Audited Supplier
Application:
aerospace/war industry/IT/precision instrument/small and medium-sized box/mold
Characteristic:
1.Adopting the internationally popular inverted T-shaped moving column and integral bed structure, it has high rigidity and good stability.
2.The castings are cast using resin sand molds, with high accuracy retention.
3.The standard BT50 ring spray spindle is equipped with an air curtain protection device, completely avoiding the infiltration of cutting fluid and dust, ensuring spindle accuracy and extending service life.
4.The spindle transmission system of the machine tool is driven by a high-power servo motor, with a maximum speed of 6000rpm.
5.The machine tool is equipped with a spiral chip conveyor and a cutting scouring device that can timely discharge chips, avoiding the thermal impact of chips on the machine tool and ensuring high precision in machining.
6.The screw and guide rail of each axis are made of well-known brands, with high accuracy and good stability.
1.The bed of the horizontal machine tool adopts the most seismic resistant inverted T-shaped layout in the international market, with a box shaped closed structure and a front and rear bed integrated.
2.The workbench achieves precise positioning and locking through a mouse tooth plate, and the indexing units can be selected from 1 ° and 0.001 °.
Inverted T layout
| Item | Unit | W-630 | ||||
| Table | Number of tables | pcs | 1 | 2 | 1 | 2 |
| Table type | 1° | 1° | 0.001° | 0.001° | ||
| Table size | mm | 630×700 | ||||
| Maximum table load | kg | 950 | 800×2 | 950 | 800×2 | |
| Hole site | 24×M16 | 24×M16×2 | 24×M16 | 24×M16×2 | ||
| Maximum workpiece rotation diameter | mm | Φ1100 | Φ820 | Φ1100 | Φ820 | |
| Table swiching time | s | / | 24 | / | 24 | |
| Travel | X axis | mm | 1050 | |||
| Y axis | mm | 750 | ||||
| Z axis | mm | 900 | ||||
| Spindle center to table surface | mm | 120-870 | 0-750 | 120-870 | 0-750 | |
| Spindle end face to table center | mm | 130-1030 | ||||
| Controller | System | Fanuc/Siemens/Mitsubishi | ||||
| Total axes | 4 | |||||
| Accuracy | X/Y/Z axis positioning accuracy | mm | ±0.010/300 | |||
| X/Y/Z axis repositioning accuracy | mm | ±0.006/300 | ||||
| Rotary table positioning accuracy | " | ±15 | ||||
| Rotary table repositioning accuracy | " | ±5 | ||||
| Spindle | Taper | BT50 | ||||
| Maximum speed | rpm | 6000 | ||||
| Drive type | belt | |||||
| Screw & Guide rail | X/Y/Z axis ball screw specification | mm | 4512/4512/5012(x/y axis screw diameter=45mm,z axis=50mm;3 axis pitch=12mm) | |||
| X/Y/Z axis guide rail type | linear | |||||
| X/Y/Z axis guide rail width | mm | 45×2/45×2/55×2 | ||||
| *Tool magazine | Number of tools | T | 24 | |||
| Type | BT50/tool-arm type | |||||
| Motor power | Spindle motor | kw | 15/22 | |||
| X/Y/Z axis servo motor | kw | 4/7/7/1.6 | ||||
| Coolant pump motor | w | 750 | ||||
| Feed | Rapid feed | m/min | 24/24/24 | |||
| Cutting feed | m/min | 10/10/10 | ||||
| Others | Capacity | kva | 40 | |||
| Power | 380V/50HZ/3PH | |||||
| Air pressure | kg/cm2 | 6~8 | ||||
| Casting dimensions | mm | 3010×2690×2485 | 4225×2690×2485 | 3010×2690×2485 | 4225×2690×2485 | |
| Casting weight | kg | 8000 | 9000 | 8000 | 9000 | |
*Other optional configurations:probe,high pressure spindle outlet system,etc...
------------------------------------------------------------------
Positive T layout
| Item | Unit | W-630 | ||||
| Table | number of tables | pcs | 1 | 2 | 1 | 2 |
| table type | 1° | 1° | 0.001° | 0.001° | ||
| table size | mm | 630×630 | ||||
| maximum load | kg | 1200 | 800×2 | 1200 | 800×2 | |
| hole site | 24×M16 | 24×M16×2 | 24×M16 | 24×M16×2 | ||
| maximum workpiece rotation diameter | mm | Φ | Φ | Φ | Φ | |
| table swiching time | s | / | 24 | / | 24 | |
| Travel | X axis | mm | 1100 | 1100 | 1100 | 1100 |
| Y axis | mm | 900 | 900 | 900 | 900 | |
| Z axis | mm | 1100 | 1000 | 1100 | 1000 | |
| spindle center to table surface | mm | 80-980 | 30-930 | 80-980 | 30-930 | |
| spindle end face to table center | mm | 100-1200 | 200-1200 | 100-1200 | 200-1200 | |
| Controller | System | Fanuc/Siemens/Mitsubishi | ||||
| Total axes | 4 | |||||
| Accuracy | X/Y/Z axis positioning accuracy | mm | ±0.010/300 | |||
| X/Y/Z axis repositioning accuracy | mm | ±0.006/300 | ||||
| Rotary table positioning accuracy | " | ±8 | ±15 | ±8 | ±15 | |
| Rotary table repositioning accuracy | " | ±2 | ±6 | ±2 | ±6 | |
| Spindle | taper | BT50 | ||||
| maximum speed | rpm | 6000 | ||||
| drive type | belt | |||||
| Screw & Guide rail | X/Y/Z axis ball screw specification | mm | 5010/5010/5010(screw diameter=50mm;3 axis pitch=10mm) | |||
| X/Y/Z axis guide rail type | linear | |||||
| X/Y/Z axis guide rail width | mm | 55×2/55×2/55×2 | ||||
| *Tool magazine | Number of tools | T | 24 | |||
| Type | BT50/tool-arm type | |||||
| Motor power | Spindle motor | kw | 15/22 | |||
| X/Y/Z axis servo motor | kw | 7/9/7/1.6 | ||||
| Coolant pump motor | w | 750 | ||||
| Feed | Rapid feed | m/min | 24/24/24 | |||
| Cutting feed | m/min | 10/10/10 | ||||
| Others | Capacity | kva | 40 | |||
| Power | 380V/50HZ/3PH | |||||
| Air pressure | kg/cm2 | 6~8 | ||||
| Casting dimensions | mm | 3580×2520×2950 | 4420×2520×2950 | 3580×2520×2950 | 4420×2520×2950 | |
| Casting weight | kg | 9000 | 9500 | 9000 | 9500 | |
*Other optional configurations:probe,high pressure spindle outlet system,etc...
Our company specializes in manufacturing various horizontal machining centers, and you can also choose models such as W500/W800/W1000 to ensure that they meet your needs.
Q1:What's your main products of your company?
A1:We manufacture all kinds of CNC machine tools ,such as Vertical Machine Center, Horizontal Machine Center, 5 axis Machine Center, Gantry Machine Center, Engraving Machine Center.
Q2:How can I choose the most suitable machines ?
A2:If you are the factory, please tell us your specification request or workpiece drawing, we will suggest the suitable model for you.
If you are the trading company, please tell us your customer's request or we can introduce various models of our company.
Q3:Where is our factory located? Can I visit there?
A3:Our factory is located in Dongguan City, Guangdong Province, China. You are warmly welcome to visit us.
Q4:How is the warranty?
A4:One year.We will do our best to serviced.
Q5:How long is the delivery time for our products?
A5:Twenty days to one month.
Q6:How about your quality?
A6:We have approved the ISO9001:2015 Quality management system and CE European safety standards. Our products are exported to Russia, Vietnam and other countries.
Q7:What is the package?
A7:The machine is by waterproof cloth to covered. And a packed by standard exported wooden case. It is very safety for oversea transportation.
Q8:What's the Payment Terms ?
A8:T/T,30% initial payment when order,70% balance payment before shipment; Irrevocable LC. Other way can discuss according to different situation.
