Audited Supplier
CMT4502
Available
1year
0.5
Electronic Load
Computer Control
100-500Kg
AC220V
0.5 Level
0.4% - 100%Fs(No Grading)
500000fs
0.2~ 100% Fs
Within ±0.50%
500000fs
Sansi Yongheng Techology
Wooden Box
700*510*1940mm
China
9024800000
Product Description
• Main functions of Machine
This Machine is suitable for the test and analysis of the mechanical properties of metal materials, metal materials and composites. It can be used for tensile, compression, bending, shearing, tearing, peeling, bursting, fatigue and other tests when equipped with corresponding fittings. The maximum test value, breaking value, elongation, tensile strength, yield strength, compressive strength, modulus of elasticity, shear strength, tear strength, peel strength and other parameters can be calculated dynamically. At the same time, it can also realize the testing of the requirements of constant elongation stress, constant strain elongation and load holding. It has three closed-loop control modes of stress, strain and displacement. The machine is widely used in the material inspection and analysis of building materials, aerospace, machinery manufacturing, wire and cable, rubber and plastic, automobile manufacturing, powder metallurgy and other industries. It is a scientific research institute, colleges and universities, mining enterprises, technical supervision Ideal test equipment for commodity inspection and arbitration departments.
• Main frame:
The upper crossbeam and worktable are fixed with high-strength light bars to form a high rigidity frame structure; The high-precision ball screw without clearance is adopted to improve the transmission efficiency and displacement accuracy; The coaxiality of the testing machine is good (<8%). The upper, middle and lower beams are made of QT600-3 ductile iron with tensile strength of 60k (600MPa) and yield strength of 40k (400Mpa). The corrosion resistance and oxidation resistance of ductile iron are better than that of cast steel. Due to the microstructure of nodular graphite of ductile iron, it is better than cast steel in reducing vibration energy, so it is more conducive to reducing stress.
• Control transmission system:
The internationally leading full-digital imported AC servo motor with high control accuracy and high response frequency is adopted to ensure high efficiency, low noise and balanced transmission of the transmission system, and the allowable speed error is not more than ± 0.2%. The maximum test speed range is 0.001~1000mm/min. The circular arc tooth synchronous belt transmission has the advantages of high transmission accuracy, transmission efficiency of 98%, more accurate, stable and low noise.
• Force measuring sensor:
Adopt imported strain gauge load sensor with high stability and precision; The high-precision measurement system with high stability ensures that the resolution of the whole process remains unchanged, and the maximum error of the test force indication is not more than ± 0.5%. Multiple load sensors can be used according to different ways to realize the multi-range test force range measurement; Good temperature compensation, high sensitivity, high rigidity and good long-term stability.
• Fixture
Standard special clamps for various materials are easy to operate and reliable to hold. They can be equipped with pneumatic and hydraulic wedge-shaped clamps and horizontal push hydraulic clamps to greatly improve work efficiency. The clamping force can be adjusted to meet the test requirements of different materials of users, and can also be customized according to customer needs;
• CMT3200 servo control system
Real-time and dynamic display of test process and test curve, data processing through modular software, data re-analysis and editing of curve amplification, output of test reports and curve patterns in different formats, and support networking for data transmission.
• DCH80 is a manual control box with LCD display and electronic universal testing machine controller CMT3200. This product supports the display of load, displacement and displacement speed, and can perform simple operations on the electronic universal testing machine without the computer, such as fast rise, fast fall, slow rise, slow fall, return, sample protection, etc.
The new DCH80 series LCD control panel includes a set of function control keys and real-time display screen to simplify the test steps and improve data reproducibility;
² Real-time display of test data, real-time display of force, displacement, displacement speed and other data, reduce the frequent switching operation between the operator panel and the IPC workstation, and facilitate the operator to conduct the test accurately and efficiently;
² Real-time display of operation status, connection status of LCD operation panel and movement direction of loading beam;
Precise positioning key, precise fine adjustment key with inching anti-lock function may use CMT3200 software to configure any speed, and can control the equipment to move at a speed as low as 0.001/min during sensitivity test.
The moving key for beam loading and commissioning controls the beam loading to reach the test operation area smoothly and quickly. The stepless speed change operation has the buffer protection function of loading and parking, which greatly facilitates the rapid adjustment of the test bench and ensures the long-term stable and efficient operation of the host.
² Test run control key: after using CMT3200 software to input the sample size and control scheme in advance, the tester can leave the IPC workstation and complete the test of all samples through the "Run", "Stop" and "Reset" keys on the control panel to improve the test efficiency.
Innovative ergonomic design, supporting new user experience, large screen;
• Introduction to the CMT3200 servo control system of Sanshiheng:
CMT3200 controller system uses the servo measurement and control box and measurement and control software developed by our company to form the measurement and control system. The measurement unit uses high-precision load sensor, rotary photoelectric encoder and electronic extensometer, which can realize the three closed-loop control of load, displacement and deformation of the electronic universal testing machine, and can achieve smooth switching between the three control modes, and also can achieve low cycle fatigue test, It has the characteristics of high control accuracy, strong adaptability and good stability.
² Adopt Cortex_ The 32-bit high-speed ARM chip of M3 is used as the main control chip, which has high-speed operation speed and high-speed data processing ability, so as to achieve accurate closed-loop control of the testing machine;
² Support data acquisition of 6 channels and independent control of 6 channels;
The 6-channel channel supports online sensor identification, and the calibration table does not need to be modified to replace the sensor.
² Built-in expansion interface, combined with external acquisition module, can collect various types of sensor signals;
The load channel and extensometer channel can support up to 1.6KHz acquisition and control, the maximum effective sampling code can reach 500000, and the sampling frequency can be switched at any time;
The photoelectric encoder position acquisition module uses a special hardware module with a built-in 24-level filter to reshape and filter the collected pulse signal, avoiding the error count caused by the interference of the position pulse acquisition system, and more effectively ensuring the position measurement accuracy.
It has internal and external 2-way load sensor interfaces and can be connected to 2-way load sensors at the same time;
It supports 1 channel of large deformation channel, 2 channels of photoelectric encoder signals, and composite control algorithms such as sum, difference and average.
It supports three closed-loop control modes of load, displacement and deformation (including extensometer, large deformation and dial indicator), and can switch between the three control modes at will;
It adopts Ethernet communication interface, supports automatic online scheme, and does not need to set IP address.
• Main technical parameters of machine:
About us
Our factory
Our team
This Machine is suitable for the test and analysis of the mechanical properties of metal materials, metal materials and composites. It can be used for tensile, compression, bending, shearing, tearing, peeling, bursting, fatigue and other tests when equipped with corresponding fittings. The maximum test value, breaking value, elongation, tensile strength, yield strength, compressive strength, modulus of elasticity, shear strength, tear strength, peel strength and other parameters can be calculated dynamically. At the same time, it can also realize the testing of the requirements of constant elongation stress, constant strain elongation and load holding. It has three closed-loop control modes of stress, strain and displacement. The machine is widely used in the material inspection and analysis of building materials, aerospace, machinery manufacturing, wire and cable, rubber and plastic, automobile manufacturing, powder metallurgy and other industries. It is a scientific research institute, colleges and universities, mining enterprises, technical supervision Ideal test equipment for commodity inspection and arbitration departments.
• Main frame:
The upper crossbeam and worktable are fixed with high-strength light bars to form a high rigidity frame structure; The high-precision ball screw without clearance is adopted to improve the transmission efficiency and displacement accuracy; The coaxiality of the testing machine is good (<8%). The upper, middle and lower beams are made of QT600-3 ductile iron with tensile strength of 60k (600MPa) and yield strength of 40k (400Mpa). The corrosion resistance and oxidation resistance of ductile iron are better than that of cast steel. Due to the microstructure of nodular graphite of ductile iron, it is better than cast steel in reducing vibration energy, so it is more conducive to reducing stress.
• Control transmission system:
The internationally leading full-digital imported AC servo motor with high control accuracy and high response frequency is adopted to ensure high efficiency, low noise and balanced transmission of the transmission system, and the allowable speed error is not more than ± 0.2%. The maximum test speed range is 0.001~1000mm/min. The circular arc tooth synchronous belt transmission has the advantages of high transmission accuracy, transmission efficiency of 98%, more accurate, stable and low noise.
• Force measuring sensor:
Adopt imported strain gauge load sensor with high stability and precision; The high-precision measurement system with high stability ensures that the resolution of the whole process remains unchanged, and the maximum error of the test force indication is not more than ± 0.5%. Multiple load sensors can be used according to different ways to realize the multi-range test force range measurement; Good temperature compensation, high sensitivity, high rigidity and good long-term stability.
• Fixture
Standard special clamps for various materials are easy to operate and reliable to hold. They can be equipped with pneumatic and hydraulic wedge-shaped clamps and horizontal push hydraulic clamps to greatly improve work efficiency. The clamping force can be adjusted to meet the test requirements of different materials of users, and can also be customized according to customer needs;
• CMT3200 servo control system
Real-time and dynamic display of test process and test curve, data processing through modular software, data re-analysis and editing of curve amplification, output of test reports and curve patterns in different formats, and support networking for data transmission.
• DCH80 is a manual control box with LCD display and electronic universal testing machine controller CMT3200. This product supports the display of load, displacement and displacement speed, and can perform simple operations on the electronic universal testing machine without the computer, such as fast rise, fast fall, slow rise, slow fall, return, sample protection, etc.
The new DCH80 series LCD control panel includes a set of function control keys and real-time display screen to simplify the test steps and improve data reproducibility;
² Real-time display of test data, real-time display of force, displacement, displacement speed and other data, reduce the frequent switching operation between the operator panel and the IPC workstation, and facilitate the operator to conduct the test accurately and efficiently;
² Real-time display of operation status, connection status of LCD operation panel and movement direction of loading beam;
Precise positioning key, precise fine adjustment key with inching anti-lock function may use CMT3200 software to configure any speed, and can control the equipment to move at a speed as low as 0.001/min during sensitivity test.
The moving key for beam loading and commissioning controls the beam loading to reach the test operation area smoothly and quickly. The stepless speed change operation has the buffer protection function of loading and parking, which greatly facilitates the rapid adjustment of the test bench and ensures the long-term stable and efficient operation of the host.
² Test run control key: after using CMT3200 software to input the sample size and control scheme in advance, the tester can leave the IPC workstation and complete the test of all samples through the "Run", "Stop" and "Reset" keys on the control panel to improve the test efficiency.
Innovative ergonomic design, supporting new user experience, large screen;
• Introduction to the CMT3200 servo control system of Sanshiheng:
CMT3200 controller system uses the servo measurement and control box and measurement and control software developed by our company to form the measurement and control system. The measurement unit uses high-precision load sensor, rotary photoelectric encoder and electronic extensometer, which can realize the three closed-loop control of load, displacement and deformation of the electronic universal testing machine, and can achieve smooth switching between the three control modes, and also can achieve low cycle fatigue test, It has the characteristics of high control accuracy, strong adaptability and good stability.
² Adopt Cortex_ The 32-bit high-speed ARM chip of M3 is used as the main control chip, which has high-speed operation speed and high-speed data processing ability, so as to achieve accurate closed-loop control of the testing machine;
² Support data acquisition of 6 channels and independent control of 6 channels;
The 6-channel channel supports online sensor identification, and the calibration table does not need to be modified to replace the sensor.
² Built-in expansion interface, combined with external acquisition module, can collect various types of sensor signals;
The load channel and extensometer channel can support up to 1.6KHz acquisition and control, the maximum effective sampling code can reach 500000, and the sampling frequency can be switched at any time;
The photoelectric encoder position acquisition module uses a special hardware module with a built-in 24-level filter to reshape and filter the collected pulse signal, avoiding the error count caused by the interference of the position pulse acquisition system, and more effectively ensuring the position measurement accuracy.
It has internal and external 2-way load sensor interfaces and can be connected to 2-way load sensors at the same time;
It supports 1 channel of large deformation channel, 2 channels of photoelectric encoder signals, and composite control algorithms such as sum, difference and average.
It supports three closed-loop control modes of load, displacement and deformation (including extensometer, large deformation and dial indicator), and can switch between the three control modes at will;
It adopts Ethernet communication interface, supports automatic online scheme, and does not need to set IP address.
• Main technical parameters of machine:
| Series | CMT4000 | CMT5000 | ||
| Model | 4502,4103,4203,4503,4104,4204,4304 | 5504,5104,5205,5305,5505,5605 | ||
| Measuring parameters | Maximum experimental force | 500N,1,2,5,10,20,30KN | 50,100,200,300,500,600KN | |
| Test machine level | 0.5 level | |||
| Measurement range | 0.4% - 100%FS(No grading) | |||
| Relative error of experimental force indication | ±0.5% | |||
| Testing force resolution | 500000FS | |||
| Deformation measurement range | 0.2~ 100% FS | |||
| Relative error of deformation indication | Within ±0.50% | |||
| Deformation resolution | 500000FS | |||
| Large deformation measurement range | 10- 800mm | |||
| Relative error of large deformation indication | Within ±0.50% | |||
| Large deformation resolution | 0.008mm | |||
| Relative error of beam displacement indication | Within ±0.50% | |||
| Displacement resolution | 0.03μm | |||
| Control parameters | Force control rate adjustment range | 0.005 ~ 5% FS/S | ||
| Relative error of force control rate | Within ± 1% of the set value | |||
| Deformation rate adjustment range | 0.02 - 5% FS/S | |||
| Relative error of deformation control rate | When the rate is less than 0.05% FS, it is within ± 2% of the set value: When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value | |||
| Beam speed adjustment range | 0.001 - 500mm/min | |||
| Relative error of beam speed | When the speed is less than 0.01 mm/min, within ± 1.0% of the set value; When the speed is ≥ 0.01 mm/min, within ± 0.2% of the set value | |||
| Control range of constant force, constant deformation and constant displacement | 0.5% ~ 100% FS | |||
| control accuracy of constant force, constant deformation and constant displacement | When the set value ≥ 10% FS, within ± 0.1% of the set value; When the set value is less than 10% FS, within ± 1% of the set value | |||
| other | Effective test width | 400mm | 600mm | |
| Maximum stroke of beam (including clamp) | 950mm (single space) 740mm (double space) | 600mm (single space) 400mm (double space) | ||
| Dimension | 700mm×510mm×1940mm | 1063×650×2268mm (50/100kn) 1080×800×2485mm (200/300kn) 1360×1030×2830mm (500/600kn) | ||
| Power Supply | 220V±10%;400W (below 3t)/750W | 380V±10%;1-5.5KW | ||
| Weight | 400kg | About 1200kg/about1800kg/about2000kg | ||
About us
Sansi Yongheng Technology (Zhejiang) Co., Ltd. is a comprehensive professional test instrument manufacturer specializing in R & D, production, manufacturing, sales and after-sales technical services. Sansi Yongheng Technology (Zhejiang) Co., Ltd. acquired the technology R & D, team work and sales team of Shanghai Xinbiao Testing Instrument Manufacturing Co., Ltd., a wholly-owned subsidiary in 2018. "Shanghai Xinbiao Instrument" was established in 2009 as a professional R & D and the manufacturer of production material performance testing equipment, mainly involves: electronic universal testing machine, hydraulic universal testing machine, coating thickness gauge and metallographic consumables three series of products. Since the establishment of Sansi Yongheng Company in 2018, it has launched a new Sansi Yongheng brand series of products, mainly involving: CMT series electronic universal, SHT series hydraulic universal, CTT series torsion testing machine, ZBC series plastic special machine, MTY series dynamic fatigue testing machine, main products Used in rubber, plastic, metallurgy, iron, steel, wire, cable and other fields; application industries include automobiles, mobile phones, electronic appliances, medical, photovoltaic, paper, textile, road and bridge, aviation, aerospace, scientific research institutions, inspection and quarantine and other industries .
Our factory
Our team
