Audited Supplier
STC-SV
on Line Available
1 Year
High-Speed Punching Machine
Closed Punch
Single Action
Crank Press
Artificial
Automatic
Mechanical Drive
High Precision
CE, ISO 9001
New
Crankshaft, Gearshaft, Motor, Sliderail
Pressing Metal Products
Provided
Customizable
65 Tons
Qiao Sen
Standard Export Package
STC-SV
Jiangsu, China
84629910
Product Description
| Name | Unit | STC-110sv | STC-160sv | STC-200sv | STC-250sv | STC-315sv |
| Press capacity | Ton | 110 | 160 | 200 | 250 | 315 |
| Impact force location | mm | 4 | 5 | 5 | 5.5 | 6 |
| Slider strokes per minute(S.P.M) | Swing mode | ~100 | ~100 | ~95 | ~70 | ~65 |
| Full stroke | ~50 | ~50 | ~50 | ~40 | ~40 | |
| Slider stroke length | mm | 180 | 200 | 250 | 280 | 280 |
| Max mold height | mm | 400 | 450 | 500 | 550 | 550 |
| Slider adjustment amount | mm | 100 | 100 | 120 | 120 | 120 |
| Slide Area | mm | 1400*500 | 1600*550 | 1850*650 | 2100*700 | 2200*700 |
| Slide Thickness | mm | 70 | 70 | 95 | 95 | 95 |
| Bolster Area | mm | 1800*650 | 2000*760 | 2400*840 | 2700*900 | 2800*900 |
| Bolster Thickness | mm | 130 | 150 | 170 | 170 | 190 |
| Main servo motor torque | Nm | 5000 | 9000 | 12500 | 16000 | 20500 |
| Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 |
| Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 |
| Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. | ||||||
| > | QS operating system | > | Second degree falling protecting device |
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Electronic cam device | > | Mechanical shockproof feet |
| > | Electric slider adjusting device | > | Mis-feeding detection device reserved interface |
| > | Variable frequency variable speed motor (adjustable speed) | > | Maintenance tools and toolbox |
| > | Air blowing device | > | Main motor reversing device |
| > | Digital die height indicator | > | Light Curtain (Safety Guarding) |
| > | Slider and stamping tools balance device | > | Power outlet |
| > | Rotating cam controller | > | Electric grease lubrication device |
| > | Crankshaft angle indicator | > | Touch screen (pre-break, pre-load) |
| > | Electromagnetic counter | > | Fixed two-handed operating console |
| > | Air source connector | > | LED die lighting |
| > | Electric die height adjustment | > | Hydraulic base screw pile |
| > | Die height display accuracy 0.01 | > | Hydraulic mold lifter and mold arm |
| > | Inching function, single action function, linkage function | > | Lubricating cooling circulation machine |
| > | Linkage with 0 ° and 90 ° positioning-stop function | > | Independent electric control box |
| > | Slide pad | > | Host forward and reverse device |
| > | Emergency stop function | > | Separate brake clutch |
| > | Six groups of batch control | > | Spring type shockproof foot pads |
| > | Two sets of chute control | > | Maintenance Tools and Toolboxes |
| > | Oil pressure locking mold | > | LED die lighting |
High strength steel frames
with small deformation
with small deformation
Slide rail adopt high frequency quenching technology,
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Crankshaft
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Ball Seat
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Features
- The internal oil circuit of the crankshaft is designed to restrain the thermal deformation of the crankshaft.
- The press has its own special technology to control the clearance.
- Adjustable gaskets to restore equipment accuracy with minimal cost.
- The frame pull rod and slide guide are integrated, and the structure is compact and reasonable. The slide guide is guided by ball, with high precision.
- Hydraulic locking rod, the stability can be maintained for a long time.
- The separate clutch brakes on both sides balance the force on the crankshaft and reduce bearing wear.
- The rigidity of the press frame shall be strictly controlled by 1/15000, and the frame material shall be strictly controlled by QT500-7
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
| FAQ | |
| Q: | Are you a factory or trading company? |
| A: | We are an integrated company of industry and trade. |
| Q: | What are your main products? |
| A: | We specialize in manufacturing power press machine, decoiler straightener and feeder, metal stamping die, transfer arms etc. (we could help customers contract to build the whole stamping line projects.) |
| Q: | What's the delivery time? |
| A: | The standard machine is 25 to 30 days after payment. If asked to supply whole production line by our customer, we will confirm the delivery time based on the specific project itself. |
| Q: | What's your payment term? |
| A: | we advise 30% T/T deposit, balance paid before shipment. |
| Q: | Do you receive OEM? |
| A: | Yes, we warmly welcome customers to do OEM in our factory. |
