Audited Supplier
Machine characteristic1.Application
Used in heavy industry, such as aircraft, automobiles, ships, etc., mainly used for processing large complex parts.
2.Machine Characteristic
LM-3020 is a CNC machine tool with a mobile gantry structure:
(1)The gantry structure is driven by dual servo motors in the same direction, with good dynamic response and high output torque.
(2)The structural layout is reasonable, and the machine tool has good rigidity.
(3)Wide processing range, greatly expanding the processing range of parts.
(4)It can achieve significant rough machining and semi precision machining, greatly improving the comprehensive utilization rate of machine tool OEE.
(5)It can perform high speed and high precision machining.
(6)The operators can easily load, unload, move, position, and measure workpieces.
(7)The operators maintains the machine conveniently and quickly every day.
| Item | Unit | LM-3020 | |
| Travel | X axis(actuating axis) | mm | 3100 |
| A axis(driven axis) | mm | 3100 | |
| Y axis | mm | 2500 | |
| Z axis | mm | 700 | |
| Gantry width | mm | 2300 | |
| Controller | System | Fanuc/Siemens/Syntec/Mitsubishi | |
| Total axes | 4 | ||
| Accuracy | Positioning accuracy | mm | ±0.010/300 |
| Repositioning accuracy | mm | ±0.005/300 | |
| Spindle | Spindle taper | BT40/BT50 | |
| Spindle speed | rpm | 8000/10000/12000 | |
| Spindle drive type | belt/direct | ||
| Spindle end face to work table | mm | 100-800 | |
| Table | Table size | mm | 3100×2000 |
| Table load | kg | 4000 | |
| T-slots | mm | 7-18×220 | |
| Guide rail | X/Y/Z axis ball screw | mm | 5020/5020/5020(screw diameter=50mm,pitch=20mm) |
| X/Y/Z axis guide rail type | linear | ||
| Motor power | Spindle motor | kw | 11 |
| X/Y/Z axis servo motor | kw | 4.5/3/3 | |
| Coolant pump motor | w | 750 | |
| Feed | Rapid feed | m/min | 20/20/20 |
| Cutting feed | m/min | 8/8/8 | |
| Others | Power | kva | 40 |
| Air pressure | kg/cm2 | 6~8 | |
| Dimensions | mm | 4555×3360×2749 | |
| Weight | kg | 16000 | |
| Specification | Unit | LM-1613 | LM-2013 | LM-2015 | LM-2518 | LM-3018 | LM-3022 | LM-4025 |
| X/Y/Z axis travel | mm | 1600/1300/800 | 2000/1300/800 | 2000/1500/800 | 2500/1800/1000 | 3000/1800/1000 | 3000/2200/1000 | 4000/2700/1000 |
| Gantry width | mm | 1300 | 1300 | 1500 | 1800 | 1800 | 2300 | 2700 |
| Gantry height | mm | 1060 | 1060 | 1030 | 1300 | 1300 | 1280 | 1400 |
| Table size | mm | 1600×1000 | 2000×1000 | 2100×1200 | 2500×1600 | 3000×1600 | 3000×2000 | 4000×2300 |
| Table load | kg | 2000 | 3000 | 3500 | 7000 | 8000 | 10000 | 12000 |
| T-slots | mm | 7-22×140 | 7-22×140 | 7-22×170 | 9-22×180 | 9-22×180 | 9-22×200 | 11-18×200 |
| System | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | Fanuc Siemens Mitsubishi | |
| Spindle speed | rpm | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 |
| Spindle taper | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | |
| Driver type | Belt | Belt | Belt | Belt | Belt | Belt | Belt | |
| Spindle end face to work table surface | mm | 190-990 | 190-990 | 150-950 | 150-1150 | 150-1150 | 280-1280 | 280-1280 |
| Spindle motor power | kw | 22 | 22 | 22 | 22 | 22 | 22 | 22 |
| Servo motor power | kw | 4.5/4.5/4.5 | 4.5/4.5/4.5 | 4.5/4.5/4.5 | 4.5/4.5/4.5 | 7/7/7 | 7/7/7 | 7/7/7 |
| Coolant pump power | w | 750 | 750 | 750 | 750 | 750 | 750 | 750 |
| Rapid feed | m/min | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 | 15/15/15 |
| Cutting feed | m/min | 10/10/10 | 10/10/10 | 10/10/10 | 10/10/10 | 10/10/10 | 10/10/10 | 10/10/10 |
| Positioning accuracy | mm | ±0.008/300 | ±0.008/300 | ±0.008/300 | ±0.008/300 | ±0.008/300 | ±0.008/300 | ±0.008/300 |
| Repositioning accuracy | mm | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 | ±0.005/300 |
| Weight | kg | 14500 | 16200 | 16800 | 25000 | 27500 | 33000 | 42000 |
| Demension | mm | 6600×4220×3820 | 7540×5130×4230 | 7600×4480×3590 | 8700×5530×4200 | 9700×5530×4200 | 10600×6530×4600 | 11750×6640×4500 |
Q1:What's your main products of your company?
A1:We manufacture all kinds of CNC machine tools ,such as Vertical Machine Center, Horizontal Machine Center, 5 axis Machine Center, Gantry Machine Center, Engraving Machine Center.
Q2:How can I choose the most suitable machines ?
A2:If you are the factory, please tell us your specification request or workpiece drawing, we will suggest the suitable model for you.
If you are the trading company, please tell us your customer's request or we can introduce various models of our company.
Q3:Where is our factory located? Can I visit there?
A3:Our factory is located in Dongguan City, Guangdong Province, China. You are warmly welcome to visit us.
Q4:How is the warranty?
A4:One year.We will do our best to serviced.
Q5:How long is the delivery time for our products?
A5:Twenty days to one month.
Q6:How about your quality?
A6:We have approved the ISO9001:2015 Quality management system and CE European safety standards. Our products are exported to Russia, Vietnam and other countries.
Q7:What is the package?
A7:The machine is by waterproof cloth to covered. And a packed by standard exported wooden case. It is very safety for oversea transportation.
Q8:What's the Payment Terms ?
A8:T/T,30% initial payment when order,70% balance payment before shipment; Irrevocable LC. Other way can discuss according to different situation.
