Audited Supplier
M310T
1 Years
up to 3
IP65
PC, Printer
90X255X 40 mm
300, 600, 1200, 1800, 3600sec., off
-2000.0 to 2000.0 Mv
OEM
0.1 Mv
Haicoer
Wood Box
Shanghai, China
Product Description
M310T Multi-parameter Analyzer
Tilting stand Support better reading and operation
Multiple external devices available PC, printer
Wristbands Safety hold
GENERAL FEATURES
Color High contrast LCD touchscreen, 4.3 inches. Multi-reading feature allows auto-read, timed-read and continuous-read. Automatic/Manual temperature compensation ensures accurate results. Auto-hold feature senses and locks the measurement endpoint. Data capacity of up to 500 sets for each parameter (GLP-compliant). Support for USB communication. Auto-power off feature effectively extends the battery service life. Reset feature automatically resumes all settings back to factory default options. IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements.
pH 1-5 points calibration with Standard Recognition. Selectable pH buffer groups, including NIST, DIN, GB, USA. Automatic electrode diagnosis with pH slope and offset display.
Ion 1-5 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, ppb, etc. Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+?and etc., user-defined method is supported.Conductivity 1-3 points calibration with Standard Recognition. Settable parameters, including cell constant, temperature compensation coefficient, and TDS factor. Temperature compensation type (none, linear, pure water).
Ion 1-5 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, ppb, etc. Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+?and etc., user-defined method is supported.Conductivity 1-3 points calibration with Standard Recognition. Settable parameters, including cell constant, temperature compensation coefficient, and TDS factor. Temperature compensation type (none, linear, pure water).
DO Support for air-saturated water or zero oxygen calibration. Auto barometric pressure compensation Manual Salinity Factor Correction Selectable pressure unit, including kPa, mbar, Torr, Atm.
Model | M310T | |
Parameters | pH/EC/ISE/DO/Temp. (mV/pX/Resistivity/TDS/Sal./DO Saturation) | |
pH | Range | -2.00 to 20.00 pH |
Resolution | 0.1, 0.01 pH | |
Accuracy | ± 0.01 pH | |
Calibration Points | Up to 5 | |
Standard Customization | Yes | |
Calibration Reminder | Yes | |
Standard Recognition | NIST, GB, USA and DIN buffers | |
Slope Limit | Yes | |
mV | Range | -2000.0 to 2000.0 mV |
Resolution | 0.1 mV | |
Accuracy | ± 0.3 mV or ± 0.1% | |
pX | Range | -2.00 to 20.00 pX |
Resolution | 0.1, 0.01 pX | |
Accuracy | ± 0.01 pX | |
Calibration Points | Up to 5 | |
ISE | Range | 1.000e-9 to 9.999e+9 |
Units | mol/L, mmol/L, g/L, mg/L, μ g/L, ppm, ppb | |
Resolution | Up to 4 significant digits | |
Accuracy | ± 0.5% | |
Calibration Points | Up to 5 | |
Conductivity | Range | 0.000 μ S/cm to 1000 mS/cm |
Resolution | 0.001 μ S/cm minimum, various with range selection | |
Accuracy | ± 1.0% FS | |
Reference Temperature | 20, 25 ºC | |
Calibration Points | Up to 3 | |
Standard Recognition | 84 μ S/cm, 1413 μ S/cm, 12.88mS/cm | |
Resistivity | Range | 5.00 Ω ·cm~20.00 M Ω ·cm |
Resolution | 0.01 Ω ·cm minimum, | |
Accuracy | ± 1.0% FS | |
TDS | Range | 0.00 ppm~300 ppt |
Resolution | 0.01mg/L minimum, 3 significant digits | |
Accuracy | ± 1.0%FS | |
Salinity | Range | 0.0~80.0 ppt |
Resolution | 0.1ppt | |
Accuracy | ± 2ppt | |
Dissolved Oxygen Concentration | Sensor Type | Polarographic |
Range | 0.00 to 50.00 ppm | |
Resolution | 0.01mg/L | |
Accuracy | ± 0.10ppm | |
Calibration Points | Air-saturated water or zero point | |
Barometric Compensation | Yes | |
Manual Salinity Factor Correction | Yes | |
Saturation | Range | (0.0 to 300.0)% |
Resolution | 0.10% | |
Accuracy | ± 2.0% | |
Temperature | Range | -5 to 110 ºC, 23.0 to 230 ºF |
Unit | ºC, ºF | |
Resolution | 0.1 | |
Relative Accuracy | ± 0.2 | |
Measurement | Reading Mode | Auto-Read (Fast, Medium, Slow), Timed, Continuous |
Reading Prompts | Reading, Stable, Locked | |
Temp. Compensation | ATC, MTC | |
Data management | Data Storage | 1000 Groups |
GLP Features | Yes | |
Inputs | pH Electrode | BNC(Q9) |
DO with Temp. Probe | 4-pin aviation connector | |
Conductivity with Temp. Probe | 5-pin aviation connector | |
Outputs | USB | PC, printer |
Display options | Backlight | Yes |
Auto Shutdown | 300, 600, 1200, 1800, 3600sec., off | |
IP Rating | IP65 | |
Date and Time | Yes | |
General | Power | Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output |
Dimensions | 90 x 255 x 40 mm | |
Weight | 500g (1.1 lb) | |
Q1What is your minimum order quantity?
A1The minimum order quantity is very low, and the minimum order is one set. For customized projects, it depends on different requirements.
Q2Do you offer guarantee for the products?
A2Yes, we offer 1-2 years warranty to our products.
Q3What is the delivrey time after an drder placed?
A3Our standard delivery is 3-5days when we have stock.We will let you know the lead time according to your oder quantity in time.
Q4What is the warranty?
A4The free warranty is one year from the day of Commissioning qualified.
Q5Can you tell me your main customers?
A5Sorry we could not tell you except customer's permission. At the same time,your information also will be protected.
Q6How can i get the after-service?
A6We will be responsible for our products in the valid time.
A1The minimum order quantity is very low, and the minimum order is one set. For customized projects, it depends on different requirements.
Q2Do you offer guarantee for the products?
A2Yes, we offer 1-2 years warranty to our products.
Q3What is the delivrey time after an drder placed?
A3Our standard delivery is 3-5days when we have stock.We will let you know the lead time according to your oder quantity in time.
Q4What is the warranty?
A4The free warranty is one year from the day of Commissioning qualified.
Q5Can you tell me your main customers?
A5Sorry we could not tell you except customer's permission. At the same time,your information also will be protected.
Q6How can i get the after-service?
A6We will be responsible for our products in the valid time.
