
Technical parameter
Raw material: waste office paper,wood pulp
Output paper: white writing paper
Output paper weight: 40-60g/m2
Wire width: 1950mm
Capacity: 10T/D
Drive way: Alternating current frequency conversion adjustable speed, sectional drive.
The structure and specifications of main equipment :
3. Dryer part: alloy dryer can 6 sets.
4. Calendering part: three-roll calender 1 set.
5. Winding part: equipped with horizontal pneumatic winding machine 1 set.
6. Rewinding part: equipped with frame type upper feeding rewinding machine 1 set.
Main structure with spec for stock preparation
| No. | Equipment | Function |
| 1 | 5m3 high consistency hydra-pulper | to stir the raw materials at high speed and make them into pulp for the first step |
| 2 | High consistency pulp cleaner | to remove the heavy big impurities in the pulp |
| 3 | High-speed pulp washer | to wash out the waste water from the pulp, make the pulp clean |
| 4 | 0.6m2 Pressure screen | to screen out the impurities in the pulp by high pressure |
| 5 | 1.8m2 Vibrating screen | to screen out the impurities through vibrating |
| 6 | Low consistency pulp cleaner | to remove the sands and tiny impurities in the water and pulp |
| 7 | Φ380mm double-disc pulp refiner | to grind the coarse pulp into fine pulp |
| 8 | Φ700mm propeller | to stir and resolve the pulp in pulp pool |
| 9 | 0.3m2 Pressure screen | to defibering pulp |
| 10 | pulp pump | to lift the processed pulp into the necessary section |
| 11 | water pump | to lift the water into the necessary section |
| 12 | Electrical operating cabinet | to control the on/off of the whole production line |




Company:








Audited Supplier










