Audited Supplier
FEATURES
• Big spindle bore and double chuck allows clamp and process big diameter pipes
• Integral machine bed adopts high strength iron to realize high rigidity and precision
• Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance
• Equipped with taper guide bar device this enables the machine to process taper threads
PIPE THREADING LATHE INTRODUCTION
Q13 series pipe threading lathe mainly used for turning the internal and external threads including metric and inch thread, as well as having all the common functions of normal engine lathe such as processing the inner bore, end face of shafts and disks, this series is equipped with taper guide bar device which enables this series to process taper thread, this series is widely used in industries including petroleum exploiting, minerals mining, chemical piping and geological prospecting, for processing and repairing drilling pipe, drilling rod, thread coupling and so on.
| SPECIFICATION | UNIT | Q1313 | Q1319C | Q1322C | Q1325C | Q1327C | ||
| Capacity | Swing over bed | mm | 630/800 | 630/800 | 630/800 | 800 | 800 | |
| Swing over cross slide | mm | 340/520 | 340/520 | 340/520 | 480 | 480 | ||
| Distance between centers | mm | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | ||
| Pipe threading range | mm | 30-126 | 50-193 | 50-220 | 50-250 | 50-270 | ||
| Spindle | Guideway width | mm | 550 | 550 | 550 | 600 | 600 | |
| Max. load capacity | T | 3 | 3 | 3 | 4 | 4 | ||
| Spindle bore | mm | 130 | 206 | 225 | 255 | 280 | ||
| Spindle speed steps | - | FWD.18/REV.9 | VF. 4 steps | VF. 4 steps | ||||
| Spindle speed range | rpm | 30-650 | 20-550 | 20-420 | ||||
| Chuck | mm | φ 400 3-jaw manual | φ520 4-jaw manual | φ630 4-jaw manual | ||||
Turret | Turret/tool post | - | Manual 4 position | Manual 4 position | Manual 4 position | |||
| Tool shank size | mm | 30x30 | 32x32 | 32x32 | 32x32 | 32x32 | ||
Feed | X axis travel | mm | 320/420 | 320/420 | 320/420 | 420 | 420 | |
| Z axis travel | mm | 1350/2850 | 1350/2850 | 1350/2850 | 1250/2750 | 1250/2750 | ||
| X axis feed grade/range | mm/r | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | ||
| Z axis feed grade/range | mm/r | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | ||
| X axis rapid traverse | mm/min | 2300 | 2300 | 2300 | 2300 | 2300 | ||
| Z axis rapid traverse | mm/min | 4000 | 4000 | 4000 | 4000 | 4000 | ||
| Metric thread grade/range | mm | 52/1-24 | 1-15 | 1-15 | 1-15 | 1-15 | ||
| Inch thread grade/range | T.P.I | 40/28-2 | 14-1 | 14-1 | 14-1 | 14-1 | ||
| Tailstock quill diameter | mm | φ100 | φ100 | φ100 | φ120 | φ120 | ||
Tailstock | Tailstock quill taper | MT5 | MT5 | MT5 | MT6 | MT6 | ||
| Tailstock quill travel | mm | 250 | 250 | 250 | 250 | 250 | ||
Motor | Main spindle motor | kW | 11 | 11 | 11 | 15 | 15 | |
| Rapid traverse motor | kW | 0.3 | 0.3 | 0.3 | 1.1 | 1.1 | ||
| Coolant pump motor | kW | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | ||
Dimension | Width x Height | mm | 1500x1500 | 1550x1550 | 1650x1550 | 1700x1600 | 1700x1600 | |
| Length | mm | 3700/5200 | 3700/5200 | 3700/5200 | 4100/5600 | 4100/5600 | ||
| Weight | Net weight | T | 4.0/5.2 | 4.3Z5.5 | 4.5/57 | 8.0/9.0 | 8.0/9.0 | |
| .Please note: machine bed length can customize according to real work demand. | ||||||||
| SPECIFICATION | UNIT | Q1327 | Q1332 | Q1338 | Q1343 | Q1350 | ||
| Capacity | Swing over bed | mm | 1000 | 1000 | 1000 | 1000 | 1200 | |
| Swing over cross slide | mm | 610 | 610 | 610 | 610 | 710 | ||
| Distance between centers | mm | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | ||
| Pipe threading range | mm | 130-270 | 190-320 | 190-380 | 270-430 | 330-510 | ||
Spindle | Guideway width | mm | 755 | 755 | 755 | 755 | 765 | |
| Max. load capacity | T | 6 | 6 | 6 | 6 | 6 | ||
| Spindle bore | mm | 280 | 330 | 390 | 440 | 520 | ||
| Spindle speed steps | - | FWD.12 steps | FWD.9 steps | FWD.9 steps | FWD.9 steps | FWD.9 steps | ||
| Spindle speed range | rpm | 16-380 | 7.5-280 | 6-205 | 4.9-180 | 4.9-180 | ||
| Chuck | mm | φ800 4-jaw electric | φ780 4-jaw electric | φ850 4-jaw electric | φ1000 4-jaw electric | |||
Turret | Turret/tool post | Manual 4 position | ||||||
| Tool shank size | mm | 45x45 | 45x45 | 45x45 | 45x45 | 45x45 | ||
Feed | X axis travel | mm | 520 | 520 | 520 | 520 | 520 | |
| Z axis travel | mm | 1350/2850 | 135Q/2850 | 135Q/2850 | 1350/2850 | 1350/2850 | ||
| X axis feed grade/range | mm/r | 40/0.05-1.5 | 32/0.05-0.75 | 32/0.05-0.75 | 32/0.05-0.75 | 32/0.05-0.75 | ||
| Z axis feed grade/range | mm/r | 40/0.1-3 | 32/0.1-1.5 | 32/0.1-1.5 | 32/0.1-1.5 | 32/0.1-1.5 | ||
| X axis rapid traverse | mm/min | 1870 | 1870 | 1870 | 1870 | 1870 | ||
| Z axis rapid traverse | mm/min | 3740 | 3740 | 3740 | 3740 | 3740 | ||
| Metric thread grade/range | mm | 30/1-30 | 23/1-15 | 23/1-15 | 23/1-15 | 23/1-15 | ||
| Inch thread grade/range | T.P.I | 27/28-1 | 22/28-2 | 22/28-2 | 22/28-2 | 22/28-2 | ||
| Tailstock quill diameter | mm | φ160 | φ160 | φ160 | φ160 | φ160 | ||
Tailstock | Tailstock quill taper | - | MT6 | MT6 | MT6 | MT6 | MT6 | |
| Tailstock quill travel | mm | 300 | 300 | 300 | 300 | 300 | ||
Motor | Main spindle motor | kW | 22 | 22 | 22 | 22 | 22 | |
| Rapid traverse motor | kW | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Coolant pump motor | kW | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | ||
Dimension | Widtfi x Height | mm | 2100x1600 | 2100x1650 | 2100x1700 | 2100x1700 | 2100x1850 | |
| Length | mm | 4800/6300 | 4900/6400 | 4900/6400 | 5000/6500 | 5000/6500 | ||
| Weight | Net weight | T | 10.0/11.5 | 11.5/13.0 | 12.8/14.3 | 13.0/14.5 | 15.0/16.5 | |
| Please note: machine bed length can customize according to real work demand. | ||||||||
