Audited Supplier
CPJ series
Stretch Blow Molding Machine
Automatic
2 Years
Provided
Stretch Blow
SMC
Festo
Provided
Bearing, Motor, Pump, Gear, PLC, Pressure Vessel
2.5-3.5
New
Customized
Automatic
Provided
LiDLi
Film Wrapping Plus Wooden Case
CE, ISO, UL
Jiangsu
8422301090
Product Description
INTRODUCTION FOR 5 GALLON 20L BOTTLE BLOWING MACHINE
This equipment can produce different types of food, cooking oil bottles, carbonated drinks, mineral water bottles, juice bottles, wine bottles, tennis balls can, cosmetic bottles, etc.
A.FLOW RATE
B.TECHNICAL DATA
1.1Four Servo Motor Drive makes the machine drive system fully electrical.
a.Servo drives Preform Feeding System;
b.Servo drives Preform Transfer System;
c.Servo drives Mold Clamping System;
d.Servo drives Stretch System.
1.2Schneider Motion Control System
Mitsubishi PLC Servo System as the brain of the machine. PTO System (Pulse/Train/Output Servo Positioning Module) works on high-speed positioning, with higher speed, higher noise immunity, and precise positioning.
1.3Mold Fixed by Drawer Design
Push the mold, fix the positioning screws. Mold changeover work can be easily done in a half-hour.
1.4High efficient Infrared Lamp, Oven Constant Temperature Design.
a.The most advanced high-frequency Infrared Lamp, increases heating efficiency by 30%-50%.
b.Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c.Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-28~45 ºC).
d.Preform self-rotation System, ensure every side of every preform is heated evenly, which ensures the quality of the blown bottle.
e.Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation.
Specification
Configuration of Blow Molding Machine
A.FLOW RATE
B.TECHNICAL DATA1.1Four Servo Motor Drive makes the machine drive system fully electrical.
a.Servo drives Preform Feeding System;
b.Servo drives Preform Transfer System;
c.Servo drives Mold Clamping System;
d.Servo drives Stretch System.
1.2Schneider Motion Control SystemMitsubishi PLC Servo System as the brain of the machine. PTO System (Pulse/Train/Output Servo Positioning Module) works on high-speed positioning, with higher speed, higher noise immunity, and precise positioning.
1.3Mold Fixed by Drawer DesignPush the mold, fix the positioning screws. Mold changeover work can be easily done in a half-hour.
1.4High efficient Infrared Lamp, Oven Constant Temperature Design.
a.The most advanced high-frequency Infrared Lamp, increases heating efficiency by 30%-50%.
b.Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c.Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-28~45 ºC).
d.Preform self-rotation System, ensure every side of every preform is heated evenly, which ensures the quality of the blown bottle.
e.Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation.
Specification| Container spec | Max volume | 20L |
| Max diameter | ∅280mm | |
| Neck size | ≤∅70mm | |
| Max bottle height | 420mm | |
| Max perform height | 280mm | |
| Theoretical output(BPH) | 300-400 BPH(300g) | |
| Molding spec | Clamping stroke | 320mm |
| Width of mold | 680mm | |
| Bottom stroke | 50mm | |
| Thickness of mold | 400mm | |
| Number of cavities | 1 | |
| other | Cavity pitch | 78mm |
| Power consumption | 30 KW | |
| Operation pressure | 0.8-1.0Mpa | |
| Blowing pressure | 2.8-3.5Mpa | |
| Lamp layer | 12 layers | |
| Heating holder number | 76 pcs | |
| Heating area | 5 | |
| Rated power | 80KW | |
| High-pressure air consumption | 5.2 m3/min | |
| Main machine weight | 4.8T | |
| Main machine size | 3500X2100X2300(main machine) 4900X4000X2900(footprint) |
| Description | Brand | Origin | |
| PLC | Mitsubishi | Japan | |
| Control system | Touch screen | Mitsubishi | Japan |
| Servo motor | Mitsubishi | Japan | |
| Signal amplifying board | XIZI | China | |
| Heating lamp | Taichung | China | |
| Switching Power Supply | Schneider | France | |
| Contactor | Schneider | France | |
| Proximity Sensor | Omron | Japan | |
| Frequency converter | Mitsubishi | Japan | |
| Pneumatic system | Blow valve | PARKER | USA |
| Operation valve | SMC | Japan | |
| T-junction | SMC | Japan | |
| Rotary cylinder | SMC | Japan | |
| Gripper cylinder | SMC | Japan |
