product and optimizes the exhaust effect of the mold by using a reasonable clamping pressure. It performs injection molding at a high speed to realize the lightweight of the product
Lower lubricating cost
The unique lubricating and recyclable device realizes the reuse of lubricating oil through the recycling and filtering of lubricating oil, which saves costs for customers. The average annual saving of lubricating oil is about ¥18,000 (lubricating 1 every 300-500 shot)
Larger space between tie-bar
The stress distribution of each part of the machine during operation is analyzed by software, the design of the clamping part is optimized according to the high-speed molding requirements for thin-walled products. The HXH series has a larger mold volume compared with the same models from different manufacturers.
Lower energy consumption
All configuration (power system, heating system, cooling system) is optimized according to the requirements of the product molding cycle (fast) and molding characteristics (thin wall). After the test and comparison of clients, it is found that under the same mold and the same output, HXH series can save about 12%-15% energy consumption compared to other brands.
Lighter product weight
The optimized clamping unit ensures the appearance of the product and optimizes the exhaust effect of the mold by using a reasonable clamping pressure. It performs injection molding at a high speed to realize the lightweight of the product
Lower lubricating cost
The unique lubricating and recyclable device realizes the reuse of lubricating oil through the recycling and filtering of lubricating oil, which saves costs for customers. The average annual saving of lubricating oil is about ¥18,000 (lubricating 1 every 300-500 shot)
| MODEL: HXH380 | ||||
| TECHNICAL PARAMETER TABLE | A | B | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 55 | 60 |
| SCREW L/D RATIO | L/D | 24 | 22 | |
| INJECTION CAPACITY IN THEORY | cm3 | 582 | 692 | |
| INJECTION WEIGHT(PS) | g | 529 | 630 | |
| INJECTION PRESSURE | MPa | 171 | 144 | |
| INJECTION VELOCITY | mm/s | 380 | ||
| PLASTICIZING CAPACITY | g/s | 80 | 97 | |
| SCREW SPEED | rpm | 400 | ||
| CLAMPING UNIT | CLAMPING FORCE | KN | 3800 | |
| MOVING MOULD-PLATE STROKE | mm | 630 | ||
| MAX. MOULD HEIGHT | mm | 650 | ||
| MIN. MOULD HEIGHT | mm | 250 | ||
| SPACE BWTWEEN TIE-BARS (W*H) | mm | 710*660 | ||
| HYDRAULIC EJECTOR FORCE | KN | 125 | ||
| HYDRAULIC EJECTOR STROKE | mm | 180 | ||
| EJECTOR NUMBER | n | 13 | ||
| OTHERS | PUMP PRESSURE | MPa | 19 | |
| MOTOR/DRIVING POWER | KW | 45+45 | ||
| HEATING CAPACITY | KW | 20.3 | ||
| MACHINE DIMENSION (L*W*H) | m | 6.98*1.81*2.04 | ||
| MACHINE WEIGHT | t | 14 | ||
| OIL TANK CAPACITY | L | 800 | ||
 |
 |
 |
