Audited Supplier
1224
Flexible
Non Flow Production Line
Comprehensive
Product Line
Concurrent Engineering
CE
New
Automatic
Overseas Service Center Available
Customizaton
120-150 PCS/Min
Kraft Carton Printing
Full- Automatic
1-6 Printing Unit
2-11mm
SOOME
Package with Plastic Film
1224
China
8441309000
Product Description
Machine profile:
This machine adopt manual sheets supplying, vacuum suction type automatic lead edge feeding. Can finish corrugated cardboard printing, slotting, corner cutting, edge slitting, creasing, etc functions at the same time. Electrical carton height adjustment, equipped with ruler for easy size checking. The phase of slotting adjustment device is planetary gears structure, adopt electrical adjustment in 360 degree. Above slotter and down knife holders and creasers can move left-right synchronously manually by professional tools. It is easy and convenient in using and maintenance, small and delicate, specially for small cartons printing slotting and forming.
Machine Parameters:
Printing Unit:
1) The clutch of the electric control machine is equipped with an alarm bell, and the alarm rings continuously during the running to ensure the safety of the operators.
2) The transmission shaft is equipped with a safety clutch to avoid damage to the machine due to malfunction (the main machine cannot start and run when the machine is not locked).
3) Pneumatic interlocking device.
4) Host motor start protection device.
2. Front edge feeding system& Printing unit
1) Guangdong Shenzhen Hengli Junxing 4 private server double bellows paper feeding system, 7.5 kilowatts fan, suction assists paper feeding, and can adjust the air volume according to the degree of cardboard bending to ensure smooth paper feeding. Frequency Control,
2) Electric side gear adjustment, pneumatic alignment, PLC control, touch screen input digital automatic adjustment, convenient and quick adjustment.
3) Taiwan's ultra-resistant leading edge paper feed roller, durable and wear-resistant.
4) Paper supply counter, set and display the production quantity. touch screen display
5) The outer diameter is φ395.6mm(including the plate outer diameter φ410mm).
6) Steel plate material, surface grinding, hard chrome plating.
7) Balance correction, stable operation.
8) Ratchet fixed winding shaft.
9) The full-format plate groove is suitable for 9mm hanging plate.
10) Loading and unloading the printed board, and the foot switch is electric to make positive and negative rotation.
11) The printing roller is electrically adjusted horizontally to pull the plate, and the adjustment range is 10mm .
Slotting Unit:
Grooving part: ( electric quadruple die-cutting ) The picture is for reference only
The structure is brief; the lower cutterhead is equipped with a Youli knife card holder, and the upper foot is connected to the head pad stick. One-key adjustment, the four-joint cutter head moves left and right synchronously with the two front pressure lines, and realizes one-key adjustment of length, width and height.
1) All gaps can be manually adjusted conveniently and quickly. Adjustment range 0-1 1mm
Die cutter roller:
1) the standard template with a roller diameter of 360, the surface is ground and hard-coated
2) Balance correction to increase running stability.
3) The distance between the fixing screw holes of the knife mold is 100mm in the axial direction, and 18 equal parts in the radial direction
4) Use a crimping height of 22.6mm
5) wood formwork thickness 13mm
This machine adopt manual sheets supplying, vacuum suction type automatic lead edge feeding. Can finish corrugated cardboard printing, slotting, corner cutting, edge slitting, creasing, etc functions at the same time. Electrical carton height adjustment, equipped with ruler for easy size checking. The phase of slotting adjustment device is planetary gears structure, adopt electrical adjustment in 360 degree. Above slotter and down knife holders and creasers can move left-right synchronously manually by professional tools. It is easy and convenient in using and maintenance, small and delicate, specially for small cartons printing slotting and forming.
Machine Parameters:
| Item | Unit | Model 1224 |
| Max. Printing area | mm | 1200*2400 |
| Max. feeding size | mm | 1200*2500 |
| Min. Paper size (LxW) | mm | 360*600 |
| Printing plate thickness | mm | 6 |
| Suitable paper thickness | mm | 3~11 |
| Max. Machine speed | sheets/min | 120 |
| Economic speed | sheets/min | 80-100 |
| Overprinting precision | mm | ±0.5 |
| Slotting precision | mm | ±0.5 |
| Diecutting precision | mm | ±0.5 |
Printing Unit:
1) The clutch of the electric control machine is equipped with an alarm bell, and the alarm rings continuously during the running to ensure the safety of the operators.
2) The transmission shaft is equipped with a safety clutch to avoid damage to the machine due to malfunction (the main machine cannot start and run when the machine is not locked).
3) Pneumatic interlocking device.
4) Host motor start protection device.
2. Front edge feeding system& Printing unit
1) Guangdong Shenzhen Hengli Junxing 4 private server double bellows paper feeding system, 7.5 kilowatts fan, suction assists paper feeding, and can adjust the air volume according to the degree of cardboard bending to ensure smooth paper feeding. Frequency Control,
2) Electric side gear adjustment, pneumatic alignment, PLC control, touch screen input digital automatic adjustment, convenient and quick adjustment.
3) Taiwan's ultra-resistant leading edge paper feed roller, durable and wear-resistant.
4) Paper supply counter, set and display the production quantity. touch screen display
5) The outer diameter is φ395.6mm(including the plate outer diameter φ410mm).
6) Steel plate material, surface grinding, hard chrome plating.
7) Balance correction, stable operation.
8) Ratchet fixed winding shaft.
9) The full-format plate groove is suitable for 9mm hanging plate.
10) Loading and unloading the printed board, and the foot switch is electric to make positive and negative rotation.
11) The printing roller is electrically adjusted horizontally to pull the plate, and the adjustment range is 10mm .
Slotting Unit:
Grooving part: ( electric quadruple die-cutting ) The picture is for reference only
The structure is brief; the lower cutterhead is equipped with a Youli knife card holder, and the upper foot is connected to the head pad stick. One-key adjustment, the four-joint cutter head moves left and right synchronously with the two front pressure lines, and realizes one-key adjustment of length, width and height.
1) All gaps can be manually adjusted conveniently and quickly. Adjustment range 0-1 1mm
2 ) Equipped with an emergency stop device to ensure safety.
3 )The lateral movement of the cutter head is controlled by a motor , and the adjustment speed is fast and the precision is high.
Die cutter roller:1) the standard template with a roller diameter of 360, the surface is ground and hard-coated
2) Balance correction to increase running stability.
3) The distance between the fixing screw holes of the knife mold is 100mm in the axial direction, and 18 equal parts in the radial direction
4) Use a crimping height of 22.6mm
5) wood formwork thickness 13mm
