Audited Supplier
H-Frame High Speed Presses DDH Series from 45 to 500 Tons
DDH series is QIAOSEN H-Frame High Speed Press Machine,it's designed for stamping production of stator rotor stamping(Motor Core Lamination).
DDH series presses are produce by Qiaosen machine, which built to meet or exceed JIS Class 1 accuracy standards. The frame of the machine is made of high-strength cast iron, which is most suitable for continuous punching and forming production because of its stable material and constant precision after internal stress relief. which can make the press machine have minimizing deflection and high accuracy and provide increased tool life.
| Specifications | Press capacity | Rated tonnage point | Slider stroke length | Slider strokes per minute | Bolster area |
| Unit | ton | mm | mm | s.p.m | mm |
| DDH-125 | 125 | 2 | 30 | 300-1200 | 1400*850 |
| Bed opening | Slide area | Die height adjustment stroke | The mode height adjustment motor | Outline Dimension | Main motor |
| mm | mm | mm | kw | mm | kw |
| 1100*200 | 1400*600 | 360-410 | 0.75 | 2350*1800*3550 | 37 |
| > | Electric die height adjustment | > | Hydraulic base screw pile |
| > | Die height display accuracy 0.01 | > | Hydraulic mold lifter and mold arm |
| > | Inching function, single action function, linkage function | > | Lubricating cooling circulation machine |
| > | Linkage with 0 ° and 90 ° positioning-stop function | > | Independent electric control box |
| > | Slide pad | > | Host forward and reverse device |
| > | Emergency stop function | > | Separate brake clutch |
| > | Six groups of batch control | > | Spring type shockproof foot pads |
| > | Two sets of chute control | > | Maintenance Tools and Toolboxes |
| > | Oil pressure locking mold | > | LED die lighting |
| > | Gear feeder | > | Tonnage detector |
| > | NC servo feeder | > | Bottom dead center monitor |
| > | Double head material rack | > | Electric control box air conditioning |
| > | S-type leveling machine | > | Variable frequency permanent magnet motor |
with small deformation
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Features
- The internal oil circuit of the crankshaft is designed to restrain the thermal deformation of the crankshaft.
- The press has its own special technology to control the clearance.
- Adjustable gaskets to restore equipment accuracy with minimal cost.
- The frame pull rod and slide guide are integrated, and the structure is compact and reasonable. The slide guide is guided by ball, with high precision.
- Hydraulic locking rod, the stability can be maintained for a long time.
- The separate clutch brakes on both sides balance the force on the crankshaft and reduce bearing wear.
- The rigidity of the press frame shall be strictly controlled by 1/15000, and the frame material shall be strictly controlled by QT500-7
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
| FAQ | |
| Q: | Are you a factory or trading company? |
| A: | We are an integrated company of industry and trade. |
| Q: | What are your main products? |
| A: | We specialize in manufacturing power press machine, decoiler straightener and feeder, metal stamping die, transfer arms etc. (we could help customers contract to build the whole stamping line projects.) |
| Q: | What's the delivery time? |
| A: | The standard machine is 25 to 30 days after payment. If asked to supply whole production line by our customer, we will confirm the delivery time based on the specific project itself. |
| Q: | What's your payment term? |
| A: | we advise 30% T/T deposit, balance paid before shipment. |
| Q: | Do you receive OEM? |
| A: | Yes, we warmly welcome customers to do OEM in our factory. |
