Audited Supplier
YL32
12 Months
High Efficiency
Customized
New
Overseas Service Center Available
1000
1500
1600*1500
150mm/S
5-12mm/S
BAIXING
Stankard
35t
Shandong
Product Description
The 800 tons three-beam four-column hydraulic press is suitable for all kinds of plastic large basin plastic bucket plastic tray molding
Machine is mainly composed by host machine,hydraulic control system,electrical control system,lubrication system and Safety protection system.
Equipment operation mode for the:hand movement,semi-automatic,two ways.elect by the conversion operation panel switch. Time pressure and can be preset in the 0~999 s range.hand movement: The function button pressing the corresponding, Corresponding to complete an action. The hand moves through to the end. But not the sender of the next action.
semi-automatic: Press the pressing button, Automatic completion of a prescribed action cycle
| NO. | NAME | UNIT | |||
| 1 | (Nominal capacity) | KN | 10000 | ||
| 2 | Ejection nominal force) | KN | 2000 | ||
| 3 | (The maximum working pressure of the fluid) | MPa | 25 | ||
| 4 | Slider is valid stroke | mm | 800 | ||
| 5 | Ejection stroke | mm | 300 | ||
| 6 | Maximum opening height | mm | 1250 | ||
| 7 | Minimum closing height | mm | 450 | ||
| 8 | Effective area of the workbench | L/R | mm | 1350 | |
| F/B | mm | 1300 | |||
| 9 | Slider speed | Fast down | mm/s | 120 | |
| work speed | mm/s | 5-12 | |||
| Return speed | mm/s | 80 | |||
| 10 | motor power | KW | 44 | ||
Equipment work area temperature: -5~45ºC(±)
Electric supply: three-phase four-wire system 380V.50HZ. scope range of the fluctuation of voltage 380V±10%
Hydraulic system using the medium: 46#anti-wear hydraulic oil
Application Case - Pressed products
