Audited Supplier
Linear Automatic PET Blow Molding Machine is an economical model self-developed by LiDLi technical team, with features economic, fast, and convenient. It can make different kinds of PET packages for water, edible oil, juice, wine, cosmetics, etc. It can make max. 2Litre bottle.1. Upgrade to Servo Motor Drive:
a.Preform Feeding System: servo motor partitioning effectively solves the problem of wear and deformation.
b.Preform Transfer System: PET preform horizontal movements driven by Servo Motor. Make preforms 4pcs as one unit, overall simplified stepping motion, achieve high-speed positioning and smooth motion. to complete one step cycle, the Servo Motor drive gear rotates only one-third of a turn. The speed of preform moving is 2 times of Cylinder Driven way.
2. Mold fixed by drawer design, mold changeover can be easily done in a half-hour.
3. Efficiency Constant Temperature Oven:
a.Use the most advanced high-frequency Infrared Lamp, to increase heating efficiency by 30%-50%.
b.Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c.Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to a constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-28~45ºC).
d.Preform a self-rotation System, ensuring every side of every preform is heated evenly, which ensures the quality of the blown bottle. (thickness up to 4.5mm)
e.Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation
Configuration for Blow Molding Machine
| No. | Description | Brand & Origin |
| 1 | PLC | Mitsubishi(Japan) |
| 2 | Operating Panel | Schneider (France) |
| 3 | Cylinder | TAIWAN |
| 4 | Servo Motor | XINJIE (CHINA) |
| Speed Reducer | XINJIE (France) | |
| 5 | Valve | TAIWAN |
| 6 | Photoelectricity switch | Omron (Japan) |
| 7 | AC Contactor, Thermal Relay | Schneider (France) |
Specification for Blow Molding Machine
| Items | Unit | Model | |
| Mold Spec. | Clamping stroke | mm | 125 |
| Stretching stroke | mm | 240 | |
| Bottom stroke | mm | 30 | |
| Cavity pitch | mm | 114.3 | |
| Number of cavities | cavities | 6 | |
| Container Spec. | Max. volume, ctr. | L | 2 |
| Neck diameter | mm | 18~38 | |
| Max. diameter, ctr. | mm | 114.3 | |
| Max. height, ctr. | mm | 320 | |
| Power Spec. | Total power | kW | 130 |
| Heating Power | kW | 120 | |
| Air Compressor Spec. | Blowing pressure | Kg/cm2 | 28-35 |
| High-pressure air consumption | m3/min | 3.6 | |
| Water Chilling Spec. | Operating pressure | Kg/cm2 | ≥6 |
| Temperature range | ºC | 5~20 | |
| Refrigerating capacity | kcal/hr | 15000 | |
| Flow Rate | m3/h | 4.1 | |
| Water Cooling Spec. | Operating pressure | Kg/cm2 | ≥4 |
| Temperature range | ºC | ≤30 | |
| Flow Rate | m3/h | 4.8 | |
| Main Machine Spec. | Size(L*W*H) | mm | 5200*1790*2110 |
| Weight | Kg | 7500 | |
Spare Parts for Blow Molding Machine
| SN. | Description | Specification | Qty. | Unit | Note |
| 1 | Hex wrench | φ14 | 1 | piece | |
| 2 | Solid wrench | 1 | piece | ||
| 3 | Monkey Wrench | Φ 50 | 1 | piece | |
| 4 | Cross Screwdriver | 1 | piece | ||
| 5 | Slotted Screwdriver | 1 | piece | ||
| 6 | Slotted Screwdriver | 3MM | 2 | piece | |
| 7 | Combination Wrenches | 8 | piece | ||
| 8 | Tool kit | 1 | piece | ||
| 9 | Quick Connector (Non-adjustable) | Φ6-M5 | 10 | piece | |
| φ10-1/2 | 2 | piece | |||
| Φ8-1/4 | 6 | piece | |||
| Φ10-1/4 | 6 | piece | |||
| φ16-1/2 | 6 | piece | |||
| 10 | T-junction | φ6 | 6 | piece | |
| φ8 | 2 | piece | |||
| φ8 | 4 | piece | |||
| 11 | Quick Connector ( straight ) | Φ8-Φ6 | 6 | piece | |
| 13 | Elbow Connector (Adjustable ) | Φ8-1/8 | 10 | piece | |
| Φ8-1/4 | 4 | piece | |||
| (Φ6-M5) | 6 | piece | |||
| 14 | Elbow Connector (Non-Adjustable ) | Φ10-3/8 | 2 | piece | |
| Φ10-1/4 | 6 | piece | |||
| Φ16-1/2 | 4 | piece | |||
| 15 | PU Pipe | φ6×2 meter | 1 | piece | |
| φ8×6 meter | 1 | piece | |||
| φ16×2 meter | 1 | piece | |||
| φ10×4 meter | 1 | piece | |||
| 16 | Sealing parts | 4 | piece | ||
| 17 | Heat Lamps | 20 | piece | ||
| 18 | (Cylinder) magnetic switch | 3 | piece | ||
| 19 | Optoelectronic switch | 4 | piece | ||
| 20 | Approach switch | 4 | piece | ||
| 21 | Servo Proximity switch | 4 | piece | ||
| 22 | Supercharge screw (with O ring) | 4 | piece | ||
| 23 | High-pressure pipe (1 inch 3 Meters / containing two high-pressure joints) | 2 | piece | ||
| 24 | Supercharge sealing parts | 2 | piece | ||
| 25 | Buffer rubber of Stretching rod | 2 | piece | ||
| 26 | Buffer rubber of Stretching rod | 2 | piece | ||
| 27 | Revolution link | 6 | set | ||
| 28 | Perform holder | 6 | piece | ||
| 29 | Φ8 Clamp spring (Outside) | 100 | piece | ||
| 30 | Chain pin | 12 | piece | ||
| 31 | Clamp spring of preform holder (Inner) | 12 | piece | ||
| 32 | Gripper | 4 | pair | ||
| 33 | Machine feet Φ165 | 8 | piece | ||
| 34 | Tools | 1 | SET | ||
7*24 Online Service
if you have any problem with our product, you can inform us by Email, we will reply to you at once when we get it and offer you a good solution to solve the problem.
China's high-end liquid(beverage) packaging machinery R&D and manufacturing base, is committed to building smart factories with turnkey solutions for liquid(beverage) companies. Since its founding, LiDLi, under the concept of "Driving development through innovation and winning the market with quality", has been providing global customers in the five fields of beverages, dairy, liquors, condiments, and daily chemical products with complete sets of intelligent equipment, including pretreatment system, combi block, blowing system, filling system, secondary packaging system, etc., realizing the dream of "Made in China, Made for World".
From the support of the formulation process, the three-dimensional design of the product container, to the overall layout of the users' factory, from the R&D and design of core equipment, the installation and commissioning of engineering projects, to the end customer professional training, LiDLi has more than production lines in more than countries and regions around the world.
By adhering to high-end positioning, technological innovation, forward-looking layout, its advanced technologies. LiDLi will continue to enhance its design creativity, product quality, and brand reputation to become a widely respected global leading supplier of liquid packaging solutions.
1. We have a professional bottle shape design team and manufacturing service according to customers' requirements.
2. We can provide you with production technology and beverage formulation.
3. We can provide you with a professional factory layout according to your final equipment list.
4. We provide technology training for free, which contains the operation and maintenance training of the machine in the customers' factory.
5. We guarantee all our machines, and parts for two years. After the warranty, we also can offer you the parts for replacement at our bottom price.
