Audited Supplier
Welcome to our homepage to see more content!
Basic Information
Galvanized Steel wire is divided into two kinds of hot plating and cold plating, which are different in application.
1.Electro galvanized wire,also calleed cold galvanized wire,is made of high quality carbon steel wire. The processing of thid wire id to use electyolytic equipment for galvanizing. In general,the zine coating is not very thick,but the electro galvanzied wire has enough anti-corrosion and anti-oxidation,the zinc coating surface is very average,smooth and bright. Electro galvanized wire zinc coated commonly is 8-50 g/m2. this is mainly used to make nails and wire ropes,wire mesh and fencing,binding of flowers and wire mesh weaving.
2.Hot dipped galvanized wire belongs to the primary wire products of galvanzation. The common sizes of hot dipped galvanized are from 8 gague to 16 gague,we aslo accept smaller or bigger diameter for customers' choices. Hot dipped galvanized wire with firm zice coating provides strong corrosion resistance and high tensile strength. This kind of wire is widely used for making handicrafts,woven wire mesh,forming fencing mesh,packing products and other daily uses.
Product Details
Wire rod is a rolled steel product (alloy or non-alloy), manufactured from semi-finished steel with a rectangular, rounded, hexagonal or squared shape. Especially, fine cross-sections are reached by sequent cold drawing. Wire rod is wrapped around into the coils and also carried in this form. The steel wire rod is a finished product and is cold-formed for farther processing. Although it has a variety of shapes, it is mostly rolled round. Diameters often range from 5 to 15 millimeters , with most comply with the ISO standards, makes it easy for the sizes to advance in increments of 1 mm to 20 mm. All steel wire rods are formed into the coils without any break. This is to ensure that steel wire rods are well-prepared for farther processing (usually by heat treating, coating, and cleaning). The coils' internal diameter often varies from 810 to 910 millimeters, and the external, from 1100 to 1300 millimeters (depends on the capability of mill's equipment). Subsequently, the weight of the coils differs from approximately 600 kg and larger above 2 tons.
Product Parameters
| Wire Gauge | SWG | BWG | AWG | |||
in | mm | in | mm | in | mm | |
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 | 0.252 0.232 0.212 0.192 0.176 0.160 0.144 0.128 0.116 0.104 0.092 0080 0.072 0.064 0.056 0.048 0.040 0.036 0.032 0.028 0.024 0.022 0.020 0.018 0.0164 0.0148 0.0136 0.0124 0.0116 0.0108 0.0100 0.0092 0.0084 0.0076 | 6.401 5.893 5.385 4.877 4.470 4.064 3.658 3.251 2.946 2.642 2.337 2.032 1.829 1.626 1.422 1.219 1.016 0.914 0.813 0.711 0.610 0.559 0.508 0.457 0.4166 0.3759 0.3454 0.3150 0.2946 0.2743 0.2540 0.2337 0.2134 0.1930 | 0.259 0.238 0.220 0.203 0.180 0.165 0.148 0.134 0.120 0.109 0.095 0.083 0.072 0.065 0.058 0.049 0.042 0.035 0.032 0.028 0.025 0.022 0.020 0.018 0.016 0.014 0.013 0.012 0.010 0.009 0.008 0.007 0.005 0.004 | 6.58 6.05 5.59 5.16 4.57 4.19 3.76 3.40 3.05 2.77 2.41 2.11 1.83 1.65 1.47 1.24 1.07 0.89 0.81 0.71 0.64 0.56 0.51 0.46 0.41 0.36 0.33 0.30 0.25 0.23 0.20 0.18 0.13 0.10 | 0.2294 0.2043 0.1819 0.1620 0.1443 0.1285 0.1144 0.1019 0.09074 0.08081 0.07196 0.06408 0.05707 0.05082 0.04526 0.04030 0.03589 0.03196 0.02846 0.02535 0.02257 0.02010 0.01790 0.01594 0.01420 0.01264 0.01126 0.01003 0.008928 0.007950 0.007080 0.006304 0.005615 0.005000 | 5.83 5.19 4.62 4.11 3.67 3.26 2.91 2.59 2.30 2.05 1.83 1.63 1.45 1.29 1.15 1.02 0.91 0.812 0.723 0.644 0.573 0.511 0.455 0.405 0.361 0.321 0.286 0.255 0.227 0.202 0.180 0.160 0.143 0.127 |
Others:
1. Material: mild steel wire.
2. Surface treatment: black annealing, cold (electric) galvanized wire, hot dip galvanized wire, annealed wire, wire drawing, etc.
3. Category: coiled wire, straight cut wire, U-shaped wire, bobbin wire.
4. Packaging: plastic woven bags, plastic sacks, cartons or packaging according to customer requirements.
5. Size :3-36. Customization is acceptable.
6. Length: 20cm-100cm (cut).
7. Use: mainly used in construction, mining, oil and other industries.
Hot dip galvanizing, also known as hot dip zinc and hot dip galvanizing, is an effective metal corrosion prevention method, mainly used in metal structure facilities in various industries.
The main method is to immerse the steel parts after rust removal into the melting zinc liquid about 500ºC, so that the surface of the steel members are attached to the zinc layer, so as to play the purpose of anti-corrosion.
Hot dip galvanizing is developed from the older hot plating method, hot dip galvanizing process: pickling of finished products - washing - adding plating solution - drying - hanging plating - cooling - medicine - cleaning - polishing - hot dip galvanizing completion.
Galvanized steel wire is not only lightweight, but also has a certain improvement in appearance. Galvanized steel wire is also used in many fields, in order to deepen our understanding of galvanized steel wire, let's take a look at its application areas.
Steel wire products have a very important performance characteristic, which determines that it is widely used in various fields. This feature is that galvanized wire has good toughness and elasticity. Formed galvanized wire products can be bent and folded, can be applied to different environmental areas of different needs, and has good corrosion resistance, the use of production and life, only more and more.
When it comes to the application of galvanized wire, in fact, we can often see it in daily life. For example, the net fence around the tennis court and playground in the school, as well as the fence on both sides of the highway, many of these are made of galvanized wire. Even the small openings on the outside of the simple gift wrap in our lives, many of them are sealed using a small piece of galvanized wire wrapped in tin foil.
The application field of galvanized iron wire is large to the construction industry, metallurgical industry, iron and steel industry, small to handmade products, product packaging, etc., which shows that the application range of galvanized wire is very wide. And galvanized silk manufacturers also produce a variety of types, a variety of specifications of elastic toughness galvanized wire products for different areas of product demand characteristics, to meet the current market demand.
Hebei Leicheng Power Technology Co., LTD is a technology-oriented enterprise specializing in R&D, production, sales and services of power transformers, HV/LV switch cabinets and related products.
Since its inception, our company has been committed to the path of professional development. By virtue of its strong technical force, domestic and foreign advanced equipment, innovative ideas and extensive manufacturing experience, it has been certified by ISO9000 and adopts CAD to provide customers with environment-friendly, energy-saving, low-carbon and high-quality products suitable for regional characteristics to meet the market and the basic requirements of different customers.
Currently the company mainly produces HV/LV power distribution cabinets, pre-fabricated substations, power distribution transformers, HV/LV switches and other products.
Its products cover the national market of China. Also the products are exported to Central Asia, Africa, Southeast Asia, the Middle East, South America and other countries and regions.
You can rest assured that the packaging of the product, as the last link we strictly control!
Q: Are you a Manufacturer, factory or Trading company ?
A: Yes, We are engaging in the research and development, production and operation of transformer for over 10 years.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q: Production Time?
A: In general, it take 4~6weeks and it depend on the different style.
Q: What's your payment terms?
A: Pay by T/T and L/C is acceptable.
Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.Each of our unit has 3C certificate. If you need any other Certificate, we can help you to apply it.
Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.
Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".
Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.
Welcome to our homepage to see more content!
