Audited Supplier
ZBW-12/0.4 pre installed substation is made of American box changed.
The product as the cable of distribution network power supply unit, high voltage control, protection, substation, as well as the power distribution equipment in one of the sets of pre products, widely used in urban and rural distribution network.
The product will be high voltage load switch, high voltage fuse in the transformer oil, with a total of two kinds of structural forms of the transformer box body or box.
Tank using full sealed structure, with the oil temperature gauge, oil level gauge, pressure gauge, pressure release valve, drain valve etc. element to monitoring transformer operation status.
The product is divided into ring network, terminal type and power supply mode. In order to make this product is more suitable for the actual requirements of the power grid in China, company and push the plug type fuse, fuse fuse does not affect the performance of transformer oil.
According to the low voltage feed to the complexity of the, ZBW-12/0.4 products points to strengthen the standard type, type and comprehensive type three shell form, users and design units in the selection. Do more flexible and more economic.
Product Features and Structure
Application and Structure: The ZBW prefabricated substation, also known as an "American box-type substation," uses a fully sealed structure to ensure environmental resilience. The transformer section integrates a high-voltage load switch and high-voltage fuse in transformer oil, providing reliable protection without compromising transformer oil quality.
High-Voltage Components: Equipped with a high-voltage load switch, high-voltage fuses, and connection options for both ring network and terminal configurations, the substation meets diverse distribution network requirements with flexibility and safety.
Monitoring and Maintenance: The substation tank includes indicators for oil temperature, oil level, pressure, and pressure relief, ensuring effective monitoring of transformer status.
Shell Construction: The robust shell is manufactured from high-strength materials with anti-corrosion treatment, providing protection against harsh weather. This makes the substation ideal for outdoor installation with long service life.
Technical Specifications
- Rated Voltage: 10/0.4 kV (high and low voltage sides)
- High-Voltage Side Rated Voltage: 10kV or 12kV
- Low-Voltage Side Rated Voltage: 0.4kV
- Frequency: 50 Hz
- Protection Grade: IP3X
- Noise Level: ≤50 dB
The substation supports various high-voltage rated withstand voltages and impulse withstand levels for increased safety and reliability in the field.
Environmental Suitability
The ZBW prefabricated substation is designed to operate effectively in environments with temperatures ranging from -30°C to +40°C, altitudes up to 1000m, and humidity up to 95%. Its construction is highly resistant to corrosion, seismic activity, and other environmental stresses.
Construction Requirements
The foundation of the substation is designed to meet a minimum load-bearing capacity of 100 kPa and includes a drainage system and protective grounding with grounding resistance ≤ 4 ohms.
(Updated2025.March.5th)
| Parameter Name | Parameter Value | |
|---|---|---|
| Rated Voltage | 10KV/0.4KV | |
| High Voltage Side Rated Voltage | 10KV | |
| High Voltage Side | 12KV | |
| Low Voltage Side Rated Voltage | 0.4KV | |
| Rated Frequency | 50Hz | |
| High Voltage Switch Thermal Stability Capacity | 20KA/26 | |
| Low Voltage Main Circuit Breaker Rated Short-Circuit Breaking Capacity | 35KA | |
| Low Voltage Distribution Circuit Breaker Rated Short-Circuit Breaking Capacity | 35KA | |
| High Voltage Load Switch Transfer Current | >1500A | |
| Insulation Level | ||
| Rated Voltage (KV) | 10 | 0.4 |
| Transformer | 35KV | 2.5KV |
| Switch to Ground and Phase to Phase | 42KV | - |
| Between Disconnectors | 48KV | - |
| Peak Value of Impulse Withstand Voltage (KV) | 75 | 85 |
| Noise Level | <50dB | |
| Protection Grade of Box Shell | Not less than IP3X |
Note:
All products can be customized according to capacity, voltage, no-load/load loss, and standards after consultation with our company.
